27,466 research outputs found
Vision-Based Lane-Changing Behavior Detection Using Deep Residual Neural Network
Accurate lane localization and lane change detection are crucial in advanced
driver assistance systems and autonomous driving systems for safer and more
efficient trajectory planning. Conventional localization devices such as Global
Positioning System only provide road-level resolution for car navigation, which
is incompetent to assist in lane-level decision making. The state of art
technique for lane localization is to use Light Detection and Ranging sensors
to correct the global localization error and achieve centimeter-level accuracy,
but the real-time implementation and popularization for LiDAR is still limited
by its computational burden and current cost. As a cost-effective alternative,
vision-based lane change detection has been highly regarded for affordable
autonomous vehicles to support lane-level localization. A deep learning-based
computer vision system is developed to detect the lane change behavior using
the images captured by a front-view camera mounted on the vehicle and data from
the inertial measurement unit for highway driving. Testing results on
real-world driving data have shown that the proposed method is robust with
real-time working ability and could achieve around 87% lane change detection
accuracy. Compared to the average human reaction to visual stimuli, the
proposed computer vision system works 9 times faster, which makes it capable of
helping make life-saving decisions in time
The State-of-the-art of Coordinated Ramp Control with Mixed Traffic Conditions
Ramp metering, a traditional traffic control strategy for conventional
vehicles, has been widely deployed around the world since the 1960s. On the
other hand, the last decade has witnessed significant advances in connected and
automated vehicle (CAV) technology and its great potential for improving
safety, mobility and environmental sustainability. Therefore, a large amount of
research has been conducted on cooperative ramp merging for CAVs only. However,
it is expected that the phase of mixed traffic, namely the coexistence of both
human-driven vehicles and CAVs, would last for a long time. Since there is
little research on the system-wide ramp control with mixed traffic conditions,
the paper aims to close this gap by proposing an innovative system architecture
and reviewing the state-of-the-art studies on the key components of the
proposed system. These components include traffic state estimation, ramp
metering, driving behavior modeling, and coordination of CAVs. All reviewed
literature plot an extensive landscape for the proposed system-wide coordinated
ramp control with mixed traffic conditions.Comment: 8 pages, 1 figure, IEEE INTELLIGENT TRANSPORTATION SYSTEMS CONFERENCE
- ITSC 201
Business Case and Technology Analysis for 5G Low Latency Applications
A large number of new consumer and industrial applications are likely to
change the classic operator's business models and provide a wide range of new
markets to enter. This article analyses the most relevant 5G use cases that
require ultra-low latency, from both technical and business perspectives. Low
latency services pose challenging requirements to the network, and to fulfill
them operators need to invest in costly changes in their network. In this
sense, it is not clear whether such investments are going to be amortized with
these new business models. In light of this, specific applications and
requirements are described and the potential market benefits for operators are
analysed. Conclusions show that operators have clear opportunities to add value
and position themselves strongly with the increasing number of services to be
provided by 5G.Comment: 18 pages, 5 figure
Sparse Signal Processing Concepts for Efficient 5G System Design
As it becomes increasingly apparent that 4G will not be able to meet the
emerging demands of future mobile communication systems, the question what
could make up a 5G system, what are the crucial challenges and what are the key
drivers is part of intensive, ongoing discussions. Partly due to the advent of
compressive sensing, methods that can optimally exploit sparsity in signals
have received tremendous attention in recent years. In this paper we will
describe a variety of scenarios in which signal sparsity arises naturally in 5G
wireless systems. Signal sparsity and the associated rich collection of tools
and algorithms will thus be a viable source for innovation in 5G wireless
system design. We will discribe applications of this sparse signal processing
paradigm in MIMO random access, cloud radio access networks, compressive
channel-source network coding, and embedded security. We will also emphasize
important open problem that may arise in 5G system design, for which sparsity
will potentially play a key role in their solution.Comment: 18 pages, 5 figures, accepted for publication in IEEE Acces
Learning and Management for Internet-of-Things: Accounting for Adaptivity and Scalability
Internet-of-Things (IoT) envisions an intelligent infrastructure of networked
smart devices offering task-specific monitoring and control services. The
unique features of IoT include extreme heterogeneity, massive number of
devices, and unpredictable dynamics partially due to human interaction. These
call for foundational innovations in network design and management. Ideally, it
should allow efficient adaptation to changing environments, and low-cost
implementation scalable to massive number of devices, subject to stringent
latency constraints. To this end, the overarching goal of this paper is to
outline a unified framework for online learning and management policies in IoT
through joint advances in communication, networking, learning, and
optimization. From the network architecture vantage point, the unified
framework leverages a promising fog architecture that enables smart devices to
