A Middleware for the Internet of Things

The Internet of Things (IoT) connects everyday objects including a vast array of sensors, actuators, and smart devices, referred to as things to the Internet, in an intelligent and pervasive fashion. This connectivity gives rise to the possibility of using the tracking capabilities of things to impinge on the location privacy of users. Most of the existing management and location privacy protection solutions do not consider the low-cost and low-power requirements of things, or, they do not account for the heterogeneity, scalability, or autonomy of communications supported in the IoT. Moreover, these traditional solutions do not consider the case where a user wishes to control the granularity of the disclosed information based on the context of their use (e.g. based on the time or the current location of the user). To fill this gap, a middleware, referred to as the Internet of Things Management Platform (IoT-MP) is proposed in this paper.Comment: 20 pages, International Journal of Computer Networks & Communications (IJCNC) Vol.8, No.2, March 201

Service-oriented wireless sensor networks and an energy-aware mesh routing algorithm

Service-oriented wireless sensor networks (WSNs) are being paid more and more attention because service computing can hide complexity of WSNs and enables simple and transparent access to individual sensor nodes. Existing WSNs mainly use IEEE 802.15.4 as their communication specification, however, this protocol suite cannot support IP-based routing and service-oriented access because it only specifies a set of physical- and MAC-layer protocols. For inosculating WSNs with IP networks, IEEE proposed a 6LoWPAN (IPv6 over LoW Power wireless Area Networks) as the adaptation layer between IP and MAC layers. However, it is still a challenging task how to discover and manage sensor resources, guarantee the security of WSNs and route messages over resource-restricted sensor nodes. This paper is set to address such three key issues. Firstly, we propose a service-oriented WSN architectural model based on 6LoWPAN and design a lightweight service middleware SOWAM (service-oriented WSN architecture middleware), where each sensor node provides a collection of services and is managed by our SOWAM. Secondly, we develop a security mechanism for the authentication and secure connection among users and sensor nodes. Finally, we propose an energyaware mesh routing protocol (EAMR) for message transmission in a WSN with multiple mobile sinks, aiming at prolonging the lifetime of WSNs as long as possible. In our EAMR, sensor nodes with the residual energy lower than a threshold do not forward messages for other nodes until the threshold is leveled down. As a result, the energy consumption is evened over sensor nodes significantly. The experimental results demonstrate the feasibility of our service-oriented approach and lightweight middleware SOWAM, as well as the effectiveness of our routing algorithm EAMR.<br /

A mobile code bundle extension for application-defined routing in delay and disruption tolerant networking

Grup de recerca SENDA (Security of Network and Distributed Applications)In this paper, we introduce software code to improve Delay and Disruption Tolerant Networking (DTN) performance. DTN is extremely useful when source and destination nodes are intermittently connected. DTN implementations use application-specific routing algorithms to overcome those limitations. However, current implementations do not support the concurrent execution of several routing algorithms. In this paper, we contribute to this issue providing a solution that consists on extending the messages being communicated by incorporating software code for forwarding, lifetime control and prioritisation purposes. Our proposal stems from the idea of moving the routing algorithms from the host to the message. This solution is compatible with Bundle Protocol (BP) and facilitates the deployment of applications with new routing needs. A real case study based on an emergency scenario is presented to provide details of a real implementation. Several simulations are presented to prove the feasibility and usability of the system and to analyse its performance in comparison to state-of-the-art approaches

New Protocol and Architecture for a Wastewater Treatment System Intended for Irrigation

[EN] Water quality may be affected by aspects such as pollution from industries, agricultural fertilizers and pesticides, and waste produced by humans. This contamination can affect the produce of the fields irrigated by untreated water. Therefore, it is necessary to add a treatment process in irrigation systems. In this paper, an architecture, communication protocol, and a data analysis algorithm for a wastewater treatment system intended for irrigation are presented. Our system includes a smart group-based wireless sensor network that is able to detect high salinity levels and pollution stains, such as oil spills. When contamination is detected, the water is led into auxiliary canals that perform the biosorption process to treat the water and dump it back into the main canal. Simulations were performed to assess the amount of data stored on the secure digital (SD) card, the consumed bandwidth, and the energy consumption of our proposal. The results show the system has a low bandwidth consumption with a maximum of 2.58 kbps for the setting of two daily data transmissions of the node in the last auxiliary canal. Furthermore, it can sustain the energy consumption in adverse conditions, where the node with the highest energy consumption reaches the lowest energy value of 12,320 mW/h.This research was partially funded by the European Union through the ERANETMED (Euromediterranean Cooperation through ERANET joint activities and beyond) project ERANETMED3-227 SMARTWATIR. This work has also been partially funded by the Universitat Politecnica de Valencia through the post-doctoral PAID-10-20 program and by Conselleria de Educacion, Cultura y Deporte with the Subvenciones para la contratacion de personal investigador en fase postdoctoral, grant number APOSTD/2019/04.Jimenez, JM.; Parra-Boronat, L.; García, L.; Lloret, J.; Mauri, PV.; Lorenz, P. (2021). New Protocol and Architecture for a Wastewater Treatment System Intended for Irrigation. Applied Sciences. 11(8):1-21. https://doi.org/10.3390/app11083648S12111

