207 research outputs found
A low-complexity eigenfilter design method for channel shortening equalizers for DMT systems
We present a new low-complexity method for the design of channel shortening equalizers for discrete multitone (DMT) modulation systems using the eigenfilter approach. In contrast to other such methods which require a Cholesky decomposition for each delay parameter value used, ours requires only one such decomposition. Simulation results show that our method performs nearly optimally in terms of observed bit rate
Noise optimized eigenfilter design of time-domain equalizers for DMT systems
The design of time-domain equalizers or TEQs for discrete multitone modulation (DMT) systems has recently received much attention. In this paper, we present a generalization of one such design method which takes into account the noise observed in a DMT channel. Furthermore, we show how this generalization can be used for the design of fractionally spaced equalizers or FSEs. Experimental results are presented showing that our design method performs better than other known techniques
Discrete multitone modulation with principal component filter banks
Discrete multitone (DMT) modulation is an attractive method for communication over a nonflat channel with possibly colored noise. The uniform discrete Fourier transform (DFT) filter bank and cosine modulated filter bank have in the past been used in this system because of low complexity. We show in this paper that principal component filter banks (PCFB) which are known to be optimal for data compression and denoising applications, are also optimal for a number of criteria in DMT modulation communication. For example, the PCFB of the effective channel noise power spectrum (noise psd weighted by the inverse of the channel gain) is optimal for DMT modulation in the sense of maximizing bit rate for fixed power and error probabilities. We also establish an optimality property of the PCFB when scalar prefilters and postfilters are used around the channel. The difference between the PCFB and a traditional filter bank such as the brickwall filter bank or DFT filter bank is significant for effective power spectra which depart considerably from monotonicity. The twisted pair channel with its bridged taps, next and fext noises, and AM interference, therefore appears to be a good candidate for the application of a PCFB. This is demonstrated with the help of numerical results for the case of the ADSL channel
Intersymbol and Intercarrier Interference in OFDM Transmissions through Highly Dispersive Channels
This work quantifies, for the first time, intersymbol and intercarrier
interferences induced by very dispersive channels in OFDM systems. The
resulting achievable data rate for \wam{suboptimal} OFDM transmissions is
derived based on the computation of signal-to-interference-plus-noise ratio for
arbitrary length finite duration channel impulse responses. Simulation results
point to significant differences between data rates obtained via conventional
formulations, for which interferences are supposed to be limited to two or
three blocks, versus the data rates considering the actual channel dispersion
Recommended from our members
Channel equalization to achieve high bit rates in discrete multitone systems
textMulticarrier modulation (MCM) techniques such as orthogonal frequency division
multiplexing (OFDM) and discrete multi-tone (DMT) modulation are attractive
for high-speed data communications due to the ease with which MCM can combat
channel dispersion. With all the benefits MCM could give, DMT modulation has an
extra ability to perform dynamic bit loading, which has the potential to exploit fully
the available bandwidth in a slowly time-varying channel. In broadband wireline
communications, DMT modulation is standardized for asymmetric digital subscribe
line (ADSL) and very-high-bit-rate digital subscriber line (VDSL) modems. ADSL
and VDSL standards are used by telephone companies to provide high speed data
service to residences and offices.
In an ADSL receiver, an equalizer is required to compensate for the channel’s
dispersion in the time domain and the channel’s distortion in the frequency domain
of the transmitted waveform. This dissertation proposes design methods for linear
equalizers to increase the bit rate of the connection. The methods are amenable
to implementation on programmable fixed-point digital signal processors, which are
employed in ADSL/VDSL transceivers.
A conventional ADSL equalizer consists of a time-domain equalizer, a fast
Fourier transform, and a frequency domain equalizer. The time domain equalizer
(TEQ) is a finite impulse response filter that when coupled with a discretized channel
produces an equivalent channel whose impulse response is shorter than that of
the discretized channel. This channel shortening is required by the ADSL standards.
In this dissertation, I first propose a linear phase TEQ design that exploits symmetry
in existing eigen-filter approaches such as minimum mean square error(MMSE),
maximum shortening signal to noise ratio (MSSNR) and minimum intersymbol interference
(Min-ISI) equalizers. TEQs with symmetric coefficients can reach the
same performance as non-symmetric ones with much lower training complexity.
Second, I improve Min-ISI design. I reformulate the cost function to make
long TEQs design feasible. I remove the dependency of transmission delay in order
to reduce the complexity associated with delay optimization. The quantized
weighting is introduced to further lower the complexity. I also propose an iterative
optimization procedure of Min-ISI that completely avoids Cholesky decomposition
hence is better suited for a fixed-point implementation.
Finally I propose a dual-path TEQ structure, which designs a standard singleFIR
TEQ to achieve good bit rate over the entire transmission bandwidth, and
designs another FIR TEQ to improve the bit rate over a subset of subcarriers. Dualpath
TEQ can be viewed as a special case of a complex valued filter bank structure
that delivers the best bit rate of existing DMT equalizers. However, dual-path
TEQ provides a very good tradeoff between achievable bit rate vs. implementation
complexity on a programmable digital signal processor.Electrical and Computer Engineerin
Numerical study of a hybrid optical DMT/DFT-S QAM modulation
A hybrid modulation offers the peak-to-average power ratio (PAPR) robustness of discrete Fourier transform spread (DFT-S) QAM (quadrature amplitude modulation) with the bit rate optimization of discrete multi-tone (DMT) modulation. We examine via simulation under what circumstances this hybrid can increase achievable bit rate. Hybrid PAPR reduction allows us to increase the peak-to-peak voltage at the modulator electrical input to increase the signal mean power at the modulator output. We propose a methodology to identify the optimal driving strategy. We optimize the bit rate for the available spectrum, i.e., the spectral efficiency, taking into account the bandwidth limited nature of the transmitter. The final optimization we propose is the partition of the available spectrum into a lower frequency band for DFT-S QAM and a higher frequency band for DMT. The modulation level of the DFT-S QAM is also optimized. We compare the optimal hybrid performance versus DMT performance for a range of bit rates for a given modulation bandwidth. Improved performance comes at the cost of greater DSP complexity for the hybrid solution. We compare the number of complex multipliers required to implement hybrid versus DMT for both dispersive and non-dispersive systems
On the eigenfilter design method and its applications: a tutorial
The eigenfilter method for digital filter design involves the computation of filter coefficients as the eigenvector of an appropriate Hermitian matrix. Because of its low complexity as compared to other methods as well as its ability to incorporate various time and frequency-domain constraints easily, the eigenfilter method has been found to be very useful. In this paper, we present a review of the eigenfilter design method for a wide variety of filters, including linear-phase finite impulse response (FIR) filters, nonlinear-phase FIR filters, all-pass infinite impulse response (IIR) filters, arbitrary response IIR filters, and multidimensional filters. Also, we focus on applications of the eigenfilter method in multistage filter design, spectral/spacial beamforming, and in the design of channel-shortening equalizers for communications applications
- …