37 research outputs found
Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges
The use of in-band full-duplex (FD) enables nodes to simultaneously transmit
and receive on the same frequency band, which challenges the traditional
assumption in wireless network design. The full-duplex capability enhances
spectral efficiency and decreases latency, which are two key drivers pushing
the performance expectations of next-generation mobile networks. In less than
ten years, in-band FD has advanced from being demonstrated in research labs to
being implemented in standards and products, presenting new opportunities to
utilize its foundational concepts. Some of the most significant opportunities
include using FD to enable wireless networks to sense the physical environment,
integrate sensing and communication applications, develop integrated access and
backhaul solutions, and work with smart signal propagation environments powered
by reconfigurable intelligent surfaces. However, these new opportunities also
come with new challenges for large-scale commercial deployment of FD
technology, such as managing self-interference, combating cross-link
interference in multi-cell networks, and coexistence of dynamic time division
duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa
Full-Duplex Cloud Radio Access Network: Stochastic Design and Analysis
Full-duplex (FD) has emerged as a disruptive communications paradigm for
enhancing the achievable spectral efficiency (SE), thanks to the recent major
breakthroughs in self-interference (SI) mitigation. The FD versus half-duplex
(HD) SE gain, in cellular networks, is however largely limited by the
mutual-interference (MI) between the downlink (DL) and the uplink (UL). A
potential remedy for tackling the MI bottleneck is through cooperative
communications. This paper provides a stochastic design and analysis of FD
enabled cloud radio access network (C-RAN) under the Poisson point process
(PPP)-based abstraction model of multi-antenna radio units (RUs) and user
equipments (UEs). We consider different disjoint and user-centric approaches
towards the formation of finite clusters in the C-RAN. Contrary to most
existing studies, we explicitly take into consideration non-isotropic fading
channel conditions and finite-capacity fronthaul links. Accordingly,
upper-bound expressions for the C-RAN DL and UL SEs, involving the statistics
of all intended and interfering signals, are derived. The performance of the FD
C-RAN is investigated through the proposed theoretical framework and
Monte-Carlo (MC) simulations. The results indicate that significant FD versus
HD C-RAN SE gains can be achieved, particularly in the presence of
sufficient-capacity fronthaul links and advanced interference cancellation
capabilities
Full-duplex wireless communications: challenges, solutions and future research directions
The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication
Rate adaptive resource allocation with fairness control for OFDMA networks
The use of opportunistic radio resource allocation techniques in order to efficiently manage the resources generates
a low fairness among the users in a cellular system due to uneven Quality of Service (QoS) distribution. Some classic rate adaptive policies tried to tackle this problem for OFDMA systems by
proposing solutions to maximize capacity, maximize fairness, or find a static trade-off between these two objectives. This
work generalizes these classic policies and propose a dynamic fairness/rate adaptive technique based on dynamic sub-carrier
assignment and equal power allocation that considers a new fairness constraint in the optimization problem. By means of
extensive system-level simulations, it is demonstrated that the
proposed technique is able to provide an instantaneous (short-term) fairness control, which provides to the network operator
the flexibility to operate on any desired trade-off point.Peer ReviewedPostprint (published version
Recommended from our members
System design issues in dense urban millimeter wave cellular networks
Upcoming deployments of cellular networks will see an increasing use of millimeter wave (mmWave) frequencies, roughly between 20-100 GHz. The goal of this dissertation is to investigate some key design issues in dense urban mmWave cellular networks by developing mathematical models that are representative of these networks.
In the first contribution, stochastic geometry (SG) is used to study the per user rate performance of multi-user MIMO (MU-MIMO) in downlink mmWave cellular network incorporating the impact of a spatially sparse blockage dependent multipath channel and hybrid precoding. Performance of MU-MIMO is then compared with single-user beamforming and spatial multiplexing in different network scenarios considering coverage, rate and power consumption tradeoffs to suggest when to use which MIMO scheme.
The second contribution reconsiders a popular received signal power model used in system capacity analysis of MIMO wireless networks employing single user beamforming. A modification is suggested to the model by introducing a correction factor. An approximate analysis is done to justify incorporating such a factor and simulations are performed to validate it's importance. Although this contribution does not study a new system design issue for mmWave cellular, it highlights a shortcoming with using the popular received signal power model to study design issues in mmWave cellular networks.
The third and fourth contributions investigate resource allocation in self-backhauled mmWave cellular networks. In order to enable affordable initial deployments of mmWave cellular, self-backhauling is envisioned as a cost-saving solution. The third contribution investigates how to divide resources between uplink and downlink for access and backhaul in self-backhauled networks with single hop wireless backhauling. The performance of dynamic time division duplexing (TDD) and integrated access-backhaul (IAB) is compared with static TDD and orthogonal access backhaul (OAB) strategies using a SG based model. The last contribution of this dissertation addresses the following key question for self-backhauled networks. What is the maximum extended coverage area that a single fiber site can support using multi-hop relaying, while still achieving a minimum target per user data rate? The problem of maximizing minimum per user rates is studied considering a series of deployments with a single fiber site and varying number of relays. Several design guidelines for multi-hop mmWave cellular networks are provided based on the analytical and empirical results.Electrical and Computer Engineerin
D13.3 Overall assessment of selected techniques on energy- and bandwidth-efficient communications
Deliverable D13.3 del projecte europeu NEWCOM#The report presents the outcome of the Joint Research Activities (JRA) of WP1.3 in the last year of the Newcom# project. The activities focus on the investigation of bandwidth and energy efficient techniques for current and emerging wireless systems. The JRAs are categorized in three Tasks: (i) the first deals with techniques for power efficiency and minimization at the transceiver and network level; (ii) the second deals with the handling of interference by appropriate low interference transmission techniques; (iii) the third is concentrated on Radio Resource Management (RRM) and Interference Management (IM) in selected scenarios, including HetNets and multi-tier networks.Peer ReviewedPostprint (published version