Validation platform implementation description – D5.2

Deliverable D5.2 del projecte OneFITPostprint (published version

Network and service monitoring in heterogeneous home networks

Home networks are becoming dynamic and technologically heterogeneous. They consist of an increasing number of devices which offer several functionalities and can be used for many different services. In the home, these devices are interconnected using a mixture of networking technologies (for example, Ethernet, Wifi, coaxial cable, or power-line). However, interconnecting these devices is often not easy. The increasing heterogeneity has led to significant device- and service-management complexity. In addition, home networks provide a critical "last meters" access to the public telecom and Internet infrastructure and have a dramatic impact on to the end-to-end reliability and performance of services from these networks. This challenges service providers not only to maintain a satisfactory quality of service level in such heterogeneous home networks, but also to remotely monitor and troubleshoot them. The present thesis work contributes research and several solutions in the field of network and service monitoring in home networks, mainly in three areas: (1) providing automatic device- and service-discovery and configuration, (2) remote management, and (3) providing quality of service (QoS). With regard to the first area, current service discovery technology is designed to relieve the increasing human role in network and service administration. However, the relevant Service Discovery Protocols (SDPs) are lacking crucial features namely: (1) they are not platform- and network-independent, and (2) they do not provide sufficient mechanisms for (device) resource reservation. Consequently, devices implementing different SDPs cannot communicate with each other and share their functionalities and resources in a managed way, especially when they use different network technologies. As a solution to the first problem, we propose a new proxy server architecture that enables IP-based devices and services to be discovered on non-IP based network and vice versa. We implemented the proxy architecture using UPnP respectively Bluetooth SDP as IP- and non-IP-based SDPs. The proxy allows Bluetooth devices and UPnP control points to discover, access, and utilize services located on the other network. Validation experiments with the proxy prototype showed that seamless inter-working can be achieved keeping all proxy functionalities on a single device, thus not requiring modification of currently existing UPnP and Bluetooth end devices. Although the proxy itself taxes the end-to-end performance of the service, it is shown to be still acceptable for an end user. For mitigating resource conflicts in SDPs, we propose a generic resource reservation scheme with properties derived from common SDP operation. Performance studies with a prototype showed that this reservation scheme significantly improves the scalability and sustainability of service access in SDPs, at a minor computational cost. With regard to the second area, it is known that the end-to-end quality of Internet services depends crucially on the performance of the home network. Consequently, service providers require the ability to monitor and configure devices in the home network, behind the home gateway (HG). However, they can only put limited requirements to these off-the-shelf devices, as the consumer electronics market is largely outside their span of control. Therefore they have to make intelligent use of the given device control and management protocols. In this work, we propose an architecture for remote discovery and management of devices in a highly heterogeneous home network. A proof-of-concept is developed for the remote management of UPnP devices in the home with a TR-069/UPnP proxy on the HG. Although this architecture is protocol specific, it can be easily adapted to other web-services based protocols. Service providers are also asking for diagnostic tools with which they can remotely troubleshoot the home networks. One of these tools should be able to gather information about the topology of the home network. Although topology discovery protocols already exist, nothing is known yet about their performance. In this work we propose a set of key performance indicators for home network topology discovery architectures, and how they should be measured. We applied them to the Link-Layer Topology Discovery (LLTD) protocol and the Link-Layer Discovery Protocol (LLDP). Our performance measurement results show that these protocols do not fulfill all the requirements as formulated by the service providers. With regard to the third area, current QoS solutions are mostly based on traffic classification. Because they need to be supported by all devices in the network, they are relatively expensive for home networks. Furthermore, they are not interoperable between different networking technologies. Alternative QoS provision techniques have been proposed in the literature. These techniques require end-user services to pragmatically adapt their properties to the actual condition of the network. For this, the condition of the home network in terms of its available bandwidth, delay, jitter, etc., needs to be known in real time. Appropriate tools for determining the available home network resources do not yet exist. In this work we propose a new method to probe the path capacity and available bandwidth between a server and a client in a home network. The main features of this method are: (a) it does not require adaptation of existing end devices, (b) it does not require pre-knowledge of the link-layer network topology, and (c) it is accurate enough to make reliable QoS predictions for the most relevant home applications. To use these predictions for effective service- or content-adaptation or admission control, one should also know how the state of the home network is expected to change immediately after the current state has been probed. However, not much is known about the stochastic properties of traffic in home networks. Based on a relatively small set of traffic observations in several home networks in the Netherlands, we were able to build a preliminary model for home network traffic dynamics