have proximity access to cloud functionalities at the network edge, along the
cloud-to-things continuum. From the algorithmic perspective, key innovations
target online approaches adaptive to different degrees of nonstationarity in
IoT dynamics, and their scalable model-free implementation under limited
feedback that motivates blind or bandit approaches. The proposed framework
aspires to offer a stepping stone that leads to systematic designs and analysis
of task-specific learning and management schemes for IoT, along with a host of
new research directions to build on.Comment: Submitted on June 15 to Proceeding of IEEE Special Issue on Adaptive
and Scalable Communication Network
Recommended from our members
Development of Eco-Friendly Ramp Control for Connected and Automated Electric Vehicles
With on-board sensors such as camera, radar, and Lidar, connected and automated vehicles (CAVs) can sense the surrounding environment and be driven autonomously and safely by themselves without colliding into other objects on the road. CAVs are also able to communicate with each other and roadside infrastructure via vehicle-to-vehicle and vehicle-to-infrastructure communications, respectively, sharing information on the vehicles’ states, signal phase and timing (SPaT) information, enabling CAVs to make decisions in a collaborative manner. As a typical scenario, ramp control attracts wide attention due to the concerns of safety and mobility in the merging area. In particular, if the line-of-the-sight is blocked (because of grade separation), then neither mainline vehicles nor on-ramp vehicles may well adapt their own dynamics to perform smoothed merging maneuvers. This may lead to speed fluctuations or even shockwave propagating upstream traffic along the corridor, thus potentially increasing the traffic delays and excessive energy consumption. In this project, the research team proposed a hierarchical ramp merging system that not only allowed microscopic cooperative maneuvers for connected and automated electric vehicles on the ramp to merge into mainline traffic flow, but also had controllability of ramp inflow rate, which enabled macroscopic traffic flow control. A centralized optimal control-based approach was proposed to both smooth the merging flow and improve the system-wide mobility of the network. Linear quadratic trackers in both finite horizon and receding horizon forms were developed to solve the optimization problem in terms of path planning and sequence determination, and a microscopic electric vehicle (EV) energy consumption model was applied to estimate the energy consumption. The simulation results confirmed that under the regulated inflow rate, the proposed system was able to avoid potential traffic congestion and improve the mobility (in terms of average speed) as much as 115%, compared to the conventional ramp metering and the ramp without any control approach. Interestingly, for EVs (connected and automated EVs in this study), the improved mobility may not necessarily result in the reduction of energy consumption. The “sweet spot” of average speed ranges from 27–34 mph for the EV models in this study.View the NCST Project Webpag
A robot swarm assisting a human fire-fighter
Emergencies in industrial warehouses are a major concern for fire-fighters. The large dimensions, together with the development of dense smoke that drastically reduces visibility, represent major challenges. The GUARDIANS robot swarm is designed to assist fire-fighters in searching a large warehouse. In this paper we discuss the technology developed for a swarm of robots assisting fire-fighters. We explain the swarming algorithms that provide the functionality by which the robots react to and follow humans while no communication is required. Next we discuss the wireless communication system, which is a so-called mobile ad-hoc network. The communication network provides also the means to locate the robots and humans. Thus, the robot swarm is able to provide guidance information to the humans. Together with the fire-fighters we explored how the robot swarm should feed information back to the human fire-fighter. We have designed and experimented with interfaces for presenting swarm-based information to human beings
A Decentralized Mobile Computing Network for Multi-Robot Systems Operations
Collective animal behaviors are paradigmatic examples of fully decentralized
operations involving complex collective computations such as collective turns
in flocks of birds or collective harvesting by ants. These systems offer a
unique source of inspiration for the development of fault-tolerant and
self-healing multi-robot systems capable of operating in dynamic environments.
Specifically, swarm robotics emerged and is significantly growing on these
premises. However, to date, most swarm robotics systems reported in the
literature involve basic computational tasks---averages and other algebraic
operations. In this paper, we introduce a novel Collective computing framework
based on the swarming paradigm, which exhibits the key innate features of
swarms: robustness, scalability and flexibility. Unlike Edge computing, the
proposed Collective computing framework is truly decentralized and does not
require user intervention or additional servers to sustain its operations. This
Collective computing framework is applied to the complex task of collective
mapping, in which multiple robots aim at cooperatively map a large area. Our
results confirm the effectiveness of the cooperative strategy, its robustness
to the loss of multiple units, as well as its scalability. Furthermore, the
topology of the interconnecting network is found to greatly influence the
performance of the collective action.Comment: Accepted for Publication in Proc. 9th IEEE Annual Ubiquitous
Computing, Electronics & Mobile Communication Conferenc
- …