Resource Sharing via Planed Relay for HWN

We present an improved version of adaptive distributed cross-layer routing algorithm (ADCR) for hybrid wireless network with dedicated relay stations () in this paper. A mobile terminal (MT) may borrow radio resources that are available thousands mile away via secure multihop RNs, where RNs are placed at pre-engineered locations in the network. In rural places such as mountain areas, an MT may also communicate with the core network, when intermediate MTs act as relay node with mobility. To address cross-layer network layers routing issues, the cascaded ADCR establishes routing paths across MTs, RNs, and cellular base stations (BSs) and provides appropriate quality of service (QoS). We verify the routing performance benefits of over other networks by intensive simulation

HWN* Mobility Management Considering QoS, Optimisation and Cross Layer Issues

In this paper, we address mobility management for 4th generation heterogeneous networks from a quality of service (QoS), optimisation and cross layer design perspective. Users are classified as high profile, normal profile and low profile according to their differentiated service requirements. Congestion avoidance control and adaptive handover mechanisms are implemented for efficient cooperation within the mobile heterogeneous network environment consisting of a TDMA network, ad hoc network and relay nodes. A previous proposed routing algorithm is also revised to include mobility management

A fast and reliable broadcast service for LTE-advanced exploiting multihop device-to-device transmissions

Several applications, from the Internet of Things for smart cities to those for vehicular networks, need fast and reliable proximity-based broadcast communications, i.e., the ability to reach all peers in a geographical neighborhood around the originator of a message, as well as ubiquitous connectivity. In this paper, we point out the inherent limitations of the LTE (Long-Term Evolution) cellular network, which make it difficult, if possible at all, to engineer such a service using traditional infrastructure-based communications. We argue, instead, that network-controlled device-to-device (D2D) communications, relayed in a multihop fashion, can efficiently support this service. To substantiate the above claim, we design a proximity-based broadcast service which exploits multihop D2D. We discuss the relevant issues both at the UE (User Equipment), which has to run applications, and within the network (i.e., at the eNodeBs), where suitable resource allocation schemes have to be enforced. We evaluate the performance of a multihop D2D broadcasting using system-level simulations, and demonstrate that it is fast, reliable and economical from a resource consumption standpoint

Tutorial on LTE/LTE-A Cellular Network Dimensioning Using Iterative Statistical Analysis

LTE is the fastest growing cellular technology and is expected to increase its footprint in the coming years, as well as progress toward LTE-A. The race among operators to deliver the expected quality of experience to their users is tight and demands sophisticated skills in network planning. Radio network dimensioning (RND) is an essential step in the process of network planning and has been used as a fast, but indicative, approximation of radio site count. RND is a prerequisite to the lengthy process of thorough planning. Moreover, results from RND are used by players in the industry to estimate preplanning costs of deploying and running a network; thus, RND is, as well, a key tool in cellular business modelling. In this work, we present a tutorial on radio network dimensioning, focused on LTE/LTE-A, using an iterative approach to find a balanced design that mediates among the three design requirements: coverage, capacity, and quality. This approach uses a statistical link budget analysis methodology, which jointly accounts for small and large scale fading in the channel, as well as loading due to traffic demand, in the interference calculation. A complete RND manual is thus presented, which is of key importance to operators deploying or upgrading LTE/LTE-A networks for two reasons. It is purely analytical, hence it enables fast results, a prime factor in the race undertaken. Moreover, it captures essential variables affecting network dimensions and manages conflicting targets to ensure user quality of experience, another major criterion in the competition. The described approach is compared to the traditional RND using a commercial LTE network planning tool. The outcome further dismisses the traditional RND for LTE due to unjustified increase in number of radio sites and related cost, and motivates further research in developing more effective and novel RND procedures

LTE-Advanced radio access enhancements: A survey

Long Term Evolution Advanced (LTE-Advanced) is the next step in LTE evolution and allows operators to improve network performance and service capabilities through smooth deployment of new techniques and technologies. LTE-Advanced uses some new features on top of the existing LTE standards to provide better user experience and higher throughputs. Some of the most significant features introduced in LTE-Advanced are carrier aggregation, enhancements in heterogeneous networks, coordinated multipoint transmission and reception, enhanced multiple input multiple output usage and deployment of relay nodes in the radio network. Mentioned features are mainly aimed to enhance the radio access part of the cellular networks. This survey article presents an overview of the key radio access features and functionalities of the LTE-Advanced radio access network, supported by the simulation results. We also provide a detailed review of the literature together with a very rich list of the references for each of the features. An LTE-Advanced roadmap and the latest updates and trends in LTE markets are also presented

Strategic Location Planning for Broadband Access Networks under Cooperative Transmission

To achieve a cost-effective network deployment, employing state-of-art technical advances provides a practical and effective way to enhance system performance and quality of service provisioning. Cooperative transmission has been recognized as one of the most effective paradigms to achieve higher system performance in terms of lower bit-error rate, higher throughput, larger coverage, more efficient energy utilization, and higher network reliability. This dissertation studies the location planning for the deployment of broadband access networks and explores the great potential of cooperative transmission in the context of single-cell cooperative relaying and multi-cell cooperative transmission, respectively. The placement problem is investigated in two categories of network deployment environment, i.e., an existing wireless access network and a perspective broadband access network, respectively. In an existing wireless access network, to solve some practical problems such as the requirements of capacity enhancement and coverage extension, relay stations (RSs) are introduced in the network architecture. We propose two optimization frameworks with the design objectives of maximizing cell capacity and minimizing number of RSs for deployment, respectively. Mathematical formulations are provided to precisely capture the characteristics of the placement problems. The corresponding solution algorithms are developed to obtain the optimal (or near-optimal) results in polynomial time. Numerical analysis and case studies are conducted to validate the performance benefits due to RS placement and the computation efficiency of the proposed algorithms. To deploy a new metropolitan-area broadband access network, we explore the integration of passive optical network (PON) and wireless cooperative networks (WCN) under the multi-cell cooperative transmission technology. An optimization framework is provided to solve the problem of dimensioning and site planning. The issues of node placement, BS-user association, wireless bandwidth and power breakdown assignment are jointly considered in a single stage to achieve better performance. We also propose a solution to the complex optimization problem based on decomposition and linear approximation. Numerical analysis and case studies are conducted to verify the proposed framework. The results demonstrate the performance gains and economic benefits. Given a set of network parameters, the proposed optimization frameworks and solutions proposed in this dissertation can provide design guidelines for practical network deployment and cost estimations. And the constructed broadband access networks show a more cost-effective deployment by taking advantage of the cooperative transmission technology

5G Radio Access above 6 GHz

Designing and developing a millimetre-wave(mmWave) based mobile Radio Access Technology (RAT) in the 6-100 GHz frequency range is a fundamental component in the standardization of the new 5G radio interface, recently kicked off by 3GPP. Such component, herein called the new mmWave RAT, will not only enable extreme mobile broadband (eMBB) services,but also support UHD/3D streaming, offer immersive applications and ultra-responsive cloud services to provide an outstanding Quality of Experience (QoE) to the mobile users. The main objective of this paper is to develop the network architectural elements and functions that will enable tight integration of mmWave technology into the overall 5G radio access network (RAN). A broad range of topics addressing mobile architecture and network functionalities will be covered-starting with the architectural facets of network slicing, multiconnectivity and cells clustering, to more functional elements of initial access, mobility, radio resource management (RRM) and self-backhauling. The intention of the concepts presented here is to lay foundation for future studies towards the first commercial implementation of the mmWave RAT above 6 GHz.Comment: 7 pages, 5 figure