A heterogeneous network management approach to wireless sensor networks in personal healthcare environments

University of Technology, Sydney. Faculty of Science.Many countries are facing problems caused by a rapid surge in numbers of people over sixty-five. This aging population cohort will place a strain on the existing health systems because the elderly are prone to falls, chronic illnesses, dementia and general frailty. At the same time governments are struggling to attract more people into the health systems and there are already shortages of qualified nurses and care givers. This thesis represents a multi disciplinary approach to trying to solve some of the above issues. In the first instance the researcher has established the validity of the health crisis and then examined ways in which Information Technology could help to alleviate some of the issues. The nascent technology called Wireless Sensor Networks was examined as a way of providing remote health monitoring for the elderly, the infirm and the ill. The researcher postulated that Network Management models and tools that are used to monitor huge networks of computers could be adapted to monitor the health of persons in their own homes, in aged care facilities and hospitals. Wireless Sensor Network (WNS) Personal Healthcare can monitor such vital signs as a patient’s temperature, heart rate and blood oxygen level. WSNs (often referred to as Motes) use wireless transceivers that can do remote sensing. The researcher aimed to assist all stakeholders in the personal healthcare arena to use WSNs to improve monitoring. The researcher provided a solution architecture and framework for healthcare sensor monitoring systems, based on network management techniques. This architecture generalises to heterogeneous and autonomous data acquisition systems. Future directions from this research point towards new areas of knowledge from the development or creation of new technologies to support the exponential growth of ubiquitous, just-in-time WSN health informational services and applications such as the preventive and proactive personal care health management and services around it. The affordable and ubiquitous distributed access to remote personal health care technologies in the future could have an important impact in the society, by allowing the individuals to take immediate preventive actions over their overall health condition. These systems could potentially prevent death as well as improve national health budgets by limiting costly medical interventions that could have been avoided by individual, easy-action early prevention

Requirements for digitized aircraft spotting (Ouija) board for use on U.S. Navy aircraft carriers

This thesis will evaluate system and process elements to initiate requirements modeling necessary for the next generation Digitized Aircraft Spotting (Ouija) Board for use on U.S. Navy aircraft carriers to track and plan aircraft movement. The research will examine and evaluate the feasibility and suitability of transforming the existing two-dimensional static board to an electronic, dynamic display that will enhance situational awareness by using sensors and system information from various sources to display a comprehensive operational picture of the current flight and hangar decks aboard aircraft carriers. The authors will evaluate the current processes and make recommendations on elements the new system would display. These elements include what information is displayed, which external systems feed information to the display, and how intelligent agents could be used to transform the static display to a powerful decision support tool. Optimally, the Aircraft Handler will use this system to effectively manage the Flight and Hangar decks to support the projection of air power from U.S. aircraft carriers.http://archive.org/details/requirementsford109454447Lieutenant Commander, United States NavyLieutenant Commander, United States Navy ReserveApproved for public release; distribution is unlimited

Protocols, performance assessment and consolidation on interfaces for standardization – D3.3

The following document presents a detailed description of the protocol for the “ Control Channels for the Cooperation of the Cognitive Management System ” (C4MS) which provides the necessary means to enable proper management of Opportunistic Networks. Additionally, the document defines the methodology that was applied for the purpose of signalling evaluation. The protocol overview presented in section 2 of the main document, provides the C4MS principles. The section includes, among others, the description of the protocol identifiers, procedures, protocol state machines and message format as well as the security asp ects. Section 3 provides a high-level description of the data structures defined within the scope of OneFIT project. The data structures are classified into five categories, i.e.: Profiles, Context, Decisions,Knowledge and Policies. The high level description is complemented by some detailed data structures in the Appendix to D3.3 Section 3[10]. Section 4 provides details on the evaluation methodology applied for the purpose of C4MS performance assessment. The section presents the evaluation plan along with a description of metrics that are to be exploited in the scope of WP3. Section 5 and Section 6 are composed of the signalling evaluation results. Section 5 focuses on the estimation of the signalling load imposed by ON management in different ON phases. Additionally some results for the initialization phase (not explicitly mentioned in the previous phases of the project)and security related aspects are also depicted. Section 6 on the other hand is focused on the evaluation of the signalling traffic generated by different ON related algorithms. Conclusions to the document are drawn in section 7. Detailed description of the C4MS procedures, implementation options based on IEEE 802.21, DIAMTER and 3GPP are depicted in the appendix to the D3.3[10] . Additionally, the appendix incorporates the detailed definition of the information data structures and final set of Message Sequence Charts (MSCs) provided for the OneFIT project.Peer ReviewedPreprin