701 research outputs found
Fast Sensing and Adaptive Actuation for Robust Legged Locomotion
Robust legged locomotion in complex terrain demands fast perturbation detection and reaction. In animals, due to the neural transmission delays, the high-level control loop involving the brain is absent from mitigating the initial disturbance. Instead, the low-level compliant behavior embedded in mechanics and the mid-level controllers in the spinal cord are believed to provide quick response during fast locomotion. Still, it remains unclear how these low- and mid-level components facilitate robust locomotion.
This thesis aims to identify and characterize the underlining elements responsible for fast sensing and actuation. To test individual elements and their interplay, several robotic systems were implemented. The implementations include active and passive mechanisms as a combination of elasticities and dampers in multi-segment robot legs, central pattern generators inspired by intraspinal controllers, and a synthetic robotic version of an intraspinal sensor.
The first contribution establishes the notion of effective damping. Effective damping is defined as the total energy dissipation during one step, which allows quantifying how much ground perturbation is mitigated. Using this framework, the optimal damper is identified as viscous and tunable. This study paves the way for integrating effective dampers to legged designs for robust locomotion.
The second contribution introduces a novel series elastic actuation system. The proposed system tackles the issue of power transmission over multiple joints, while featuring intrinsic series elasticity. The design is tested on a hopper with two more elastic elements, demonstrating energy recuperation and enhanced dynamic performance.
The third contribution proposes a novel tunable damper and reveals its influence on legged hopping. A bio-inspired slack tendon mechanism is implemented in parallel with a spring. The tunable damping is rigorously quantified on a central-pattern-generator-driven hopping robot, which reveals the trade-off between locomotion robustness and efficiency.
The last contribution explores the intraspinal sensing hypothesis of birds. We speculate that the observed intraspinal structure functions as an accelerometer. This accelerometer could provide fast state feedback directly to the adjacent central pattern generator circuits, contributing to birds’ running robustness. A biophysical simulation framework is established, which provides new perspectives on the sensing mechanics of the system, including the influence of morphologies and material properties.
Giving an overview of the hierarchical control architecture, this thesis investigates the fast sensing and actuation mechanisms in several control layers, including the low-level mechanical response and the mid-level intraspinal controllers. The contributions of this work provide new insight into animal loco-motion robustness and lays the foundation for future legged robot design
Characterisation and State Estimation of Magnetic Soft Continuum Robots
Minimally invasive surgery has become more popular as it leads to less bleeding, scarring, pain, and shorter recovery time. However, this has come with counter-intuitive devices and steep surgeon learning curves. Magnetically actuated Soft Continuum Robots (SCR) have the potential to replace these devices, providing high dexterity together with the ability to conform to complex environments and safe human interactions without the cognitive burden for the clinician. Despite considerable progress in the past decade in their development, several challenges still plague SCR hindering their full realisation. This thesis aims at improving magnetically actuated SCR by addressing some of these challenges, such as material characterisation and modelling, and sensing feedback and localisation.
Material characterisation for SCR is essential for understanding their behaviour and designing effective modelling and simulation strategies. In this work, the material properties of commonly employed materials in magnetically actuated SCR, such as elastic modulus, hyper-elastic model parameters, and magnetic moment were determined. Additionally, the effect these parameters have on modelling and simulating these devices was investigated.
