Tribological properties of structural ceramics

The tribological and lubricated behavior of both oxide and nonoxide ceramics are reviewed in this chapter. Ceramics are examined in contact with themselves, other harder materials and metals. Elastic, plastic and fracture behavior of ceramics in solid state contact is discussed. The contact load necessary to initiate fracture in ceramics is shown to be appreciably reduced with tangential motion. Both friction and wear of ceramics are anisotropic and relate to crystal structure as has been observed with metals. Grit size effects in two and three body abrasive wear are observed for ceramics. Both free energy of oxide formation and the d valence bond character of metals are related to the friction and wear characteristics for metals in contact with ceramics. Surface contaminants affect friction and adhesive wear. For example, carbon on silicon carbide and chlorine on aluminum oxide reduce friction while oxygen on metal surfaces in contact with ceramics increases friction. Lubrication increases the critical load necessary to initiate fracture of ceramics both in indentation and with sliding or rubbing. Ceramics compositions both as coatings and in composites are described for the high temperature lubrication of both alloys and ceramics

Adsorption and release of BMP-2 on nanocrystalline apatite-coated and uncoated hydroxyapatite/b-tricalcium phosphate porous ceramics

The association of bone morphogenetic proteins (BMPs) with calcium phosphate bioceramics is known to confer them osteoinductive properties. The aim of this study was to evaluate the surface properties, especially regarding recombinant human BMP-2 (rhBMP-2) adsorption and release, of commercial sintered biphasic calcium phosphate ceramics after coating with biomimetic nanocrystalline apatite. The raw and coated ceramics exhibited similar macroporous structures but different nanometer-sized pores contents. Both types of ceramics showed Langmuir-type adsorption isotherms of rhBMP-2. The coating noticeably increased the rate of adsorption and the total amount of growth factor taken up, but the maximum coverage per surface area unit as well as the affinity constant appeared lower for coated ceramics compared with raw ceramic surfaces. The limited advantage gained by coating the ceramics can be assigned to a lower accessibility of the surface adsorption sites compared with the raw ceramics. The quantity of rhBMP-2 spontaneously released in cell culture medium during the first weeks was lower for coated samples than for uncoated ceramics and represented a minor fraction of the total adsorbed amount. In conclusion, the nanocrystalline apatite coating was found to favor the adsorption of rhBMP-2 while providing a mean to fine tune the release of the growth factor

Improved method for producing metal-reinforced ceramics

Vacuum impregnation process produces metal-reinforced ceramics with only 3 percent void space volumes. Method may be used to produce metal-reinforced ceramics for high temperature or structural applications such as furnace supports and armor

Ultrafast laser welding of ceramics.

Welding of ceramics is a key missing component in modern manufacturing. Current methods cannot join ceramics in proximity to temperature-sensitive materials like polymers and electronic components. We introduce an ultrafast pulsed laser welding approach that relies on focusing light on interfaces to ensure an optical interaction volume in ceramics to stimulate nonlinear absorption processes, causing localized melting rather than ablation. The key is the interplay between linear and nonlinear optical properties and laser energy-material coupling. The welded ceramic assemblies hold high vacuum and have shear strengths comparable to metal-to-ceramic diffusion bonds. Laser welding can make ceramics integral components in devices for harsh environments as well as in optoelectronic and/or electronic packages needing visible-radio frequency transparency

Brittleness of ceramics

The main characteristics of mechanical properties of ceramics are summarized and the causes of their brittleness, especially the limited mobility of dislocations, are discussed. The possibility of improving the fracture toughness of ceramics and the basic research needs relating to technology, structure and mechanical properties of ceramics are stressed in connection with their possible applications in engineering at high temperature

An attempt to obtain Bi_{4}Ti_{3}O_{12}-PVC textured ceramics-polymer composites

Bi_{4}Ti_{3}O_{12}-PVC composites were fabricated. Ceramics powders of bismuth titanate were prepared by the sol-gel method using bismuth nitrate pentahydrate Bi(NO_{3})_{3} \cdot 5H_{2}O and tetrabutyl titanate Ti(CH_{3}(CH_{2})_{3}O)_{4} as precursors. The Bi_{4}Ti_{3}O_{12}-PVC composites were fabricated from ceramics powders and polymer powders by hot-pressing method.Comment: 4 pages, 4 figure

