1,190 research outputs found
Two-Layered Superposition of Broadcast/Multicast and Unicast Signals in Multiuser OFDMA Systems
We study optimal delivery strategies of one common and independent
messages from a source to multiple users in wireless environments. In
particular, two-layered superposition of broadcast/multicast and unicast
signals is considered in a downlink multiuser OFDMA system. In the literature
and industry, the two-layer superposition is often considered as a pragmatic
approach to make a compromise between the simple but suboptimal orthogonal
multiplexing (OM) and the optimal but complex fully-layered non-orthogonal
multiplexing. In this work, we show that only two-layers are necessary to
achieve the maximum sum-rate when the common message has higher priority than
the individual unicast messages, and OM cannot be sum-rate optimal in
general. We develop an algorithm that finds the optimal power allocation over
the two-layers and across the OFDMA radio resources in static channels and a
class of fading channels. Two main use-cases are considered: i) Multicast and
unicast multiplexing when users with uplink capabilities request both
common and independent messages, and ii) broadcast and unicast multiplexing
when the common message targets receive-only devices and users with uplink
capabilities additionally request independent messages. Finally, we develop a
transceiver design for broadcast/multicast and unicast superposition
transmission based on LTE-A-Pro physical layer and show with numerical
evaluations in mobile environments with multipath propagation that the capacity
improvements can be translated into significant practical performance gains
compared to the orthogonal schemes in the 3GPP specifications. We also analyze
the impact of real channel estimation and show that significant gains in terms
of spectral efficiency or coverage area are still available even with
estimation errors and imperfect interference cancellation for the two-layered
superposition system
Improving the Performance of OTDOA based Positioning in NB-IoT Systems
In this paper, we consider positioning with
observed-time-difference-of-arrival (OTDOA) for a device deployed in
long-term-evolution (LTE) based narrow-band Internet-of-things (NB-IoT)
systems. We propose an iterative expectation-maximization based successive
interference cancellation (EM-SIC) algorithm to jointly consider estimations of
residual frequency-offset (FO), fading-channel taps and time-of-arrival (ToA)
of the first arrival-path for each of the detected cells. In order to design a
low complexity ToA detector and also due to the limits of low-cost analog
circuits, we assume an NB-IoT device working at a low-sampling rate such as
1.92 MHz or lower. The proposed EM-SIC algorithm comprises two stages to detect
ToA, based on which OTDOA can be calculated. In a first stage, after running
the EM-SIC block a predefined number of iterations, a coarse ToA is estimated
for each of the detected cells. Then in a second stage, to improve the ToA
resolution, a low-pass filter is utilized to interpolate the correlations of
time-domain PRS signal evaluated at a low sampling-rate to a high sampling-rate
such as 30.72 MHz. To keep low-complexity, only the correlations inside a small
search window centered at the coarse ToA estimates are upsampled. Then, the
refined ToAs are estimated based on upsampled correlations. If at least three
cells are detected, with OTDOA and the locations of detected cell sites, the
position of the NB-IoT device can be estimated. We show through numerical
simulations that, the proposed EM-SIC based ToA detector is robust against
impairments introduced by inter-cell interference, fading-channel and residual
FO. Thus significant signal-to-noise (SNR) gains are obtained over traditional
ToA detectors that do not consider these impairments when positioning a device.Comment: Accepted in GlobeCom 2017, 7 pages, 11 figure
Joint User Scheduling and Power optimization in Full-Duplex Cells with Successive Interference Cancellation
This paper considers a cellular system with a full-duplex base station and
half-duplex users. The base station can activate one user in uplink or downlink
(half-duplex mode), or two different users one in each direction simultaneously
(full-duplex mode). Simultaneous transmissions in uplink and downlink causes
self-interference at the base station and uplink-to-downlink interference at
the downlink user. Although uplink-to-downlink interference is typically
treated as noise, it is shown that successive interference decoding and
cancellation (SIC mode) can lead to significant improvement in network utility,
especially when user distribution is concentrated around a few hotspots. The
proposed temporal fair user scheduling algorithm and corresponding power
optimization utilizes full-duplex and SIC modes as well as half-duplex
transmissions based on their impact on network utility. Simulation results
reveal that the proposed strategy can achieve up to 95% average cell throughput
improvement in typical indoor scenarios with respect to a conventional network
in which the base station is half-duplex.Comment: To be appeared in IEEE Asilomar Conference on Signals, Systems, and
Computers, 201
A Robust Low-Complexity MIMO Detector for Rank 4 LTE/LTE-A Systems
This paper deals with MIMO detection for rank 4 LTE systems. The paper
revolves around a previously known detector [1, by Inkyu Lee, TCOM'2010] which
we shall refer to as RCSMLD
(Reduced-Constellation-Size-Maximum-Likelihood-Detector). However, a direct
application of the scheme in [1, by Inkyu Lee, TCOM'2010] to LTE/LTE-A rank 4
test cases results in unsatisfactory performance. The first contribution of the
paper is to introduce several modifications that can jointly be applied to the
basic RCSMLD scheme which, taken together, result in excellent performance. Our
second contribution is the development of a highly efficient hardware structure
for RCSMLD that allows for an implementation with very few multiplications.Comment: Accepted for publication in PIMRC-2014, Washington DC, US
- …