Ring-Based Resonant Standing Wave Oscillators for 3D Clocking Applications

Ring-based resonant standing wave oscillators have been shown to be a useful clocking tech-nique that can distribute and generate a high frequency, low skew, low power, and stable clock signal. By using through-silicon-vias, this type of standing wave oscillator can be used to gener-ate the clocking scheme for 3D integrated circuits. In this thesis, we propose the use of such 3D standing wave oscillators and show how independent 3D oscillators in different stacks can syn-chronize through the use of a redistribution layer stub. Inter-chip clock synchronization is then accomplished without the need for a PLL. In addition, we propose the first 3D ring-based resonant standing wave oscillator bootstrap and reset circuit to initialize and stop oscillation. Using a 3D ring-based resonant standing wave oscillator, we propose a ring-based data fabric for 3D stacked DRAM and compare the results with existing approaches such as High Bandwidth Memory (HBM) or Wide I/O memory. We show that our Memory Architecture using a Ring-based Scheme (MARS) can provide the increases in speed necessary to overcome current memory bottlenecks, and can scale effectively as future 3D stacks become larger. Our MARS can trade off power, throughput, and latency to match different application requirements. By using a narrow bus, and connecting it to all channels, the MARS8 can provide an alternative memory configuration with ∼ 6.9× lower power consumption than HBM, and ∼ 2.7× faster speeds than Wide I/O. Using multiple ring topologies in the same stack, the channel count can double from 8 to 16, and then to 32. This is possible since MARS uses about 4× fewer TSVs per channel than HBM or Wide I/O. This provides speeds up to ∼ 4.2× faster than traditional HBM. This scalable architecture allows higher throughput and faster system performance for next-generation DRAM. The MARS topology proposed in this thesis can be used in a variety of computing systems, from lightweight IoT to large-scale data centers

Proceedings of the 5th International Workshop on Reconfigurable Communication-centric Systems on Chip 2010 - ReCoSoC\u2710 - May 17-19, 2010 Karlsruhe, Germany. (KIT Scientific Reports ; 7551)

ReCoSoC is intended to be a periodic annual meeting to expose and discuss gathered expertise as well as state of the art research around SoC related topics through plenary invited papers and posters. The workshop aims to provide a prospective view of tomorrow\u27s challenges in the multibillion transistor era, taking into account the emerging techniques and architectures exploring the synergy between flexible on-chip communication and system reconfigurability

High-speed Analog-to-digital Converters For Modern Satellite Receivers: Design Verification Test And Sensitivity Analysis

Mixed-signal System-on-chip devices such as analog-to-digital converters (ADCs) have become increasingly prevalent in the semiconductor industry. Since the complexity and applications are different for each device, complex testing and characterization methods are required. Specifically, signal integrity in I/O interfaces requires that standard RF design and test techniques must be integrated into mixed signal processes. While such techniques may be difficult to implement, on-chip test-vehicles and RF circuitry offer the possibility of wireless approaches to chip testing. This would eliminate expensive wafer probing solution to verify the design of high-speed ADC functionality currently required for high-speed product evaluation. This thesis describes a new high-speed analog-to-digital converter test methodology. The target systems used on-chip digital de-multiplexing and clock distribution. A detail sequence of performance testing operations is presented. Digital outputs are post processed and fed into a computer-aided ADC performance characterization tool which is custom-developed in a MATLAB GUI. The problems of high sampling rate ADC testing are described. The test methodologies described reduce test costs and overcome many test hardware limitations. As our focus is on satellite receiver systems, we emphasize the measurement of inter-modulation distortion and effective resolution bandwidth. As a primary characterization component, Fourier analysis is used and we address the issue of sample window adjustment to eliminate spectral leakage and false spur generation. A 6-bit 800 MSamples/sec dual channel SiGe-based ADC is used as a target example and investigated on the corner lot process variations to determine the impact of process variations and the sensitivity of the ADCs to critical process parameter variations

NASA SBIR abstracts of 1991 phase 1 projects

The objectives of 301 projects placed under contract by the Small Business Innovation Research (SBIR) program of the National Aeronautics and Space Administration (NASA) are described. These projects were selected competitively from among proposals submitted to NASA in response to the 1991 SBIR Program Solicitation. The basic document consists of edited, non-proprietary abstracts of the winning proposals submitted by small businesses. The abstracts are presented under the 15 technical topics within which Phase 1 proposals were solicited. Each project was assigned a sequential identifying number from 001 to 301, in order of its appearance in the body of the report. Appendixes to provide additional information about the SBIR program and permit cross-reference of the 1991 Phase 1 projects by company name, location by state, principal investigator, NASA Field Center responsible for management of each project, and NASA contract number are included

