214 research outputs found

    Reliable machine-to-machine multicast services with multi-radio cooperative retransmissions

    Get PDF
    The final publication is available at Springer via http://dx.doi.org/10.1007/s11036-015-0575-6The 3GPP is working towards the definition of service requirements and technical solutions to provide support for energy-efficient Machine Type Communications (MTC) in the forthcoming generations of cellular networks. One of the envisioned solutions consists in applying group management policies to clusters of devices in order to reduce control signaling and improve upon energy efficiency, e.g., multicast Over-The-Air (OTA) firmware updates. In this paper, a Multi-Radio Cooperative Retransmission Scheme is proposed to efficiently carry out multicast transmissions in MTC networks, reducing both control signaling and improving energy-efficiency. The proposal can be executed in networks composed by devices equipped with multiple radio interfaces which enable them to connect to both a cellular access network, e.g., LTE, and a short-range MTC area network, e.g., Low-Power Wi-Fi or ZigBee, as foreseen by the MTC architecture defined by ETSI. The main idea is to carry out retransmissions over the M2M area network upon error in the main cellular link. This yields a reduction in both the traffic load over the cellular link and the energy consumption of the devices. Computer-based simulations with ns-3 have been conducted to analyze the performance of the proposed scheme in terms of energy consumption and assess its superior performance compared to non-cooperative retransmission schemes, thus validating its suitability for energy-constrained MTC applications.Peer ReviewedPostprint (author's final draft

    Network coding meets multimedia: a review

    Get PDF
    While every network node only relays messages in a traditional communication system, the recent network coding (NC) paradigm proposes to implement simple in-network processing with packet combinations in the nodes. NC extends the concept of "encoding" a message beyond source coding (for compression) and channel coding (for protection against errors and losses). It has been shown to increase network throughput compared to traditional networks implementation, to reduce delay and to provide robustness to transmission errors and network dynamics. These features are so appealing for multimedia applications that they have spurred a large research effort towards the development of multimedia-specific NC techniques. This paper reviews the recent work in NC for multimedia applications and focuses on the techniques that fill the gap between NC theory and practical applications. It outlines the benefits of NC and presents the open challenges in this area. The paper initially focuses on multimedia-specific aspects of network coding, in particular delay, in-network error control, and mediaspecific error control. These aspects permit to handle varying network conditions as well as client heterogeneity, which are critical to the design and deployment of multimedia systems. After introducing these general concepts, the paper reviews in detail two applications that lend themselves naturally to NC via the cooperation and broadcast models, namely peer-to-peer multimedia streaming and wireless networkin

    Modeling network-controlled device-to-device communications in SimuLTE

    Get PDF
    In Long Term Evolution-Advanced (LTE-A), network-controlled device-to-device (D2D) communications allow User Equipments (UEs) to communicate directly, without involving the Evolved Node-B in data relaying, while the latter still retains control of resource allocation. The above paradigm allows reduced latencies for the UEs and increased resource efficiency for the network operator, and is therefore foreseen to support several services, from Machine-to-machine to vehicular communications. D2D communications introduce research challenges that might affect the performance of applications and upper-layer protocols, hence simulations represent a valuable tool for evaluating these aspects. However, simulating D2D features might pose additional com-putational burden to the simulation environment. To this aim, a careful modeling is required in order to reduce computational overhead. In this paper we describe our modeling of net-work-controlled D2D communications in SimuLTE, a system-level LTE-A simulation library based on OMNeT++. We describe the core modeling choices of SimuLTE, and show how these allow an easy extension to D2D communications. Moreover, we describe in detail the modeling of specific problems arising with D2D communications, such as scheduling with frequency reuse, connection mode switching and broadcast transmission. We document the computational efficiency of our modeling choices, showing that simulation of D2D communications is not more complex than simulation of classical cellular communications of comparable scale. Results show that the heaviest computational burden of D2D communication lies in estimating the Sidelink channel quality. We show that SimuLTE allows one to evaluate the interplay between D2D communication and end-to-end performance of UDP- and TCP-based services. Moreover, we assess the accuracy of using a binary interference model for frequency reuse, and we evaluate the trade-off between speed of execution and accuracy in modeling the reception probability

