12,857 research outputs found
Mechanistic studies on DNA damage by minor groove binding copper–phenanthroline conjugates
Copper–phenanthroline complexes oxidatively damage and cleave nucleic acids. Copper bis-phenanthroline and copper complexes of mono- and bis-phenanthroline conjugates are used as research tools for studying nucleic acid structure and binding interactions. The mechanism of DNA oxidation and cleavage by these complexes was examined using two copper–phenanthroline conjugates of the sequence-specific binding molecule, distamycin. The complexes contained either one or two phenanthroline units that were bonded to the DNA-binding domain through a linker via the 3-position of the copper ligand. A duplex containing independently generated 2-deoxyribonolactone facilitated kinetic analysis of DNA cleavage. Oxidation rate constants were highly dependent upon the ligand environment but rate constants describing elimination of the alkali-labile 2-deoxyribonolactone intermediate were not. Rate constants describing DNA cleavage induced by each molecule were 11–54 times larger than the respective oxidation rate constants. The experiments indicate that DNA cleavage resulting from β-elimination of 2-deoxyribonolactone by copper–phenanthroline complexes is a general mechanism utilized by this family of molecules. In addition, the experiments confirm that DNA damage mediated by mono- and bis-phenanthroline copper complexes proceeds through distinct species, albeit with similar outcomes
Solid-state structure of copper complexes of N-(2-carboxyethyl)chitosan
The sorptivity for ions of the Irving-Williams series (Zn2+, Cu2+, Co2+, Ni2+) was estimated for the chelate sorbent N-(2-carboxyethyl)chitosan cross-linked by nanosecond electron-beam irradiation. The maximum capacity reaches 3.7 mmol/g using a mixture of the appropriate sulfates at pH 4.5. The selectivity of copper sorption is 80%. The structure of the coordination sphere of the copper complexes with N-(2-carboxyethyl)chitosan was investigated by ESR spectroscopy
Highly photoluminescent copper carbene complexes based on prompt rather than delayed fluorescence
Linear two-coordinate copper complexes of cyclic (alkyl)(amino)-carbenes (CAAC)CuX (X = halide) show photoluminescence with solid-state quantum yields of up to 96%; in contrast to previously reported Cu photoemitters the emission is independent of temperature over the range T = 4 – 300 K and occurs very efficiently by prompt rather than delayed fluorescence, with lifetimes in the sub-nanosecond range
An investigation into the unusual linkage isomerization and nitrite reduction activity of a novel tris(2-pyridyl) copper complex
The copper-containing nitrite reductases (CuNIRs) are a class of enzymes that mediate the reduction of nitrite to nitric oxide in biological systems. Metal–ligand complexes that reproduce the salient features of the active site of CuNIRs are therefore of fundamental interest, both for elucidating the possible mode of action of the enzymes and for developing biomimetic catalysts for nitrite reduction. Herein, we describe the synthesis and characterization of a new tris(2-pyridyl) copper complex ([Cu1(NO2)2]) that binds two molecules of nitrite, and displays all three of the common binding modes for NO2−, with one nitrite bound in an asymmetric quasi-bidentate κ2-ONO manner and the other bound in a monodentate fashion with a linkage isomerism between the κ1-ONO and κ1-NO2 binding modes. We use density functional theory to help rationalize the presence of all three of these linkage isomers in one compound, before assessing the redox activity of [Cu1(NO2)2]. These latter studies show that the complex is not a competent nitrite reduction electrocatalyst in non-aqueous solvent, even in the presence of additional proton donors, a finding which may have implications for the design of biomimetic catalysts for nitrite reduction
Coordination of Cu(II) and Ni(II) in polymers imprinted so as to optimize amine chelate formation
Molecular imprinting has become an established technique. However, little was done on direct investigation of the sorbents produced. In the present work, en ESR method was used for the investigation of the complex formation processes within the sorbents imprinted with copper(II) and nickel(II). The sorbents were synthesized from a mixture of linear low molecular weight polyethyleneimine oligomers. The composition, structure and distribution of complexes in the resin phase were investigated. The effects of the synthesis conditions, loading degree and water content were examined. The presence of certain copper complexes was found to be a convenient characteristic of the imprinting efficiency. The optimum synthesis conditions for obtaining sorbents imprinted with copper(II) or nickel(II) were identified. The imprinting results in the improvement of the stability of the complexes and the selectivity and working capacity of the sorbents. The imprinted samples are also characterized by a more even distribution of chelating sites. The synthesis conditions and loading by ions allow for the regulation of the ratio between individual complexes and magnetic associates in the resin phase. This is a critical point on the future use of the metal containing imprinted sorbents as catalysts. (C) 2003 Published by Elsevier Science Ltd
Isolation of bis(copper) key intermediates in Cu-catalyzed azide-alkyne "click reaction".
