Comparison of five assays for DNA extraction from bacterial cells in human faecal samples

Aim To determine the most effective DNA extraction method for bacteria in faecal samples. Materials and Results This study assessed five commercial methods, that is, NucliSens easyMag, QIAamp DNA Stool Mini kit, PureLink Microbiome DNA purification kit, QIAamp PowerFecal DNA kit and RNeasy PowerMicrobiome kit, of which the latter has been optimized for DNA extraction. The DNA quantity and quality were determined using Nanodrop, Qubit and qPCR. The PowerMicrobiome kit recovered the highest DNA concentration, whereby this kit also recovered the highest gene copy number of Gram positives, Gram negatives and total bacteria. Furthermore, the PowerMicrobiome kit in combination with mechanical pre-treatment (bead beating) and with combined enzymatic and mechanical pre-treatment (proteinase K+mutanolysin+bead beating) was more effective than without pre-treatment. Conclusion From the five DNA extraction methods that were compared, the PowerMicrobiome kit, preceded by bead beating, which is standard included, was found to be the most effective DNA extraction method for bacteria in faecal samples. Significance and Impact of the Study The quantity and quality of DNA extracted from human faecal samples is a first important step to optimize molecular methods. Here we have shown that the PowerMicrobiome kit is an effective DNA extraction method for bacterial cells in faecal samples for downstream qPCR purpose

Combined DNA extraction and antibody elution from filter papers for the assessment of malaria transmission intensity in epidemiological studies.

BACKGROUND: Informing and evaluating malaria control efforts relies on knowledge of local transmission dynamics. Serological and molecular tools have demonstrated great sensitivity to quantify transmission intensity in low endemic settings where the sensitivity of traditional methods is limited. Filter paper blood spots are commonly used a source of both DNA and antibodies. To enhance the operational practicability of malaria surveys, a method is presented for combined DNA extraction and antibody elution. METHODS: Filter paper blood spots were collected as part of a large cross-sectional survey in the Kenyan highlands. DNA was extracted using a saponin/chelex method. The eluate of the first wash during the DNA extraction process was used for antibody detection and compared with previously validated antibody elution procedures. Antibody elution efficiency was assessed by total IgG ELISA for malaria antigens apical membrane antigen-1 (AMA-1) and merozoite-surface protein-1 (MSP-142). The sensitivity of nested 18S rRNA and cytochrome b PCR assays and the impact of doubling filter paper material for PCR sensitivity were determined. The distribution of cell material and antibodies throughout filter paper blood spots were examined using luminescent and fluorescent reporter assays. RESULTS: Antibody levels measured after the combined antibody/DNA extraction technique were strongly correlated to those measured after standard antibody elution (p < 0.0001). Antibody levels for both AMA-1 and MSP-142 were generally slightly lower (11.3-21.4%) but age-seroprevalence patterns were indistinguishable. The proportion of parasite positive samples ranged from 12.9% to 19.2% in the different PCR assays. Despite strong agreement between outcomes of different PCR assays, none of the assays detected all parasite-positive individuals. For all assays doubling filter paper material for DNA extraction increased sensitivity. The concentration of cell and antibody material was not homogenously distributed throughout blood spots. CONCLUSION: Combined DNA extraction and antibody elution is an operationally attractive approach for high throughput assessment of cumulative malaria exposure and current infection prevalence in endemic settings. Estimates of antibody prevalence are unaffected by the combined extraction and elution procedure. The choice of target gene and the amount and source of filter paper material for DNA extraction can have a marked impact on PCR sensitivity

DNA extraction from museum specimens of parasitic Hymenoptera.

At the same time that molecular researchers are improving techniques to extract DNA from museum specimens, this increased demand for access to museum specimens has created tension between the need to preserve specimens for maintaining collections and morphological research and the desire to conduct molecular analyses. To address these concerns, we examined the suitability of non-invasive DNA extraction techniques on three species of parasitic Hymenoptera (Braconidae), and test the effects of body size (parasitoid species), age (time since collection), and DNA concentration from each extract on the probability of amplifying meaningful fragments of two commonly used genetic loci. We found that age was a significant factor for determining the probability of success for sequencing both 28S and COI fragments. While the size of the braconid parasitoids significantly affected the total amount of extracted DNA, neither size nor DNA concentration were significant factors for the amplification of either gene region. We also tested several primer combinations of various lengths, but were unable to amplify fragments longer than ~150 base pairs. These short fragments of 28S and COI were however sufficient for species identification, and for the discovery of within species genetic variation

An efficient method for DNA extraction from Cladosporioid fungi

We developed an efficient method for DNA extraction from Cladosporioid fungi, which are important fungal plant pathogens. The cell wall of Cladosporioid fungi is often melanized, which makes it difficult to extract DNA from their cells. In order to overcome this we grew these fungi for three days on agar plates and extracted DNA from mycelium mats after manual or electric homogenization. High-quality DNA was isolated, with an A260/A280 ratio ranging between 1.6 and 2.0. Isolated genomic DNA was efficiently digested with restriction enzymes and produced distinct banding patterns on agarose gels for the different Cladosporium species. Clear DNA fragments from the isolated DNA were amplified by PCR using small and large subunit rDNA primers, demonstrating that this method provides DNA of sufficiently high quality for molecular analyse

