45,083 research outputs found

    Utilization of biodegradable wastes as a clean energy source in the developing countries: A case study in Myanmar

    Get PDF
    Nowadays, waste-to-energy has become a type of renewable energy utilization that can provide environmental and economic benefits in the world. In this paper, we evaluated the quality of twelve biodegradable waste samples from Myanmar by binder laboratory heating and drying oven at 105 degrees C. The calculation methods of the Intergovernmental Panel on Climate Change (IPCC) and Institute for Global Environmental Strategies (IGES) were used for the greenhouse gas emission estimation from waste disposal at the open dumpsites, anaerobic digestion, and waste transportation in the current situation of Myanmar. Greenhouse gas (GHG) emission and fossil fuel consumption of the improved biodegrade waste utilization system were estimated and both were found to be reduced. As a result, volume and weight of the biodegradable wastes with 100% moisture reduction were estimated at approximately 5 million cubic meters per year and 2600 kilotonnes per year, respectively, in 2021. The total GHG emissions in the current situation amounted to approximately 1500 and 1800 Gigagrams of CO2-eq per year in 2019 and 2021, respectively, while the total GHG emission avoidance from a sustainable approach amounted to 3500 and 4000 Gigagrams of CO2-eq per year, respectively. The study aimed at highlighting the utilization of biodegradable wastes as a clean energy source in developing countries.Web of Science1111art. no. 318

    The influence of natural pulmonary surfactant on the efficacy of siRNA-loaded dextran nanogels

    Get PDF
    Aim: Topical administration of siRNA nanocarriers is a promising approach in the treatment of pulmonary disorders. Pulmonary surfactant, covering the entire alveolar surface of mammalian lungs, will be one of the first interfaces that siRNA nanocarriers encounter upon inhalation therapy. Therefore, it is of outstanding importance to evaluate the impact of pulmonary surfactant on the performance of siRNA nanocarriers. Materials & methods: The effect of natural lung-derived surfactants on the siRNA delivery capacity of dextran nanogels (DEX-NGs) was evaluated in vitro using flow cytometry and confocal microscopy. Results: Although the interaction with pulmonary surfactant decreases the cellular internalization of siRNA-loaded DEX-NGs significantly, the gene silencing potential of siRNA-loaded DEX-NGs was maintained. On the other hand, cationic lipid-based siRNA nanocarriers (Lipofectamine (TM) RNAiMAX) were incompatible with pulmonary surfactants. Conclusion: Our data suggest that pulmonary surfactant can enhance the intracellular siRNA delivery by DEX-NGs, thereby possibly providing new therapeutic opportunities

    Model based study of autothermal thermophilic aerobic digestion (ATAD) processes : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Engineering and Automation of Massey University

    Get PDF
    An Autothermal Thermophilic Aerobic Digestion process, or ATAD process, is a relatively new sewage sludge treatment process. The ATAD process has been developed for the disinfection and stabilisation of sewage sludge, which is a by-product of wastewater treatment. The end product can be applied to the land as a soil additive or fertiliser with no restrictions, as the process dramatically reduces public health and environmental risks. The process is comparable to the composting process used for municipal solid waste and garden wastes. The process requires oxygen, usually in the form of air, to be applied to the sludge by an aeration system. The oxygen stimulates an exothermic biochemical reaction, which in turn heats the sludge up to thermophilic temperatures (between 50 and 65°C). At these temperatures the pathogenic bacteria, viruses and parasites in the sludge that are harmful to human health are effectively destroyed. The biochemical reaction also degrades a large portion of the organic sludge, which means that unstable, volatile odour generating substances are removed; this reduces the likelihood of smells and the attraction of flies and rodents (vector attraction) to the sludge.[FROM INTRODUCTION

    Reducing environmental pollution caused by construction plant

    Get PDF
    Quantifiable data produced in a national report by the Environment Agency of England and Wales entitled ‘Water pollution incidents in England and Wales 1997’ and published by the Stationery Office in 1998, identifies that of over 3,723 substantiated pollution incidents across England and Wales in 1997. Within the generic sector classed as ‘Industry’ the construction industry was the most frequent polluter responsible for 22% of all substantiated water-related pollution incidents in that sector. The report also identified that a significant number (28%) of all substantiated pollution incidents across England and Wales are directly attributable to mineral-based fuels and oils many of which are used extensively within the construction industry. This paper seeks to locate the possible causes and effects for some of that oil-based pollution, discuss the issues and identifies a unique and radical Client-motivated solution within the UK to reduce and mitigate the undesirable impacts upon the environment. Evidence produced by the oil industry shows the enormous amount of one particularly aggressive pollutant –hydraulic oil, – which remains annually, unaccounted for. Hydraulic oil is used in most tracked earthmoving machinery; the sort of machinery most closely associated with construction work carried out near to watercourses. Biodegradable hydraulic oil is much more considerate to the environment, but is more expensive and not usually installed in new plant and machinery. The paper argues that on a life cycle basis the use of biodegradable oil is viable and feasible and that there are many external factors that make its usage desirable

    Effects of composting manures and other organic wastes on soil processes and pest and disease interactions

