217 research outputs found
Coordinated Multicast Beamforming in Multicell Networks
We study physical layer multicasting in multicell networks where each base
station, equipped with multiple antennas, transmits a common message using a
single beamformer to multiple users in the same cell. We investigate two
coordinated beamforming designs: the quality-of-service (QoS) beamforming and
the max-min SINR (signal-to-interference-plus-noise ratio) beamforming. The
goal of the QoS beamforming is to minimize the total power consumption while
guaranteeing that received SINR at each user is above a predetermined
threshold. We present a necessary condition for the optimization problem to be
feasible. Then, based on the decomposition theory, we propose a novel
decentralized algorithm to implement the coordinated beamforming with limited
information sharing among different base stations. The algorithm is guaranteed
to converge and in most cases it converges to the optimal solution. The max-min
SINR (MMS) beamforming is to maximize the minimum received SINR among all users
under per-base station power constraints. We show that the MMS problem and a
weighted peak-power minimization (WPPM) problem are inverse problems. Based on
this inversion relationship, we then propose an efficient algorithm to solve
the MMS problem in an approximate manner. Simulation results demonstrate
significant advantages of the proposed multicast beamforming algorithms over
conventional multicasting schemes.Comment: 10pages, 9 figure
Energy Efficient Coordinated Beamforming for Multi-cell MISO Systems
In this paper, we investigate the optimal energy efficient coordinated
beamforming in multi-cell multiple-input single-output (MISO) systems with
multiple-antenna base stations (BS) and single-antenna mobile stations
(MS), where each BS sends information to its own intended MS with cooperatively
designed transmit beamforming. We assume single user detection at the MS by
treating the interference as noise. By taking into account a realistic power
model at the BS, we characterize the Pareto boundary of the achievable energy
efficiency (EE) region of the links, where the EE of each link is defined
as the achievable data rate at the MS divided by the total power consumption at
the BS. Since the EE of each link is non-cancave (which is a non-concave
function over an affine function), characterizing this boundary is difficult.
To meet this challenge, we relate this multi-cell MISO system to cognitive
radio (CR) MISO channels by applying the concept of interference temperature
(IT), and accordingly transform the EE boundary characterization problem into a
set of fractional concave programming problems. Then, we apply the fractional
concave programming technique to solve these fractional concave problems, and
correspondingly give a parametrization for the EE boundary in terms of IT
levels. Based on this characterization, we further present a decentralized
algorithm to implement the multi-cell coordinated beamforming, which is shown
by simulations to achieve the EE Pareto boundary.Comment: 6 pages, 2 figures, to be presented in IEEE GLOBECOM 201
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Joint Beamforming and Power Control in Coordinated Multicell: Max-Min Duality, Effective Network and Large System Transition
This paper studies joint beamforming and power control in a coordinated
multicell downlink system that serves multiple users per cell to maximize the
minimum weighted signal-to-interference-plus-noise ratio. The optimal solution
and distributed algorithm with geometrically fast convergence rate are derived
by employing the nonlinear Perron-Frobenius theory and the multicell network
duality. The iterative algorithm, though operating in a distributed manner,
still requires instantaneous power update within the coordinated cluster
through the backhaul. The backhaul information exchange and message passing may
become prohibitive with increasing number of transmit antennas and increasing
number of users. In order to derive asymptotically optimal solution, random
matrix theory is leveraged to design a distributed algorithm that only requires
statistical information. The advantage of our approach is that there is no
instantaneous power update through backhaul. Moreover, by using nonlinear
Perron-Frobenius theory and random matrix theory, an effective primal network
and an effective dual network are proposed to characterize and interpret the
asymptotic solution.Comment: Some typos in the version publised in the IEEE Transactions on
Wireless Communications are correcte
An Overview of Massive MIMO Technology Components in METIS
As the standardization of full-dimension MIMO systems in the Third Generation Partnership Project progresses, the research community has started to explore the potential of very large arrays as an enabler technology for meeting the requirements of fifth generation systems. Indeed, in its final deliverable, the European 5G project METIS identifies massive MIMO as a key 5G enabler and proposes specific technology components that will allow the cost-efficient deployment of cellular systems taking advantage of hundreds of antennas at cellular base stations. These technology components include handling the inherent pilot-data resource allocation trade-off in a near optimal fashion, a novel random access scheme supporting a large number of users, coded channel state information for sparse channels in frequency-division duplexing systems, managing user grouping and multi-user beamforming, and a decentralized coordinated transceiver design. The aggregate effect of these components enables massive MIMO to contribute to the METIS objectives of delivering very high data rates and managing dense populations
Energy-Efficient Coordinated Multi-Cell Multigroup Multicast Beamforming with Antenna Selection
This paper studies energy-efficient coordinated beamforming in multi-cell
multi-user multigroup multicast multiple-input single-output systems. We aim at
maximizing the network energy efficiency by taking into account the fact that
some of the radio frequency chains can be switched off in order to save power.
We consider the antenna specific maximum power constraints to avoid non-linear
distortion in power amplifiers and user-specific quality of service (QoS)
constraints to guarantee a certain QoS levels. We first introduce binary
antenna selection variables and use the perspective formulation to model the
relation between them and the beamformers. Subsequently, we propose a new
formulation which reduces the feasible set of the continuous relaxation,
resulting in better performance compared to the original perspective
formulation based problem. However, the resulting optimization problem is a
mixed-Boolean non-convex fractional program, which is difficult to solve. We
follow the standard continuous relaxation of the binary antenna selection
variables, and then reformulate the problem such that it is amendable to
successive convex approximation. Thereby, solving the continuous relaxation
mostly results in near-binary solution. To recover the binary variables from
the continuous relaxation, we switch off all the antennas for which the
continuous values are smaller than a small threshold. Numerical results
illustrate the superior convergence result and significant achievable gains in
terms of energy efficiency with the proposed algorithm.Comment: 6 pages, 5 figures, accepted to IEEE ICC 2017 - International
Workshop on 5G RAN Desig
- …