11,218 research outputs found
Reliable data delivery in low energy ad hoc sensor networks
Reliable delivery of data is a classical design goal for reliability-oriented collection routing protocols for ad hoc wireless sensor networks (WSNs). Guaranteed packet delivery performance can be ensured by careful selection of error free links, quick recovery from packet losses, and avoidance of overloaded relay sensor nodes. Due to limited resources of individual senor nodes, there is usually a trade-off between energy spending for packets transmissions and the appropriate level of reliability. Since link failures and packet losses are unavoidable, sensor networks may tolerate a certain level of reliability without significantly affecting packets delivery performance and data aggregation accuracy in favor of efficient energy consumption. However a certain degree of reliability is needed, especially when hop count increases between source sensor nodes and the base station as a single lost packet may result in loss of a large amount of aggregated data along longer hops. An effective solution is to jointly make a trade-off between energy, reliability, cost, and agility while improving packet delivery, maintaining low packet error ratio, minimizing unnecessary packets transmissions, and adaptively reducing control traffic in favor of high success reception ratios of representative data packets. Based on this approach, the proposed routing protocol can achieve moderate energy consumption and high packet delivery ratio even with high link failure rates. The proposed routing protocol was experimentally investigated on a testbed of Crossbow's TelosB motes and proven to be more robust and energy efficient than the current implementation of TinyOS2.x MultihopLQI
Traffic eavesdropping based scheme to deliver time-sensitive data in sensor networks
Due to the broadcast nature of wireless channels, neighbouring sensor nodes may overhear packets transmissions from each other even if they are not the intended recipients of these transmissions. This redundant packet reception leads to unnecessary expenditure of battery energy of the recipients. Particularly in highly dense sensor networks, overhearing or eavesdropping overheads can constitute a significant fraction of the total energy consumption. Since overhearing of wireless traffic is unavoidable and sometimes essential, a new distributed energy efficient scheme is proposed in this paper. This new scheme exploits the inevitable overhearing effect as an effective approach in order to collect the required information to perform energy efficient delivery for data aggregation. Based on this approach, the proposed scheme achieves moderate energy consumption and high packet delivery rate notwithstanding the occurrence of high link failure rates. The performance of the proposed scheme is experimentally investigated a testbed of TelosB motes in addition to ns-2 simulations to validate the performed experiments on large-scale network
Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks
This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for
Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN
applications having different types of data traffic with several priorities.
The protocol achieves to increase Packet Reception Ratio (PRR) and reduce
end-to-end delay while considering multi-queue priority policy, two-hop
neighborhood information, link reliability and power efficiency. The protocol
is modular and utilizes effective methods for estimating the link metrics.
Numerical results show that the proposed protocol is a feasible solution to
addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page
A Review of the Energy Efficient and Secure Multicast Routing Protocols for Mobile Ad hoc Networks
This paper presents a thorough survey of recent work addressing energy
efficient multicast routing protocols and secure multicast routing protocols in
Mobile Ad hoc Networks (MANETs). There are so many issues and solutions which
witness the need of energy management and security in ad hoc wireless networks.
The objective of a multicast routing protocol for MANETs is to support the
propagation of data from a sender to all the receivers of a multicast group
while trying to use the available bandwidth efficiently in the presence of
frequent topology changes. Multicasting can improve the efficiency of the
wireless link when sending multiple copies of messages by exploiting the
inherent broadcast property of wireless transmission. Secure multicast routing
plays a significant role in MANETs. However, offering energy efficient and
secure multicast routing is a difficult and challenging task. In recent years,
various multicast routing protocols have been proposed for MANETs. These
protocols have distinguishing features and use different mechanismsComment: 15 page
RTXP : A Localized Real-Time Mac-Routing Protocol for Wireless Sensor Networks
Protocols developed during the last years for Wireless Sensor Networks (WSNs)
are mainly focused on energy efficiency and autonomous mechanisms (e.g.
self-organization, self-configuration, etc). Nevertheless, with new WSN
applications, appear new QoS requirements such as time constraints. Real-time
applications require the packets to be delivered before a known time bound
which depends on the application requirements. We particularly focus on
applications which consist in alarms sent to the sink node. We propose
Real-Time X-layer Protocol (RTXP), a real-time communication protocol. To the
best of our knowledge, RTXP is the first MAC and routing real-time
communication protocol that is not centralized, but instead relies only on
local information. The solution is cross-layer (X-layer) because it allows to
control the delays due to MAC and Routing layers interactions. RTXP uses a
suited hop-count-based Virtual Coordinate System which allows deterministic
medium access and forwarder selection. In this paper we describe the protocol
mechanisms. We give theoretical bound on the end-to-end delay and the capacity
of the protocol. Intensive simulation results confirm the theoretical
predictions and allow to compare with a real-time centralized solution. RTXP is
also simulated under harsh radio channel, in this case the radio link
introduces probabilistic behavior. Nevertheless, we show that RTXP it performs
better than a non-deterministic solution. It thus advocates for the usefulness
of designing real-time (deterministic) protocols even for highly unreliable
networks such as WSNs
M-ATTEMPT: A New Energy-Efficient Routing Protocol for Wireless Body Area Sensor Networks
In this paper, we propose a new routing protocol for heterogeneous Wireless
Body Area Sensor Networks (WBASNs); Mobility-supporting Adaptive
Threshold-based Thermal-aware Energy-efficientMulti-hop ProTocol (M-ATTEMPT). A
prototype is defined for employing heterogeneous sensors on human body. Direct
communication is used for real-time traffic (critical data) or on-demand data
while Multi-hop communication is used for normal data delivery. One of the
prime challenges in WBASNs is sensing of the heat generated by the implanted
sensor nodes. The proposed routing algorithm is thermal-aware which senses the
link Hot-spot and routes the data away from these links. Continuous mobility of
human body causes disconnection between previous established links. So,
mobility support and energy-management is introduced to overcome the problem.
Linear Programming (LP) model for maximum information extraction and minimum
energy consumption is presented in this study. MATLAB simulations of proposed
routing algorithm are performed for lifetime and successful packet delivery in
comparison with Multi-hop communication. The results show that the proposed
routing algorithm has less energy consumption and more reliable as compared to
Multi-hop communication.Comment: arXiv admin note: substantial text overlap with arXiv:1208.609
- …