4,686 research outputs found
Millimeter-wave backhaul for 5G networks: challenges and solutions
The trend for dense deployment in future 5G mobile communication networks makes current wired backhaul infeasible owing to the high cost. Millimetre-wave (mm-wave) communication, a promising technique with the capability of providing a multi-gigabit transmission rate, offers a flexible and cost-effective candidate for 5G backhauling. By exploiting highly directional antennas, it becomes practical to cope with explosive traffic demands and to deal with interference problems. Several advancements in physical layer technology, such as hybrid beamforming and full duplexing, bring new challenges and opportunities for mm-wave backhaul. This article introduces a design framework for 5G mm-wave backhaul, including routing, spatial reuse scheduling and physical layer techniques. The associated optimization model, open problems and potential solutions are discussed to fully exploit the throughput gain of the backhaul network. Extensive simulations are conducted to verify the potential benefits of the proposed method for the 5G mm-wave backhaul design
A Comprehensive Investigation of Beam Management Through Conventional and Deep Learning Approach
5G spectrum uses cutting-edge technology which delivers high data rates, low latency, increased capacity, and high spectrum utilization. To cater to these requirements various technologies are available such as Multiple Access Technology (MAT), Multiple Input Multiple Output technology (MIMO), Millimetre (mm) wave technology, Non-Orthogonal Multiple Access Technology (NOMA), Simultaneous Wireless Information and Power Transfer (SWIPT). Of all available technologies, mmWave is prominent as it provides favorable opportunities for 5G. Millimeter-wave is capable of providing a high data rate i.e., 10 Gbit/sec. Also, a tremendous amount of raw bandwidth is available i.e., around 250 GHz, which is an attractive characteristic of the mmWave band to relieve mobile data traffic congestion in the low frequency band. It has a high frequency i.e., 30 – 300 GHz, giving very high speed. It has a very short wavelength i.e., 1-10mm, because of this it provides the compact size of the component. It will provide a throughput of up to 20 Gbps. It has narrow beams and will increase security and reduce interference. When the main beam of the transmitter and receiver are not aligned properly there is a problem in ideal communication. To solve this problem beam management is one of the solutions to form a strong communication link between transmitter and receiver. This paper aims to address challenges in beam management and proposes a framework for realization. Towards the same, the paper initially introduces various challenges in beam management. Towards building an effective beam management system when a user is moving, various steps are present like beam selection, beam tracking, beam alignment, and beam forming. Hence the subsequent sections of the paper illustrate various beam management procedures in mmWave using conventional methods as well as using deep learning techniques. The paper also presents a case study on the framework's implementation using the above-mentioned techniques in mmWave communication. Also glimpses on future research directions are detailed in the final sections. Such beam management techniques when used for mmWave technology will enable build fast, efficient, and capable 5G networks
Control-data separation architecture for cellular radio access networks: a survey and outlook
Conventional cellular systems are designed to ensure ubiquitous coverage with an always present wireless channel irrespective of the spatial and temporal demand of service. This approach raises several problems due to the tight coupling between network and data access points, as well as the paradigm shift towards data-oriented services, heterogeneous deployments and network densification. A logical separation between control and data planes is seen as a promising solution that could overcome these issues, by providing data services under the umbrella of a coverage layer. This article presents a holistic survey of existing literature on the control-data separation architecture (CDSA) for cellular radio access networks. As a starting point, we discuss the fundamentals, concepts, and general structure of the CDSA. Then, we point out limitations of the conventional architecture in futuristic deployment scenarios. In addition, we present and critically discuss the work that has been done to investigate potential benefits of the CDSA, as well as its technical challenges and enabling technologies. Finally, an overview of standardisation proposals related to this research vision is provided
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
CogCell: Cognitive Interplay between 60GHz Picocells and 2.4/5GHz Hotspots in the 5G Era
Rapid proliferation of wireless communication devices and the emergence of a
variety of new applications have triggered investigations into next-generation
mobile broadband systems, i.e., 5G. Legacy 2G--4G systems covering large areas
were envisioned to serve both indoor and outdoor environments. However, in the
5G-era, 80\% of overall traffic is expected to be generated in indoors. Hence,
the current approach of macro-cell mobile network, where there is no
differentiation between indoors and outdoors, needs to be reconsidered. We
envision 60\,GHz mmWave picocell architecture to support high-speed indoor and
hotspot communications. We envisage the 5G indoor network as a combination of-,
and interplay between, 2.4/5\,GHz having robust coverage and 60\,GHz links
offering high datarate. This requires an intelligent coordination and
cooperation. We propose 60\,GHz picocellular network architecture, called
CogCell, leveraging the ubiquitous WiFi. We propose to use 60\,GHz for the data
plane and 2.4/5GHz for the control plane. The hybrid network architecture
considers an opportunistic fall-back to 2.4/5\,GHz in case of poor connectivity
in the 60\,GHz domain. Further, to avoid the frequent re-beamforming in 60\,GHz
directional links due to mobility, we propose a cognitive module -- a
sensor-assisted intelligent beam switching procedure -- which reduces the
communication overhead. We believe that the CogCell concept will help future
indoor communications and possibly outdoor hotspots, where mobile stations and
access points collaborate with each other to improve the user experience.Comment: 14 PAGES in IEEE Communications Magazine, Special issue on Emerging
Applications, Services and Engineering for Cognitive Cellular Systems
(EASE4CCS), July 201
- …