    Towards video streaming in IoT environments: vehicular communication perspective

    Get PDF
    Multimedia oriented Internet of Things (IoT) enables pervasive and real-time communication of video, audio and image data among devices in an immediate surroundings. Today's vehicles have the capability of supporting real time multimedia acquisition. Vehicles with high illuminating infrared cameras and customized sensors can communicate with other on-road devices using dedicated short-range communication (DSRC) and 5G enabled communication technologies. Real time incidence of both urban and highway vehicular traffic environment can be captured and transmitted using vehicle-to-vehicle and vehicle-to-infrastructure communication modes. Video streaming in vehicular IoT (VSV-IoT) environments is in growing stage with several challenges that need to be addressed ranging from limited resources in IoT devices, intermittent connection in vehicular networks, heterogeneous devices, dynamism and scalability in video encoding, bandwidth underutilization in video delivery, and attaining application-precise quality of service in video streaming. In this context, this paper presents a comprehensive review on video streaming in IoT environments focusing on vehicular communication perspective. Specifically, significance of video streaming in vehicular IoT environments is highlighted focusing on integration of vehicular communication with 5G enabled IoT technologies, and smart city oriented application areas for VSV-IoT. A taxonomy is presented for the classification of related literature on video streaming in vehicular network environments. Following the taxonomy, critical review of literature is performed focusing on major functional model, strengths and weaknesses. Metrics for video streaming in vehicular IoT environments are derived and comparatively analyzed in terms of their usage and evaluation capabilities. Open research challenges in VSV-IoT are identified as future directions of research in the area. The survey would benefit both IoT and vehicle industry practitioners and researchers, in terms of augmenting understanding of vehicular video streaming and its IoT related trends and issues

    Framework for Content Distribution over Wireless LANs

    Get PDF
    Wireless LAN (also called as Wi-Fi) is dominantly considered as the most pervasive technology for Intent access. Due to the low-cost of chipsets and support for high data rates, Wi-Fi has become a universal solution for ever-increasing application space which includes, video streaming, content delivery, emergency communication, vehicular communication and Internet-of-Things (IoT). Wireless LAN technology is defined by the IEEE 802.11 standard. The 802.11 standard has been amended several times over the last two decades, to incorporate the requirement of future applications. The 802.11 based Wi-Fi networks are infrastructure networks in which devices communicate through an access point. However, in 2010, Wi-Fi Alliance has released a specification to standardize direct communication in Wi-Fi networks. The technology is called Wi-Fi Direct. Wi-Fi Direct after 9 years of its release is still used for very basic services (connectivity, file transfer etc.), despite the potential to support a wide range of applications. The reason behind the limited inception of Wi-Fi Direct is some inherent shortcomings that limit its performance in dense networks. These include the issues related to topology design, such as non-optimal group formation, Group Owner selection problem, clustering in dense networks and coping with device mobility in dynamic networks. Furthermore, Wi-Fi networks also face challenges to meet the growing number of Wi Fi users. The next generation of Wi-Fi networks is characterized as ultra-dense networks where the topology changes frequently which directly affects the network performance. The dynamic nature of such networks challenges the operators to design and make optimum planifications. In this dissertation, we propose solutions to the aforementioned problems. We contributed to the existing Wi-Fi Direct technology by enhancing the group formation process. The proposed group formation scheme is backwards-compatible and incorporates role selection based on the device's capabilities to improve network performance. Optimum clustering scheme using mixed integer programming is proposed to design efficient topologies in fixed dense networks, which improves network throughput and reduces packet loss ratio. A novel architecture using Unmanned Aeriel Vehicles (UAVs) in Wi-Fi Direct networks is proposed for dynamic networks. In ultra-dense, highly dynamic topologies, we propose cognitive networks using machine-learning algorithms to predict the network changes ahead of time and self-configuring the network