Ritual and setting

My research has for many years been concerned with ceremonial objects, the spaces they occupy and other associated elements (music, ritual, contemplation). Ritual and Setting allowed me to enter a wider debate, on the perception of ceramics as an art form. My aim was to examine the emotive relationship between an object and its location; also to acknowledge my own cultural heritage and to investigate how my Far Eastern approach to ceramics might sit alongside a Western architectural tradition. Ritual and Setting explores the reflective and sacramental notions of large-scale porcelain and their effect on celebrants and visitors. On a technical level the project advanced the development of surface treatments on large-scale ceramic forms in a manner not seen in contemporary ceramics in the setting of a sacred space. This placement of individual pieces around the Cathedral in a more speculative distribution departs from the more conventional approaches of ceramic artists such as de Staebler and Mongrain to insert single works in a site with prayerful intentions (e.g. the Altar) or to produce a whole body of furniture, or, as in the Matisse chapel at Vence, an entire decorative scheme. Winchester, like many cathedrals, has a long tradition of exhibiting art, but has never systematically presented contemporary craft. Ritual and Setting tested new ground for the cathedral. The event led to the hosting of a touring exhibition of ceramics by Julian Stair (2013). I intend Ritual and Setting to provide forthcoming generations with the idea that craft makers can initiate and complete exhibitions and projects outside the established arenas of galleries and shops. Traditional attitudes have hampered the opening up of ceramics as an art form. By recontextualising this work from 'historical pottery' to a public architectural setting, the project serves to re-present ceramics in a new light

Clinical application of ceramics in anterior cervical discectomy and fusion: A review and update

Study Design: Narrative review. Objectives: Anterior cervical discectomy and fusion (ACDF) is a reliable procedure, commonly used for cervical degenerative disc disease. For interbody fusions, autograft was the gold standard for decades; however, limited availability and donor site morbidities have led to a constant search for new materials. Clinically, it has been shown that calcium phosphate ceramics, including hydroxyapatite (HA) and tricalcium phosphate (TCP), are effective as osteoconductive materials and bone grafts. In this review, we present the current findings regarding the use of ceramics in ACDF. Methods: A review of the relevant literature examining the clinical use of ceramics in anterior cervical discectomy and fusion procedures was conducted using PubMed, OVID and Cochrane. Result: HA, coralline HA, sandwiched HA, TCP, and biphasic calcium phosphate ceramics were used in combination with osteoinductive materials such as bone marrow aspirate and various cages composed of poly-ether-ether-ketone (PEEK), fiber carbon, and titanium. Stand-alone ceramic spacers have been associated with fracture and cracks. Metallic cages such as titanium endure the risk of subsidence and migration. PEEK cages in combination with ceramics were shown to be a suitable substitute for autograft. Conclusion: None of the discussed options has demonstrated clear superiority over others, although direct comparisons are often difficult due to discrepancies in data collection and study methodologies. Future randomized clinical trials are warranted before definitive conclusions can be drawn. © The Author(s) 2017

Effect of sintering temperature and heat treatment on electrical properties of indium oxide based ceramics

Indium oxide based ceramics with bismuth oxide addition were sintered in air in the temperature range 800-1300 ºC. Current-voltage characteristics of In2O3-Bi2O3 ceramics sintered at different temperatures are weakly nonlinear. After an additional heat treatment in air at about 200 ºC samples sintered at a temperature within the narrow range of about 1050-1100 ºC exhibit a current-limiting effect accompanied by low-frequency current oscillations. It is shown that the observed electrical properties are controlled by the grain-boundary barriers and the heat treatment in air at 200 ºC leads to the decrease in the barrier height. Electrical measurements, scanning electron microscopy and X-ray photoelectron spectroscopy results suggest that the current-limiting effect observed in In2O3-Bi2O3 can be explained in terms of the modified barrier model proposed earlier for the explanation of similar effect in In2O3-SrO ceramics