A hybrid multilevel converter for medium and high voltage applications

This paper investigates the suitability of the hybrid multilevel converter for medium and high voltage application. The converter operation, modulation, and capacitor voltage balancing method are described in detail. The ability of the hybrid multilevel converter to operate with different modulation indices and load power factors is investigated. It has been established that the hybrid multilevel converter is capable of operating independent of load power factor. Operation with variable modulation index increases voltage stresses on the converter switches and does not alter the fundamental voltage magnitude as in all known voltage source converter topologies. The viability of the hybrid multilevel converter for medium and high voltage applications is confirmed by simulations

Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating

This paper compares the newly developed single-phase matrix converter and the more conventional H- bridge converter for radio frequency induction heating. Both the converters exhibit unity power factor, very low total harmonic distortion at the utility supply interface, good controllability under soft switching condition for a wide range of power, and high efficiencies, whilst still having simple structures. A novel switching control pattern has been proposed for the matrix converter in order to maintain the comparable performance to the H-bridge converter. Simulation and experimental results for both converters are presented. Comparisons between two converters have confirmed the excellent performance of the proposed matrix converter

Development of a dc-ac power conditioner for wind generator by using neural network

This project present of development single phase DC-AC converter for wind generator application. The mathematical model of the wind generator and Artificial Neural Network control for DC-AC converter is derived. The controller is designed to stabilize the output voltage of DC-AC converter. To verify the effectiveness of the proposal controller, both simulation and experimental are developed. The simulation and experimental result show that the amplitude of output voltage of the DC-AC converter can be controlled

Investigation of Fault-Tolerant Capabilities in an Advanced Three-Level Active T-Type Converter

A novel fault-tolerant three-level power converter topology, named advanced three-level active T-Type (A3L-ATT) converter, is introduced to increase the reliability of multilevel power converters used in safety-critical applications. This new fault-tolerant multilevel power converter is derived from the conventional T-Type converter topology. The topology has significantly improved the fault-tolerant capability under any open circuit or certain short-circuit faults in the semiconductor devices. In addition, under healthy condition, the redundant phase leg can be utilized to share overload current with other main legs, which enhances the overload capability of the converter. The conduction losses in the original outer devices can be reduced by sharing the load current with the redundant leg. Moreover, unlike other existing fault-tolerant power converters in the literature, full output voltages can be always obtained in this proposed A3L-ATT converter during fault-tolerant operation. A 13.5-kW ATT-A3L converter prototype was developed and constructed using silicon carbide MOSFETs. Simulation and experimental results were obtained to substantiate the theoretical claims of this new fault-tolerant power converter

A Novel Cyclic Time to Digital Converter Based on Triple-Slope Interpolation and Time Amplification

This paper investigates a novel cyclic time-to-digital converter (TDC) which employs triple-slope analog interpolation and time amplification techniques for digitizing the time interval between the rising edges of two input signals(Start and Stop). The proposed converter will be a 9-bit cyclic time-to-digital converter that does not use delay lines in its structure. Therefore, it has a low sensitivity to temperature, power supply and process (PVT) variations. The other advantages of the proposed converter are low circuit complexity, and high accuracy compared with the time-to-digital converters that have previously been proposed. Also, this converter improves the time resolution and the dynamic range. In the same resolution, linear range and dynamic range, the proposed cyclic TDC reduces the number of circuit elements compared with the converters that have a similar circuit structure. Thus, the converter reduces the chip area, the power consumption and the figure of merit (FoM). In this converter, the integral nonlinearity (INL) and differential nonlinearity (DNL) errors are reduced. In order to evaluate the idea, the proposed time-to-digital converter is designed in TSMC 45 nm CMOS technology and simulated. Comparison of the theoretical and simulation results confirms the benefits of the proposed TDC

Magnon-driven quantum-dot heat engine

We investigate a heat- to charge-current converter consisting of a single-level quantum dot coupled to two ferromagnetic metals and one ferromagnetic insulator held at different temperatures. We demonstrate that this nano engine can act as an optimal heat to spin-polarized charge current converter in an antiparallel geometry, while it acts as a heat to pure spin current converter in the parallel case. We discuss the maximal output power of the device and its efficiency.Comment: 6 pages, 4 figures, published version, selected as Editor's choic

A bridgeless Cuk PFC converter

A bridgeless Power Factor Correction (PFC) circuit based on Cuk converter is proposed in this paper. The operation during each sub-interval modes of the converter operated in Discontinuous Conduction Mode (DCM) is discussed. The smallsignal and large signal models are presented using Current Injected Equivalent Circuit Approach (CIECA). PLECS/Simulink is used to verify the capability of the proposed converter to regulate the output voltage while the input current regulation is inherent. This converter is capable to operate in universal input voltage condition

Analog-to-digital converter has increased reliability and reduced power consumption

Eight-bit analog-to-digital converter decreases average power consumption and increases component reliability. The converter uses solid-state components in pulse operation and magnetic core components for minimizing power consumption. The magnetic core components also increase reliability