Unipolar and bipolar fatigue in antiferroelectric lead zirconate thin films and evidences for switching-induced charge injection inducing fatigue

For the first time, we show that unipolar fatigue does occur in antiferroelectric capacitors, confirming the predictions of a previous work [Appl. Phys. Lett., 94, 072901 (2009)]. We also show that unipolar fatigue in antiferroelectrics is less severe than bipolar fatigue if the driving field is of the same magnitude. This phenomenon has been attributed to the switching-induced charge injection, the main cause for polarization fatigue in ferroelectric and antiferroelectric materials. Other evidences for polarization fatigue caused by the switching-induced charge injection from the nearby electrode rather than the charge injection during stable/quasi-stable leakage current stage are also discussed.Comment: 10 pages and 2 figure

Low noise charge injection in the CCD22

The inclusion of a charge injection structure on a charge coupled device (CCD) allows for the mitigation of charge transfer loss which can be caused by radiation induced charge trapping defects. Any traps present in the pixels of the CCD are filled by the injected charge as it is swept through the device and consequently, the charge transfer efficiency is improved in subsequently acquired images. To date, a number of different types of CCD have been manufactured featuring a variety of charge injection techniques. The e2v Technologies CCD22, used in the EPIC MOS focal plane instruments of XMM-Newton, is one such device and is the subject of this paper. A detailed understanding of charge injection operation and the use of charge injection to mitigate charge transfer losses resulting from radiation damage to CCDs will benefit a number of space projects planned for the future, including the ESA GAIA and X-ray Evolving Universe Spectrometry (XEUS) missions.The charge injection structure and mode of operation of the CCD22 are presented, followed by a detailed analysis of the uniformity and repeatability of the charge injection amplitude across the columns of the device. The effects of proton irradiation on the charge injection characteristics are also presented, in particular the effect of radiation induced bright pixels on the injected charge level

Charge injection instability in perfect insulators

We show that in a macroscopic perfect insulator, charge injection at a field-enhancing defect is associated with an instability of the insulating state or with bistability of the insulating and the charged state. The effect of a nonlinear carrier mobility is emphasized. The formation of the charged state is governed by two different processes with clearly separated time scales. First, due to a fast growth of a charge-injection mode, a localized charge cloud forms near the injecting defect (or contact). Charge injection stops when the field enhancement is screened below criticality. Secondly, the charge slowly redistributes in the bulk. The linear instability mechanism and the final charged steady state are discussed for a simple model and for cylindrical and spherical geometries. The theory explains an experimentally observed increase of the critical electric field with decreasing size of the injecting contact. Numerical results are presented for dc and ac biased insulators.Comment: Revtex, 7pages, 4 ps figure

A new approach to understanding the frequency response of mineral oil

Dielectric spectroscopy is non-invasive diagnostic method and can give information about dipole relaxation, electrical conduction and structure of molecules. Since the creation of charge carriers in mineral oil is not only from dissociation but also injection from electrodes, the injection current cannot be simply ignored. The polarization caused by the charge injection has been studied in this paper. Based on our research, if the mobility of the injected charge carriers is fast enough so that they can reach the opposite electrode, the current caused by the injection will contribute only to the imaginary part of the complex permittivity and this part of the complex permittivity will decrease with the frequency with a slope of -1 which is in a good agreement with the experimental result. The classic ionic drift and diffusion model and this injection model will be combined to make an improved model. In this paper, the frequency responses of three different kinds of mineral oils have been measured, and this modified model has been used to simulate the experiment result. Since there is only one unknown parameter in this improved model, a better understanding of the frequency response in mineral oil can be achieve

Controlling charge injection in organic field-effect transistors using self-assembled monolayers

We have studied charge injection across the metal/organic semiconductor interface in bottom-contact poly(3-hexylthiophene) (P3HT) field-effect transistors, with Au source and drain electrodes modified by self-assembled monolayers (SAMs) prior to active polymer deposition. By using the SAM to engineer the effective Au work function, we markedly affect the charge injection process. We systematically examine the contact resistivity and intrinsic channel mobility, and show that chemically increasing the injecting electrode work function significantly improves hole injection relative to untreated Au electrodes.Comment: 5 pages, 2 figures. Supplementary information available upon reques

Charge carrier injection into insulating media: single-particle versus mean-field approach

Self-consistent, mean-field description of charge injection into a dielectric medium is modified to account for discreteness of charge carriers. The improved scheme includes both the Schottky barrier lowering due to the individual image charge and the barrier change due to the field penetration into the injecting electrode that ensures validity of the model at both high and low injection rates including the barrier dominated and the space-charge dominated regimes. Comparison of the theory with experiment on an unipolar ITO/PPV/Au-device is presented.Comment: 32 pages, 9 figures; revised version accepted to PR

A Josephson junction as a detector of Poissonian charge injection

We propose a scheme of measuring the non-Gaussian character of noise by a hysteretic Josephson junction in the macroscopic quantum tunnelling (MQT) regime. We model the detector as an (under)damped $LC$ resonator. It transforms Poissonian charge injection into current through the detector, which samples the injection statistics over a floating time window of length $\sim Q/\omega _{\rm J}$, where $Q$ is the quality factor of the resonator and $\omega_{\rm J}$ its resonance frequency. This scheme ought to reveal the Poisson character of charge injection in a detector with realistic parameters

Recent developments in CID imaging

Readout of CID imaging arrays was first performed by injecting and detecting the signal charge from each sensing site in sequence. A new readout method, termed parallel injection, has been developed in which the functions of signal charge detection and injection have been separated. The level of signal charge at each sensing site is detected during a line scan, and during the line retrace interval, all charge in the selected line is injected. The parallel injection technique is well adapted to TV scan formats in that the signal is read out at high speed, line by line. A 244 line by 248 element TV compatible imager, employing this technique and including an on chip preamplifier, has been constructed and operation demonstrated