Due to the nature of magnetic actuation, localisation is of utmost importance to ensure accurate control and delivery of functionality. As such, two localisation strategies for magnetically actuated SCR were developed, one capable of estimating the full 6 degrees of freedom (DOFs) pose without any prior pose information, and another capable of accurately tracking the full 6-DOFs in real-time with positional errors lower than 4~mm. These will contribute to the development of autonomous navigation and closed-loop control of magnetically actuated SCR
Engineering for a changing world: 60th Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 04-08, 2023 : programme
In 2023, the Ilmenau Scientific Colloquium is once more organised by the Department of Mechanical Engineering. The title of this year’s conference “Engineering for a Changing World” refers to limited natural resources of our planet, to massive changes in cooperation between continents, countries, institutions and people – enabled by the increased implementation of information technology as the probably most dominant driver in many fields. The Colloquium, supplemented by workshops, is characterised but not limited to the following topics: – Precision engineering and measurement technology Nanofabrication – Industry 4.0 and digitalisation in mechanical engineering – Mechatronics, biomechatronics and mechanism technology – Systems engineering – Productive teaming - Human-machine collaboration in the production environment The topics are oriented on key strategic aspects of research and teaching in Mechanical Engineering at our university
Surgical Subtask Automation for Intraluminal Procedures using Deep Reinforcement Learning
Intraluminal procedures have opened up a new sub-field of minimally invasive surgery that use flexible instruments to navigate through complex luminal structures of the body, resulting in reduced invasiveness and improved patient benefits. One of the major challenges in this field is the accurate and precise control of the instrument inside the human body. Robotics has emerged as a promising solution to this problem. However, to achieve successful robotic intraluminal interventions, the control of the instrument needs to be automated to a large extent. The thesis first examines the state-of-the-art in intraluminal surgical robotics and identifies the key challenges in this field, which include the need for safe and effective tool manipulation, and the ability to adapt to unexpected changes in the luminal environment. To address these challenges, the thesis proposes several levels of autonomy that enable the robotic system to perform individual subtasks autonomously, while still allowing the surgeon to retain overall control of the procedure. The approach facilitates the development of specialized algorithms such as Deep Reinforcement Learning (DRL) for subtasks like navigation and tissue manipulation to produce robust surgical gestures. Additionally, the thesis proposes a safety framework that provides formal guarantees to prevent risky actions. The presented approaches are evaluated through a series of experiments using simulation and robotic platforms. The experiments demonstrate that subtask automation can improve the accuracy and efficiency of tool positioning and tissue manipulation, while also reducing the cognitive load on the surgeon. The results of this research have the potential to improve the reliability and safety of intraluminal surgical interventions, ultimately leading to better outcomes for patients and surgeons
2023-2024 Boise State University Undergraduate Catalog
This catalog is primarily for and directed at students. However, it serves many audiences, such as high school counselors, academic advisors, and the public. In this catalog you will find an overview of Boise State University and information on admission, registration, grades, tuition and fees, financial aid, housing, student services, and other important policies and procedures. However, most of this catalog is devoted to describing the various programs and courses offered at Boise State
Mouldable Solids: Exploring Organisational Grid Strategies to Enhance Mud Architecture
Mud is a material with deep origins in human ecology and vernacular architecture. Despite housing one-third of the world’s population and almost half in developing countries, the application of mud as a building material has diminished over the years, perhaps due to a worldwide application of industrialised building materials and practices, as well as the perception of mud as a primitive material. On the contrary, mud is cheap, reusable and sustainable yet critical challenges relate to material behaviour and performance. The researcher takes the standpoint that mud architecture is a material practice and explores organisational grids consisting of skin and skeleton to enhance structural performance.
Three areas of interest combine to demonstrate how mud as a material operates in a contemporary context: (1) The Natural Philosophy of Aristotle and ibn Sina to understand the transitional state of matter and force-form relations; (2) Isaac Newton’s Laws of Motion and Hooke’s Law to understand force-displacement relationships; (3) Information theory to represent parameters and conditions as information in organisational strategies. While mud is of interest, other materials explored include plastic, concrete, clay, and adobe as they categorise as mouldable solids due to their transitional states. Where a careful focus on mud regarding material, form, motion and force, the research deploys the technical with the philosophical to negotiate the capacities of this particular mouldable solid. The hypothesis is that the greater the variance in the skin and skeleton grid, the better the resilience and adaptability a body has due to the complex interconnections between the parts that make up a whole, organising and re-organising to withstand forces.
The dissertation celebrates mud as a reconfigurable architectural material rather than static and outdated, allowing for a multi-approach solution to contemporary and standardised materials in the current industrialised context
Applied Mathematics to Mechanisms and Machines
This book brings together all 16 articles published in the Special Issue "Applied Mathematics to Mechanisms and Machines" of the MDPI Mathematics journal, in the section “Engineering Mathematics”. The subject matter covered by these works is varied, but they all have mechanisms as the object of study and mathematics as the basis of the methodology used. In fact, the synthesis, design and optimization of mechanisms, robotics, automotives, maintenance 4.0, machine vibrations, control, biomechanics and medical devices are among the topics covered in this book. This volume may be of interest to all who work in the field of mechanism and machine science and we hope that it will contribute to the development of both mechanical engineering and applied mathematics
Design, modeling and implementation of a soft robotic neck for humanoid robots
Mención Internacional en el título de doctorSoft humanoid robotics is an emerging field that combines the flexibility and safety of soft
robotics with the form and functionality of humanoid robotics. This thesis explores the potential
for collaboration between these two fields with a focus on the development of soft joints for the
humanoid robot TEO. The aim is to improve the robot’s adaptability and movement, which are
essential for an efficient interaction with its environment.