The copper-catalyzed 1,3-dipolar cycloaddition of an azide to a terminal alkyne (CuAAC) is one of the most popular chemical transformations, with applications ranging from material to life sciences. However, despite many mechanistic studies, direct observation of key components of the catalytic cycle is still missing. Initially, mononuclear species were thought to be the active catalysts, but later on, dinuclear complexes came to the front. We report the isolation of both a previously postulated π,σ-bis(copper) acetylide and a hitherto never-mentioned bis(metallated) triazole complex. We also demonstrate that although mono- and bis-copper complexes promote the CuAAC reaction, the dinuclear species are involved in the kinetically favored pathway
Therapeutic potential of the phosphino Cu(I) complex (HydroCuP) in the treatment of solid tumors
[Cu(thp)4][PF6] (HydroCuP) is a phosphino copper(I) complex highly soluble and stable in physiological media that has been developed as a possible viable alternative to platinum-based drugs for anticancer therapy. HydroCuP potently inhibited the growth of human cancer cells derived from solid tumors by inducing endoplasmatic reticulum (ER) stress thus leading to cell death through paraptosis with a preferential efficacy against cancer rather than non-cancer cells. Aim of the present study was to assess the therapeutic potential of HydroCuP in vivo, in syngenic and xenograft murine models of solid tumors by triggering the Unfolded Protein Response (UPR) pathway. With respect to platinum drugs, HydroCuP induced a markedly higher reduction of tumor growth associated with minimal animal toxicity. In human colorectal cancer xenografts, chemotherapy with HydroCuP was extremely effective in both oxaliplatin-sensitive and resistant models. The favorable in vivo tolerability of HydroCuP was also correlated to an encouraging biodistribution profile. Additionally, no signs of drug-related neurotoxicity and nephrotoxicity were observed. Altogether, these results demonstrate that HydroCuP appears worth of further investigation to evaluate its therapeutic activity towards a broad spectrum of solid malignancies
The synthesis and the catalytic (catalase and tyrosinase) activities of amino acid copper complexes covalently grafted onto silica gel
In this work the synthesis, structure and certain catalytic properties of amino acid copper complexes covalently grafted onto silica gel are described. The following enzyme mimicking complexes were synthesized and characterised by experimental (FT-IR) and computational (mainly MM+) methods: BOC-His-Cu/silica gel, BOC-Tyr-Cu/silica gel, His-OMe-Cu/silica gel, Tyr-OMe-Cu/silica gel, H-His-Cu/silica gel, H-Tyr-Cu/silica gel His-OH-Cu/silica gel and Tyr-OH-Cu/silica gel. The activities of these substances were also tested in the decomposition of hydrogen peroxide. The majority of the substances proved to be good enzyme mimics displaying either catalase or tyrosinase activity
Di- and Trinuclear Mixed-Valence Copper Amidinate Complexes from Reduction of Iodine
Molecular examples of mixed-valence copper complexes through chemical oxidation are rare but invoked in the mechanism of substrate activation, especially oxygen, in copper-containing enzymes. To examine the cooperative chemistry between two metals in close proximity to each other we began studying the reactivity of a dinuclear Cu(I) amidinate complex. The reaction of [(2,6-Me2C6H3N)2C(H)]2Cu2, 1, with I2 in tetrahydrofuran (THF), CH3CN, and toluene affords three new mixed-valence copper complexes [(2,6-Me2C6H3N)2C(H)]2Cu2(μ2-I3)(THF)2, 2, [(2,6-Me2C6H3N)2C(H)]2Cu2(μ2-I) (NCMe)2, 3, and [(2,6-Me2C6H3N)2C(H)]3Cu3(μ3-I)2, 4, respectively. The first two compounds were characterized by UV-vis and electron paramagnetic resonance spectroscopies, and their molecular structure was determined by X-ray crystallography. Both di- and trinuclear mixed-valence intermediates were characterized for the reaction of compound 1 to compound 4, and the molecular structure of 4 was determined by X-ray crystallography. The electronic structure of each of these complexes was also investigated using density functional theory
Functional and structural mimics of superoxide dismutase enzymes
Superoxide dismutase (SOD) enzymes form important defence line in living organisms. Through a dismutation reaction they transform the highly reactive superoxide radical ion to oxygen and hydrogen peroxide. The latter compound is further transformed by catalase or peroxidase enzymes to water and oxygen. The overall structure of the enzymes and those of the active sites are largely known, thus, it has been revealed that in eukaryotes Cu(II) and Zn(II) ions act as cofactors and they are connected with an imidazolate bridge and this structural unit is coordinated with amino acids. In prokaryotes the SOD enzymes contain Mn(II) or Fe(II) or Ni(II) in their active centres. In order to learn about the working mechanism of SOD enzymes at the molecular level various structural mimics were prepared and their structural transformations during the dismutation reaction was followed. Gathering adequate amount of information allowed the preparation of functional mimics that are not necessarily copies of the active sites of the enzymes, nevertheless, display considerable SOD activity. Both functional and structural mimics are comprehensively dealt with in this review. Although enzymes may seem to be attractive catalysts for promoting real-life reactions effectively with high selectivity, they can seldom if ever be used under industrial conditions, i.e. at high temperatures and pressures. The SOD enzymes for promoting oxygen transfer reactions are not durable enough under these conditions either. The complexes mimicking SOD activities perform better in this respect, however, their reusabilities are limited, because of separation problems. A solution can be the immobilisation of these SOD mimicking complexes on solid or semi-solid supports. Even if the activity is not better then the support-free complexes, the catalyst can be filtered at the end of the reaction and can easily be recycled. Attempts for immobilisation are also comprehensively reviewed and immobilised complexes with surprisingly high SOD activities are reported as well. Full characterisation of these materials is given and rationalisation of their exceptionally high activities is offered
- …