Ceramic materials lead to underestimated DNA quantifications : a method for reliable measurements

In the context of investigating cell-material interactions or of material-guided generation of tissues, DNA quantification represents an elective method to precisely assess the number of cells attached or embedded within different substrates. Nonetheless, nucleic acids are known to electrostatically bind to ceramics, a class of materials commonly employed in orthopaedic implants and bone tissue engineering scaffolds. This phenomenon is expected to lead to a relevant underestimation of the DNA amount, resulting in erroneous experimental readouts. The present work aims at *lpar;i) investigating the effects of DNA-ceramic bond occurrence on DNA quantification, and (ii) developing a method to reliably extract and accurately quantify DNA in ceramic-containing specimens. A cell-free model was adopted to study DNA-ceramic binding, highlighting an evident DNA loss (up to 90%) over a wide range of DNA/ceramic ratios (w/w). A phosphate buffer-based (800 mM) enzymatic extraction protocol was developed and its efficacy in terms of reliable DNA extraction and measurement was confirmed with commonly used fluorometric assays, for various ceramic substrates. The proposed buffered DNA extraction technique was validated in a cell-based experiment showing 95% DNA retrieval in a cell seeding experiment, demonstrating a 3.5-fold increase in measured DNA amount as compared to a conventional enzymatic extraction protocol. In conclusion, the proposed phosphate buffer method consistently improves the DNA extraction process assuring unbiased analysis of samples and allowing accurate and sensitive cell number quantification on ceramic containing substrates

Comparison of four DNA extraction and three preservation protocols for the molecular detection and quantification of soil-transmitted helminths in stool

Background : A DNA extraction and preservation protocol that yields sufficient and qualitative DNA is pivotal for the success of any nucleic acid amplification test (NAAT), but it still poses a challenge for soil-transmitted helminths (STHs), including Ascaris lumbricoides, Trichuris trichiura and the two hookworms (Necator americanus and Ancylostoma duodenale). In the present study, we assessed the impact of different DNA extraction and preservativation protocols on STH-specific DNA amplification from stool. Methodology and principal findings : In a first experiment, DNA was extracted from 37 stool samples with variable egg counts for T. trichiura and N. americanus applying two commercial kits, both with and without a prior bead beating step. The DNA concentration of T. trichiura and N. americanus was estimated by means of qPCR. The results showed clear differences in DNA concentration across both DNA extraction kits, which varied across both STHs. They also indicated that adding a bead beating step substantially improved DNA recovery, particularly when the FECs were high. In a second experiment, 20 stool samples with variable egg counts for A. lumbricoides, T. trichiura and N. americanus were preserved in either 96% ethanol, 5% potassium dichromate or RNA later and were stored at 4 degrees C for 65, 245 and 425 days. DNA was extracted using the DNeasy Blood & Tissue kit with a bead beating step. Stool samples preserved in ethanol proved to yield higher DNA concentrations as FEC increased, although stool samples appeared to be stable over time in all preservatives. Conclusions : The choice of DNA extraction kit significantly affects the outcome of NAATs. Given the clear benefit of bead beating and our validation of ethanol for (long-term) preservation, we recommend that these aspects of the protocol should be adopted by any stool sampling and DNA extraction protocol for downstream NAAT-based detection and quantification of STHs

DNA extraction from formalin-fixed Franciscana tissues

The present paper reports the extraction of DNA from formalin-fixed Pontoporia blainvillei tissues. Following the Vachot and Monerot (1996) protocol, fragmented DNA (300-700bp) was extracted from more than 95% of liver and muscle samples. DNA yield in liver samples was significantly higher than in muscle samples (4.574 ± 1.169mg DNA/mg versus 0.808 ± 0.297mg DNA/mg). Similar results were obtained from nine other species of cetaceans and five species of pinnipeds. It is of special interest to have a method that allows the utilisation of museum specimens not originally preserved for genetic studies, which may include rarely available, declining or extinct species. SPANISH: El presente trabajo reporta la extracción de ADN a partir de tejidos formolizados de Pontoporia blainvillei. Siguiendo el protocolo de Vachot y Monerot (1996) se pudo extraer ADN degradado (300-700pb) en más del 95% de las muestras de hígado y músculo analizadas. El rendimiento en ADN fue significativamente mayor en muestras de hígado que en muestras de músculo (4.574 ± 1.169mg DNA/mg tejido húmedo versus 0.808 ± 0.297mg DNA/mg tejido húmedo). Resultados similares se obtuvieron en otras nueve especies de Cetáceos y cinco de Pinnípedos. Resulta de gran interés contar con un método que permita la utilización de especímenes depositados en museos y que no hayan sido originalmente colectados para estudios genéticos, incluyendo especies de difícil obtención, en franca declinación o extintas