The research described in this thesis involves the development of a simple and easily transportable
soft robotic neck for the robot, based on a 2 Degree of Freedom (DOF) Cable Driven
Parallel Mechanism (CDPM). For its final integration into TEO, the proposed design is later
refined, resulting in an efficiently scaled prototype able to face significant payloads.
The nonlinear behaviour of the joints, due mainly to the elastic nature of their soft links,
makes their modeling a challenging issue, which is addressed in this thesis from two perspectives:
first, the direct and inverse kinematic models of the soft joints are analytically studied,
based on CDPM mathematical models; second, a data-driven system identification is performed
based on machine learning techniques. Both approaches are deeply studied and compared, both
in simulation and experimentally.
In addition to the soft neck, this thesis also addresses the design and prototyping of a soft
arm capable of handling external loads. The proposed design is also tendon-driven and has a
morphology with two main bending configurations, which provides more versatility compared
to the soft neck.
In summary, this work contributes to the growing field of soft humanoid robotics through
the development of soft joints and their application to the humanoid robot TEO, showcasing the
potential of soft robotics to improve the adaptability, flexibility, and safety of humanoid robots.
The development of these soft joints is a significant achievement and the research presented in this thesis paves the way for further exploration and development in this field.La robótica humanoide blanda es un campo emergente que combina la flexibilidad y seguridad
de la robótica blanda con la forma y funcionalidad de la robótica humanoide. Esta
tesis explora el potencial de colaboración entre estos dos campos centrándose en el desarrollo
de una articulación blanda para el cuello del robot humanoide TEO. El objetivo es mejorar la
adaptabilidad y el movimiento del robot, esenciales para una interacción eficaz con su entorno.
La investigación descrita en esta tesis consiste en el desarrollo de un prototipo sencillo
y fácilmente transportable de cuello blando para el robot, basado en un mecanismo paralelo
actuado por cable de 2 grados de libertad. Para su integración final en TEO, el diseño propuesto
es posteriormente refinado, resultando en un prototipo eficientemente escalado capaz de manejar
cargas significativas.
El comportamiemto no lineal de estas articulaciones, debido fundamentalmente a la naturaleza
elástica de sus eslabones blandos, hacen de su modelado un gran reto, que en esta tesis
se aborda desde dos perspectivas diferentes: primero, los modelos cinemáticos directo e inverso
de las articulaciones blandas se estudian analíticamente, basándose en modelos matemáticos de
mecanismos paralelos actuados por cable; segundo, se aborda el problema de la identificación
del sistema mediante técnicas basadas en machine learning. Ambas propuestas se estudian y
comparan en profundidad, tanto en simulación como experimentalmente.
Además del cuello blando, esta tesis también aborda el diseño de un brazo robótico blando
capaz de manejar cargas externas. El diseño propuesto está igualmente basado en accionamiento
por tendones y tiene una morfología con dos configuraciones principales de flexión, lo que
proporciona una mayor versatilidad en comparación con el cuello robótico blando.
En resumen, este trabajo contribuye al creciente campo de la robótica humanoide blanda
mediante el desarrollo de articulaciones blandas y su aplicación al robot humanoide TEO, mostrando el potencial de la robótica blanda para mejorar la adaptabilidad, flexibilidad y seguridad
de los robots humanoides. El desarrollo de estas articulaciones es una contribución
significativa y la investigación presentada en esta tesis allana el camino hacia nuevos desarrollos
y retos en este campo.Programa de Doctorado en Ingeniería Eléctrica, Electrónica y Automática por la Universidad Carlos III de MadridPresidenta: Cecilia Elisabet García Cena.- Secretario: Dorin Sabin Copaci.- Vocal: Martin Fodstad Stole
- …