    Enabling Multipath and Multicast Data Transmission in Legacy and Future Internet

    Get PDF
    The quickly growing community of Internet users is requesting multiple applications and services. At the same time the structure of the network is changing. From the performance point of view, there is a tight interplay between the application and the network design. The network must be constructed to provide an adequate performance of the target application. In this thesis we consider how to improve the quality of users' experience concentrating on two popular and resource-consuming applications: bulk data transfer and real-time video streaming. We share our view on the techniques which enable feasibility and deployability of the network functionality leading to unquestionable performance improvement for the corresponding applications. Modern mobile devices, equipped with several network interfaces, as well as multihomed residential Internet hosts are capable of maintaining multiple simultaneous attachments to the network. We propose to enable simultaneous multipath data transmission in order to increase throughput and speed up such bandwidth-demanding applications as, for example, file download. We design an extension for Host Identity Protocol (mHIP), and propose a multipath data scheduling solution on a wedge layer between IP and transport, which effectively distributes packets from a TCP connection over available paths. We support our protocol with a congestion control scheme and prove its ability to compete in a friendly manner against the legacy network protocols. Moreover, applying game-theoretic analytical modelling we investigate how the multihomed HIP multipath-enabled hosts coexist in the shared network. The number of real-time applications grows quickly. Efficient and reliable transport of multimedia content is a critical issue of today's IP network design. In this thesis we solve scalability issues of the multicast dissemination trees controlled by the hybrid error correction. We propose a scalable multicast architecture for potentially large overlay networks. Our techniques address suboptimality of the adaptive hybrid error correction (AHEC) scheme in the multicast scenarios. A hierarchical multi-stage multicast tree topology is constructed in order to improve the performance of AHEC and guarantee QoS for the multicast clients. We choose an evolutionary networking approach that has the potential to lower the required resources for multimedia applications by utilizing the error-correction domain separation paradigm in combination with selective insertion of the supplementary data from parallel networks, when the corresponding content is available. Clearly both multipath data transmission and multicast content dissemination are the future Internet trends. We study multiple problems related to the deployment of these methods.Internetin nopeasti kasvava käyttäjäkunta vaatii verkolta yhä enemmän sovelluksia ja palveluita. Samaan aikaan verkon rakenne muuttuu. Suorituskyvyn näkökulmasta on olemassa selvä vuorovaikutussovellusten ja verkon suunnittelun välillä. Verkko on rakennettava siten, että se pystyy takaamaan riittävän suorituskyvyn halutuille palveluille. Tässä väitöskirjassa pohditaan, miten verkon käyttökokemusta voidaan parantaa keskittyen kahteen suosittuun ja resursseja vaativaan sovellukseen: tiedonsiirtoon ja reaaliaikaiseen videon suoratoistoon. Esitämme näkemyksemme tekniikoista, jotka mahdollistavat tarvittavien verkkotoiminnallisuuksien helpon toteuttavuuden sekä kiistatta parantavat sovelluksien suorityskykyä. Nykyaikaiset mobiililaitteet monine verkkoyhteyksineen, kuten myös kotitietokoneet, pystyvät ylläpitämään monta internet-yhteyttä samanaikaisesti. Siksi ehdotamme monikanavaisen tiedonsiirron käyttöä suorituskyvyn parantamiseksi ja etenkin vaativien verkkosovelluksien, kuten tiedostonsiirron, nopeuttamiseksi. Tässä väitöskirjassa suunnitellaan Host Identity Protocol (mHIP) -laajennus, sekä esitetään tiedonsiirron vuorotteluratkaisu, joka hajauttaa TCP-yhteyden tiedonsiirtopaketit käytettävissä oleville kanaville. Protokollamme tueksi luomme myös ruuhkautumishallinta-algoritmin ja näytämme sen pystyvän toimimaan yhteen nykyisien verkkoprotokollien kanssa. Tämän lisäksi tutkimme peliteoreettista mallinnusta käyttäen, miten monikanavaiset HIP-verkkopäätteet toimivat muiden kanssa jaetuissa verkoissa. Reaaliaikaisten sovellusten määrä kasvaa nopeasti. Tehokas ja luotettava multimediasisällön siirto on olennainen vaatimus nykypäivän IP-verkoissa. Tässä työssä ratkaistaan monilähetyksen (multicast) jakelustruktuurin skaalautuvuuteen liittyviä ongelmia. Ehdotamme skaalautuvaa monilähetysarkkitehtuuria suurille peiteverkoille. Ratkaisumme puuttuu adaptiivisen virhekorjauksen (Adaptive Hybrid Error Correction, AHEC) alioptimaalisuuteen monilähetystilanteissa. Luomme hierarkisen monivaiheisen monilähetyspuutopologian parantaaksemme AHECin suorituskykyä, sekä taataksemme monilähetysasiakkaiden palvelun laadun. Valitsimme evoluutiomaisen lähestymistavan, jolla on potentiaalia keventää multimediasovelluksien verkkoresurssivaatimuksia erottamalla virhekorjauksen omaksi verkkotunnuksekseen, sekä käyttämällä valikoivaa täydentävää tiedonlisäystä rinnakkaisverkoista vastaavan sisällön ollessa saatavilla. Sekä monikanava- että monilähetystiedonsiirto ovat selvästi osa internetin kehityssuuntaa. Tässä väitöskirjassa tutkimme monia ongelmia näiden tekniikoiden käyttöönottoon liittyen
    corecore