Design and performance optimization of asynchronous networks-on-chip

As digital systems continue to grow in complexity, the design of conventional synchronous systems is facing unprecedented challenges. The number of transistors on individual chips is already in the multi-billion range, and a greatly increasing number of components are being integrated onto a single chip. As a consequence, modern digital designs are under strong time-to-market pressure, and there is a critical need for composable design approaches for large complex systems. In the past two decades, networks-on-chip (NoC’s) have been a highly active research area. In a NoC-based system, functional blocks are first designed individually and may run at different clock rates. These modules are then connected through a structured network for on-chip global communication. However, due to the rigidity of centrally-clocked NoC’s, there have been bottlenecks of system scalability, energy and performance, which cannot be easily solved with synchronous approaches. As a result, there has been significant recent interest in combing the notion of asynchrony with NoC designs. Since the NoC approach inherently separates the communication infrastructure, and its timing, from computational elements, it is a natural match for an asynchronous paradigm. Asynchronous NoC’s, therefore, enable a modular and extensible system composition for an ‘object-orient’ design style. The thesis aims to significantly advance the state-of-art and viability of asynchronous and globally-asynchronous locally-synchronous (GALS) networks-on-chip, to enable high-performance and low-energy systems. The proposed asynchronous NoC’s are nearly entirely based on standard cells, which eases their integration into industrial design flows. The contributions are instantiated in three different directions. First, practical acceleration techniques are proposed for optimizing the system latency, in order to break through the latency bottleneck in the memory interfaces of many on-chip parallel processors. Novel asynchronous network protocols are proposed, along with concrete NoC designs. A new concept, called ‘monitoring network’, is introduced. Monitoring networks are lightweight shadow networks used for fast-forwarding anticipated traffic information, ahead of the actual packet traffic. The routers are therefore allowed to initiate and perform arbitration and channel allocation in advance. The technique is successfully applied to two topologies which belong to two different categories – a variant mesh-of-trees (MoT) structure and a 2D-mesh topology. Considerable and stable latency improvements are observed across a wide range of traffic patterns, along with moderate throughput gains. Second, for the first time, a high-performance and low-power asynchronous NoC router is compared directly to a leading commercial synchronous counterpart in an advanced industrial technology. The asynchronous router design shows significant performance improvements, as well as area and power savings. The proposed asynchronous router integrates several advanced techniques, including a low-latency circular FIFO for buffer design, and a novel end-to-end credit-based virtual channel (VC) flow control. In addition, a semi-automated design flow is created, which uses portions of a standard synchronous tool flow. Finally, a high-performance multi-resource asynchronous arbiter design is developed. This small but important component can be directly used in existing asynchronous NoC’s for performance optimization. In addition, this standalone design promises use in opening up new NoC directions, as well as for general use in parallel systems. In the proposed arbiter design, the allocation of a resource to a client is divided into several steps. Multiple successive client-resource pairs can be selected rapidly in pipelined sequence, and the completion of the assignments can overlap in parallel. In sum, the thesis provides a set of advanced design solutions for performance optimization of asynchronous and GALS networks-on-chip. These solutions are at different levels, from network protocols, down to router- and component-level optimizations, which can be directly applied to existing basic asynchronous NoC designs to provide a leap in performance improvement

Efficient Design and Communication for 3D Stacked Dynamic Memory

As computer memory increases in size and processors continue to get faster, memory becomes an increasing bottleneck to system performance. To mitigate the slow DRAM memory chip speeds, a new generation of 3D stacked DRAM will allow lower power consumption and higher bandwidth. To communicate between these chips, this paper proposes the use of ring based standing wave oscillators for fast data transfer. With a fast clocking scheme, multiple channels can share the same bus to reduce TSVs and maintain similar memory latencies. Simulations with the new clocking scheme and data transfers are performed to show the improvements that can be made in memory communication. Experimental results show that a ring based clocking scheme can obtain two times the speed up of current stacked memory chips. Variations of this clocking scheme can also provide half the power consumption with comparable speeds. These ring-based architectures allow higher memory speeds without compromising the complexity of the hardware. This allows the ring-based memory architecture to trade off power, throughput, and latency to improve system performance for different applications

A Direct Sequence Code-Division Multiple-Access Local Area Network Model

The United States Air Force relies heavily on computer networks for every-day operations. The medium access control (MAC) protocol currently used by most local area (LAN) permits a single station to access the network at a time (e.g. CSMA/CD or Ethernet). This limits network throughput to, at most, the maximum transmission rate of a single node with overhead neglected. Significant delays are observed when a LAN is overloaded by multiple users attempting to access the common medium. In CSMA/CD, collisions are detected and the data sent by the nodes involved are delayed and transmitted at a later time. The retransmission time is determined with a binary exponential back-off-algorithm. Code Division Multiple Access (CDMA) is a technique that increases channel capacity by allowing multiple signals to occupy the same bandwidth simultaneously. Each signal is spread through multiplication with a unique pseudo-random code that distinguishes it from all other signals. Upon reception, the signal of interest is despread and separated from other incoming signals by multiplying it with the same exact code. With this technique, it is possible for multiple stations to transmit simultaneously with minimal ill effects. A simulation model is developed for a direct sequence spread spectrum CDMA (DS/CDMA) channel that incorporates the effects of multiple access interferers (MAI) having spreading codes from the same or different code families. The model introduces cross-correlation coefficients to calculate the signal-to-interference ratio and determine channel bit error performance. Transmission media attenuation and the near-far effects are accounted for in the model design. The model utility is demonstrated by determining the loss characteristics of a coaxial spread spectrum network. Due to the modular design, other transmission media characteristic can be easily incorporated. A bus network topology is simulated using 10Base2 coaxial cable. The model is compared and validated against a spread spectrum local area network hardware test bed