Efficient DNA isolation from moroccan arar tree [Tetraclinis articulata (Vahl) Masters] leaves and optimization of the rapd-pcr molecular technique

Efficient DNA isolation from Moroccan Arar tree [Tetraclinis articulata (Vahl) Masters] leaves and optimization of the RAPD-PCR molecular technique. Molecular genetic analysis of Arar tree [Tetraclinis articulata (Vahl) Masters] is often limited by the availability of fresh tissue and an efficient and reliable protocol for high quality genomic DNA extraction. In this study, two DNA extraction protocols were specifically developed for extracting high quality genomic DNA from Arar tree leaves: modified QIAgen DNA Kit and protocol developed by Ouenzar et al. (1998). DNA yield and purity were monitored by gel electrophoresis and by determining absorbance at UV (A260/A280 and A260/A230). Both ratios were between 1.7 and 2.0, indicating that the presence of contaminating metabolites was minimal. The DNA yield obtained ranged between 20 to 40 μg/g of plant materiel. The Ouenzar and collaborators protocol gave higher yield but was more time consuming compared to QIAgen Kit. However, both techniques gave DNA of good quality that is amenable to RAPD-PCR reactions. Additionally, restriction digestion and PCR analyses of the obtained DNA showed its compatibility with downstream applications. Randomly Amplified Polymorphic DNA profiling from the isolated DNA was optimized to produce scorable and clear amplicons. The presented protocols allow easy and high quality DNA isolation for genetic diversity studies within Arar tree

The Effects of Freezing on Faecal Microbiota as Determined Using MiSeq Sequencing and Culture-Based Investigations

peer-reviewedBackground High-throughput sequencing has enabled detailed insights into complex microbial environments, including the human gut microbiota. The accuracy of the sequencing data however, is reliant upon appropriate storage of the samples prior to DNA extraction. The aim of this study was to conduct the first MiSeq sequencing investigation into the effects of faecal storage on the microbiota, compared to fresh samples. Culture-based analysis was also completed. Methods Seven faecal samples were collected from healthy adults. Samples were separated into fresh (DNA extracted immediately), snap frozen on dry ice and frozen for 7 days at -80°C prior to DNA extraction or samples frozen at -80°C for 7 days before DNA extraction. Sequencing was completed on the Illumina MiSeq platform. Culturing of total aerobes, anaerobes and bifidobacteria was also completed. Results No significant differences at phylum or family levels between the treatment groups occurred. At genus level only Faecalibacterium and Leuconostoc were significantly different in the fresh samples compared to the snap frozen group (p = 0.0298; p = 0.0330 respectively). Diversity analysis indicated that samples clustered based on the individual donor, rather than by storage group. No significant differences occurred in the culture-based analysis between the fresh, snap or -80°C frozen samples. Conclusions Using the MiSeq platform coupled with culture-based analysis, this study highlighted that limited significant changes in microbiota occur following rapid freezing of faecal samples prior to DNA extraction. Thus, rapid freezing of samples prior to DNA extraction and culturing, preserves the integrity of the microbiota.Jennifer Deane is in receipt of a Teagasc Walsh Fellowship. The authors and their work were supported by the Science Foundation Ireland and funded by the Centre for Science, Engineering and Technology (SFI-CSET) grant 02/CE/B124 and by FP7 funded CFMATTERS (Cystic Fibrosis Microbiome-determined Antibiotic Therapy Trial in Exacerbations: Results Stratified, Grant Agreement no. 603038). The Alimentary Pharmabiotic Centre is a research centre funded by Science Foundation Ireland (SFI). This publication has emanated from research supported in part by a research grant from Science Foundation Ireland (SFI) under Grant Number SFI/12/RC/2273

An efficient protocol to perform genetic traceability of tissue and foods from Geoffroea decorticans

The quality of a DNA isolation method depends, among others, on the target tissue and the metabolites therein. Geoffroea decorticans Burkart (chanar) is a species that has nutritional and pharmacological potential. However, an effective method of DNA extraction capable of facilitating population studies and food genetic traceability has not been studied yet. The objective of the present work was to evaluate four methods of DNA extraction from leaves and chanar-based foods. The methods were evaluated based on yield, DNA purity, and molecular markers. The CCI-P (CTAB/Chloroform-Isoamylalcohol/pellet) method showed the highest yield of DNA obtained from leaves. However, the CPCI-SC (CTAB/Phenol-Chloroform-Isoamylalcohol/silica-column) method was the only one that resulted in acceptable DNA quality with both parameters (A260/A280 and A260/A230). The leaf DNA obtained with this method showed a greater amount of fragments with RAPD, and an acceptable amount of fragments with ISSR. On the other hand, the CCI-P method showed a higher yield of DNA from arrope de chanar (syrup). However, the CPCI-SC method was the only one that had relatively better DNA quality, which allowed the amplification of molecular markers. Regarding chanar flour, the CPCI-SC method showed the highest yield, DNA quality and good amplification with molecular markers. Therefore, the CPCI-SC extraction method is efficient for obtaining DNA from different matrices, and can support studies for a possible designation of origin of chanar-based foods