A computer aided design system with parametric dimensioning : a thesis presented in partial fulfilment of the requirements for the degree of Master of Philosophy in Industrial Technology at Massey University

This thesis develops the concept of a parametrically dimensioned CAD system. Conventional CAD systems require the actual dimensions of all objects drawn to be defined during the drawing process. To alter any dimension requires manual modification of all affected objects in the drawing. Parametrically dimensioned CAD systems would allow drawings to be constructed containing dimensions defined using variable parameters. These parametric drawings could then be fully specified at some later stage by supplying actual values for the parameters. Such systems would allow drawings of families of components (that varied only in their dimensions) to be easily produced from a single parametric drawing, would simplify dimensional modifications to drawings, and would permit the drawing production to be part of an automated design process. The general requirements for such a parametric CAD system are developed in the thesis and the implementation of a limited package based on these ideas is described. On the basis of this work, it has been concluded that such systems are viable, could have successful user interfaces and would be a valuable extension to conventional CAD packages

Application of computer-aided dispatch in law enforcement: An introductory planning guide

A set of planning guidelines for the application of computer-aided dispatching (CAD) to law enforcement is presented. Some essential characteristics and applications of CAD are outlined; the results of a survey of systems in the operational or planning phases are summarized. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Detailed descriptions of typical law enforcement CAD systems, and a list of vendor sources, are given in appendixes

An application protocol for CAD to CAD transfer of electronic information

The exchange of Computer Aided Design (CAD) information between dissimilar CAD systems is a problem. This is especially true for transferring electronics CAD information such as multi-chip module (MCM), hybrid microcircuit assembly (HMA), and printed circuit board (PCB) designs. Currently, there exists several neutral data formats for transferring electronics CAD information. These include IGES, EDIF, and DXF formats. All these formats have limitations for use in exchanging electronic data. In an attempt to overcome these limitations, the Navy's MicroCIM program implemented a project to transfer hybrid microcircuit design information between dissimilar CAD systems. The IGES (Initial Graphics Exchange Specification) format is used since it is well established within the CAD industry. The goal of the project is to have a complete transfer of microelectronic CAD information, using IGES, without any data loss. An Application Protocol (AP) is being developed to specify how hybrid microcircuit CAD information will be represented by IGES entity constructs. The AP defines which IGES data items are appropriate for describing HMA geometry, connectivity, and processing as well as HMA material characteristics

How to discriminate between computer-aided and computer-hindered decisions: a case study in mammography

Background. Computer aids can affect decisions in complex ways, potentially even making them worse; common assessment methods may miss these effects. We developed a method for estimating the quality of decisions, as well as how computer aids affect it, and applied it to computer-aided detection (CAD) of cancer, reanalyzing data from a published study where 50 professionals (“readers”) interpreted 180 mammograms, both with and without computer support. Method. We used stepwise regression to estimate how CAD affected the probability of a reader making a correct screening decision on a patient with cancer (sensitivity), thereby taking into account the effects of the difficulty of the cancer (proportion of readers who missed it) and the reader’s discriminating ability (Youden’s determinant). Using regression estimates, we obtained thresholds for classifying a posteriori the cases (by difficulty) and the readers (by discriminating ability). Results. Use of CAD was associated with a 0.016 increase in sensitivity (95% confidence interval [CI], 0.003–0.028) for the 44 least discriminating radiologists for 45 relatively easy, mostly CAD-detected cancers. However, for the 6 most discriminating radiologists, with CAD, sensitivity decreased by 0.145 (95% CI, 0.034–0.257) for the 15 relatively difficult cancers. Conclusions. Our exploratory analysis method reveals unexpected effects. It indicates that, despite the original study detecting no significant average effect, CAD helped the less discriminating readers but hindered the more discriminating readers. Such differential effects, although subtle, may be clinically significant and important for improving both computer algorithms and protocols for their use. They should be assessed when evaluating CAD and similar warning systems

Systems Issues in Solid Freeform Fabrication

This paper is concerned with the systems aspects of the Solid Freeform Fabrication (SFF) technology, i.e., the issues that deal with getting an external geometric CAD model to automatically control the physical layering fabrication process as directly as possible, regardless ofthe source of the model. The general systems issues are described, the state of systems research is given, and open research questions are posed.Mechanical Engineerin

The dynamic interaction of order flows and the CAD/USD exchange rate

We explore the relationship between disaggregated order flow, the Canada/U.S. dollar (CAD/USD) market and U.S. macroeconomic announcements. Three types of CAD order flow and the CAD/USD are cointegrated. Financial order flow appears to contemporaneously drive the CAD/USD while commercial order flow seems to contemporaneously respond to exchange rate movements. Past order flow and lagged exchange rates strongly explain most types of order flow. Despite this predictability and the contemporaneous correlation of order flow with exchange rate returns, exchange rate returns are not predictable by either statistical or economic criteria (trading rule). This negative finding contrasts with that of Rime et al (2007), who use a different data set. There is strong evidence of structural breaks in the order-flow-exchange rate systems in 1994, 1996-1997 and 1999-2000.Foreign exchange rates

Speeding up Cylindrical Algebraic Decomposition by Gr\"obner Bases

Gr\"obner Bases and Cylindrical Algebraic Decomposition are generally thought of as two, rather different, methods of looking at systems of equations and, in the case of Cylindrical Algebraic Decomposition, inequalities. However, even for a mixed system of equalities and inequalities, it is possible to apply Gr\"obner bases to the (conjoined) equalities before invoking CAD. We see that this is, quite often but not always, a beneficial preconditioning of the CAD problem. It is also possible to precondition the (conjoined) inequalities with respect to the equalities, and this can also be useful in many cases.Comment: To appear in Proc. CICM 2012, LNCS 736

Особенности твердотельного геометрического моделирования машиностроительных объектов

The problems, related with programming of CAD systems for geometrical modeling of mechanical construction, are considered. The cast of common standards related with modern CAD systems a described. Variant of necessary parameters in future design of CAD systems for mechanic a done