Development and characterization of a wire-plate air bubbling plasma for wastewater treatment using nanosecond pulsed high voltage

This study developed a prototype of a wire-plate air bubbling plasma reactor that can be easily scaled up for wastewater treatment. The electrical characteristics, including the discharge current and average power consumed, of the developed reactor were deeply investigated at different operating parameters and solution conductivities. The performance of the reactor was examined on the basis of energy efficiency and methylene blue (MB) decoloration efficiency. Moreover, the removal of the total organic carbon and the changes of the physicochemical properties of solution, including pH, conductivity, and temperature, were evaluated. The analysis of current discharge and average power consumed showed that the discharge mode in the present reactor is a filamentary streamer. Interestingly, the solution conductivity had no effect on the average power consumed at low applied voltages, due to confinement of the discharge in a small area surrounding the discharge electrode in the gas phase. However, at relatively high voltages, the effect of conductivity on the average power consumed was noticeable, yet it had no effect on the decoloration efficiency at the same average power. The present reactor showed a high energy-efficiency value of 42 g/kWh at 50% decoloration of 30 mg/l MB solution, but it dropped to 14 g/kWh at 97% decoloration. A first-order kinetics model described well the decoloration reaction rates and the overall rate constant correlated linearly to the average power

Effect of water on electrical properties of Refined, Bleached, and Deodorized Palm Oil (RBDPO) as electrical insulating material

This paper describes the properties of refined, bleached, deodorized palm oil (RBDPO) as having the potential to be used as insulating liquid. There are several important properties such as electrical breakdown, dielectric dissipation factor, specific gravity, flash point, viscosity and pour point of RBDPO that was measured and compared to commercial mineral oil which is largely in current use as insulating liquid in power transformers. Experimental results of the electrical properties revealed that the average breakdown voltage of the RBDPO sample, without the addition of water at room temperature, is 13.368 kV. The result also revealed that due to effect of water, the breakdown voltage is lower than that of commercial mineral oil (Hyrax). However, the flash point and the pour point of RBDPO is very high compared to mineral oil thus giving it advantageous possibility to be used safely as insulating liquid. The results showed that RBDPO is greatly influenced by water, causing the breakdown voltage to decrease and the dissipation factor to increase; this is attributable to the high amounts of dissolved water