    Get PDF
    Introduction Composts and manures are of major importance in providing fertility in organic farming systems, since synthetic fertilisers are prohibited. It is understood that composts have radically different nutrient release characteristics to those of uncomposted materials and manures, and it is believed that composting increases the beneficial effects of organic materials on soil health, soil quality, soil fertility and nutrient use efficiency. It has also been shown that some plant pests and diseases are suppressed through the application of composts and compost extracts to soils. There is considerable potential to use a wider range of feedstocks from on and off-farm sources and to improve the composting process and compost/manure application techniques. This review of scientific work to date was urgently required to help determine key research priorities to achieve this potential (Defra project OF0313). Project aims 1.To document the current standards, regulations and legislation relevant to recycling, compost/manure preparation and application and to review common UK practices relating to the preparation and application of uncomposted materials, manures, composts and compost extracts. 2. To review current scientific knowledge (from the literature) of the effects of different composting processes on chemical and biological parameters in the finished compost or compost extract. 3. To review (from the literature) the effects of uncomposted materials, manures and composts on soil health and quality, soil fertility and crop development and nutrition. 4. To review (from the literature) the effects of uncomposted materials, manures, composts and compost extracts on pest and disease incidence and severity in agricultural and horticultural crops. 5. To outline a proposed strategy for research which seeks to develop composting systems and compost/manure application protocols with a view to optimising soil fertility management and pest and disease control in organic agriculture and horticulture. Objective 1 - The current standards, regulations and legislation relevant to recycling, compost/manure preparation and application are documented in detail in the full report on Objective 1 (Appendix 2). Manures and uncomposted plant materials (e.g. green manures) are commonly used on UK organic farms. True composts (defined in the glossary, Appendix 1) are rarely prepared on UK organic farms, although there is increasing interest in their use, particularly on farms producing high value horticultural crops. An increasing number of companies are producing (or are interested in producing) composts suitable for use on organic farms as soil amendments or growing media. Objective 2 - The effects of different composting processes on chemical and biological parameters in the finished compost or compost extract are reviewed in detail in the full report on Objective 2 (Appendix 3). A short version of this review appears on pages 7-10 of this report. Objective 3 - The effects of uncomposted materials, manures and composts on soil health and quality, soil fertility and crop development and nutrition are reviewed in detail in the full report on Objective 3 (Appendix 4). A short version of this review appears on pages 10-13 of this report. Objective 4 - The effects of uncomposted materials, manures, composts and compost extracts on pest and disease incidence and severity in agricultural and horticultural crops are reviewed in detail in the full report on Objective 4 (Appendix 5). A short version of this review appears on pages 13-17 of this report. Objective 5 - A proposed strategy for research was outlined which seeks to develop composting systems and compost/manure application protocols with a view to optimising soil fertility management and pest/disease control in organic agriculture/horticulture Organic farming systems are by nature holistic. In other words, they function as a whole and all aspects of the system are interdependent on many other aspects of the system. It is essential therefore that research which is carried out to optimise the use of uncomposted plant residues, composts, manures and compost extracts is interdisciplinary; that is it must be carried out with reference to the organic farming system as a whole and not just a single aspect of it. Technology transfer and knowledge transfer are key elements to the proposed strategy for research. Seminars and conferences, farm walks, demonstration farms and a wide range of publishing formats must be used to ensure that end users have full access to the results of research carried out in the UK and abroad. The amount of information which is available for dissemination to those who wish to make or use composts will naturally depend on the amount of relevant research and development work which is going on in the UK, Europe and worldwide

    Enzymatic activity toward poly(L-lactic acid) implants

    Get PDF
    Tissue reactions toward biodegradable poly(L-lactic acid) implants were monitored by studying the activity pattern of seven enzymes as a function of time: alkaline phosphatase, acid phosphatase, -naphthyl acetyl esterase, -glucuronidase, ATP-ase, NADH-reductase, and lactate dehydrogenase. Cell types were identified by their specific enzyme patterns, their morphology and location. Special attention was paid to the enzyme patterns of macrophages, fibroblasts and polymorphonuclear granulocytes (PMNs), being involved in foreign body reactions or inflammatory responses. One day after implantation, an influx of neutrophilic and eosinophilic granulocytes was observed, coinciding with activity of alkaline phosphatase (PMN's) and -glucuronidase (eosinophils). From day 3 on, macrophages containing ATP-ase, acid phosphatase and esterase could be observed. From day 7 on, lactate dehydrogenase, the enzyme normally involved in the conversion of lactic acid, and its coenzyme NADH-reductase were observed in macrophages and fibroblasts. These two enzymes demonstrated more activity than expected on basis of wound-healing reactions upon implantation of a nonbiodegradable, inert biomaterial (as, e.g., Teflon). It is concluded that the biodegradable poly (L-lactic acid) used in these implantation studies is tissue compatible, and evokes a foreign body reaction with minor macrophage and giant cell activity, as observed during this 3-week implantation period. Most enzyme patterns were simply due to a wound-healing reaction. The slightly increased levels of LDH and NADH suggest the release of lactic acid from the implant, and thus confirms the biodegradable nature of this polymer

    Microbial solar cells: applying photosynthetic and electrochemically active organisms

    Get PDF
    Microbial solar cells (MSCs) are recently developed technologies utilizing solar energy to produce electricity or chemicals. MSCs use photoautotrophic microorganisms or higher plants to harvest solar energy, and use electrochemically active microorganisms in the bioelectrochemical system to generate electrical current. Here, we review the principles and performance of various MSCs, in an effort to identify the most promising systems as well as the bottlenecks and potential solutions towards „real life. MSC application. We give an outlook on future applications based on the intrinsic advantages of MSCs, showcasing specifically how these living energy systems can facilitate the development of an electricity-producing green roof.This is a "Post-Print" accepted manuscript, which has been published in "Trends in Biotechnology". This version is distributed under the Creative Commons Attribution 3.0 Netherlands License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Please cite this publication as follows: 2011 Trends in Biotechnology Microbial solar cells: applying photosynthetic and electrochemically active organisms. David P.B.T.B. Strik, Ruud A. Timmers, Marjolein Helder, Kirsten J.J. Steinbusch, Hubertus V.M. Hamelers, , Cees J.N. Buisman. Trends in Biotechnology 29 (1), 41-49 You can download the published version at: http://dx.doi.org/10.1016/j.tibtech.2010.10.00
    corecore