Self-concatenated code design and its application in power-efficient cooperative communications

In this tutorial, we have focused on the design of binary self-concatenated coding schemes with the help of EXtrinsic Information Transfer (EXIT) charts and Union bound analysis. The design methodology of future iteratively decoded self-concatenated aided cooperative communication schemes is presented. In doing so, we will identify the most important milestones in the area of channel coding, concatenated coding schemes and cooperative communication systems till date and suggest future research directions

On Maximum Contention-Free Interleavers and Permutation Polynomials over Integer Rings

An interleaver is a critical component for the channel coding performance of turbo codes. Algebraic constructions are of particular interest because they admit analytical designs and simple, practical hardware implementation. Contention-free interleavers have been recently shown to be suitable for parallel decoding of turbo codes. In this correspondence, it is shown that permutation polynomials generate maximum contention-free interleavers, i.e., every factor of the interleaver length becomes a possible degree of parallel processing of the decoder. Further, it is shown by computer simulations that turbo codes using these interleavers perform very well for the 3rd Generation Partnership Project (3GPP) standard.Comment: 13 pages, 2 figures, submitted as a correspondence to the IEEE Transactions on Information Theory, revised versio

Distributed Self-Concatenated Coding for Cooperative Communication

In this paper, we propose a power-efficient distributed binary self-concatenated coding scheme using iterative decoding (DSECCC-ID) for cooperative communications. The DSECCC-ID scheme is designed with the aid of binary extrinsic information transfer (EXIT) charts. The source node transmits self-concatenated convolutional coded (SECCC) symbols to both the relay and destination nodes during the first transmission period. The relay performs SECCC-ID decoding, where it mayor may not encounter decoding errors. It then reencodes the information bits using a recursive systematic convolutional (RSC) code during the second transmission period. The resultant symbols transmitted from the source and relay nodes can be viewed as the coded symbols of a three-component parallel concatenated encoder. At the destination node, three-component DSECCC-ID decoding is performed. The EXIT chart gives us an insight into operation of the distributed coding scheme, which enables us to significantly reduce the transmit power by about 3.3 dB in signal-to-noise ratio (SNR) terms, as compared with a noncooperative SECCC-ID scheme at a bit error rate (BER) of 10-5. Finally, the proposed system is capable of performing within about 1.5 dB from the two-hop relay-aided network’s capacity at a BER of 10-5 , even if there may be decoding errors at the relay

Iterative Slepian-Wolf Decoding and FEC Decoding for Compress-and-Forward Systems

While many studies have concentrated on providing theoretical analysis for the relay assisted compress-and-forward systems little effort has yet been made to the construction and evaluation of a practical system. In this paper a practical CF system incorporating an error-resilient multilevel Slepian-Wolf decoder is introduced and a novel iterative processing structure which allows information exchanging between the Slepian-Wolf decoder and the forward error correction decoder of the main source message is proposed. In addition, a new quantization scheme is incorporated as well to avoid the complexity of the reconstruction of the relay signal at the final decoder of the destination. The results demonstrate that the iterative structure not only reduces the decoding loss of the Slepian-Wolf decoder, it also improves the decoding performance of the main message from the source

Receiver Architectures for MIMO-OFDM Based on a Combined VMP-SP Algorithm

Iterative information processing, either based on heuristics or analytical frameworks, has been shown to be a very powerful tool for the design of efficient, yet feasible, wireless receiver architectures. Within this context, algorithms performing message-passing on a probabilistic graph, such as the sum-product (SP) and variational message passing (VMP) algorithms, have become increasingly popular. In this contribution, we apply a combined VMP-SP message-passing technique to the design of receivers for MIMO-ODFM systems. The message-passing equations of the combined scheme can be obtained from the equations of the stationary points of a constrained region-based free energy approximation. When applied to a MIMO-OFDM probabilistic model, we obtain a generic receiver architecture performing iterative channel weight and noise precision estimation, equalization and data decoding. We show that this generic scheme can be particularized to a variety of different receiver structures, ranging from high-performance iterative structures to low complexity receivers. This allows for a flexible design of the signal processing specially tailored for the requirements of each specific application. The numerical assessment of our solutions, based on Monte Carlo simulations, corroborates the high performance of the proposed algorithms and their superiority to heuristic approaches

On joint detection and decoding of linear block codes on Gaussian vector channels

Optimal receivers recovering signals transmitted across noisy communication channels employ a maximum-likelihood (ML) criterion to minimize the probability of error. The problem of finding the most likely transmitted symbol is often equivalent to finding the closest lattice point to a given point and is known to be NP-hard. In systems that employ error-correcting coding for data protection, the symbol space forms a sparse lattice, where the sparsity structure is determined by the code. In such systems, ML data recovery may be geometrically interpreted as a search for the closest point in the sparse lattice. In this paper, motivated by the idea of the "sphere decoding" algorithm of Fincke and Pohst, we propose an algorithm that finds the closest point in the sparse lattice to the given vector. This given vector is not arbitrary, but rather is an unknown sparse lattice point that has been perturbed by an additive noise vector whose statistical properties are known. The complexity of the proposed algorithm is thus a random variable. We study its expected value, averaged over the noise and over the lattice. For binary linear block codes, we find the expected complexity in closed form. Simulation results indicate significant performance gains over systems employing separate detection and decoding, yet are obtained at a complexity that is practically feasible over a wide range of system parameters

Uplink CoMP under a Constrained Backhaul and Imperfect Channel Knowledge

Coordinated Multi-Point (CoMP) is known to be a key technology for next generation mobile communications systems, as it allows to overcome the burden of inter-cell interference. Especially in the uplink, it is likely that interference exploitation schemes will be used in the near future, as they can be used with legacy terminals and require no or little changes in standardization. Major drawbacks, however, are the extent of additional backhaul infrastructure needed, and the sensitivity to imperfect channel knowledge. This paper jointly addresses both issues in a new framework incorporating a multitude of proposed theoretical uplink CoMP concepts, which are then put into perspective with practical CoMP algorithms. This comprehensive analysis provides new insight into the potential usage of uplink CoMP in next generation wireless communications systems.Comment: Submitted to IEEE Transactions on Wireless Communications in February 201

Iterative Multiuser Detection and Decoding with Spatially Coupled Interleaving

Spatially coupled (SC) interleaving is proposed to improve the performance of iterative multiuser detection and decoding (MUDD) for quasi-static fading multiple-input multiple-output systems. The linear minimum mean-squared error (LMMSE) demodulator is used to reduce the complexity and to avoid error propagation. Furthermore, sliding window MUDD is proposed to circumvent an increase of the decoding latency due to SC interleaving. Theoretical and numerical analyses show that SC interleaving can improve the performance of the iterative LMMSE MUDD for regular low-density parity-check codes.Comment: Long version of a paper submitted to IEEE Wireless Commun. Let