Biochar from Pyrolysis of Biosolids for Nutrient Adsorption and Turfgrass Cultivation

At water resource recovery facilities, nutrient removal is often required and energy recovery is an ever-increasing goal. Pyrolysis may be a sustainable process for handling wastewater biosolids because energy can be recovered in the py-gas and py-oil. Additionally, the biochar produced has value as a soil conditioner. The objective of this work was to determine if biochar could be used to adsorb ammonia from biosolids filtrate and subsequently be applied as a soil conditioner to improve grass growth. The maximum carrying capacity of base modified biochar for NH3−N was 5.3 mg/g. Biochar containing adsorbed ammonium and potassium was applied to laboratory planters simulating golf course putting greens to cultivate Kentucky bluegrass. Planters that contained nutrient-laden biochar proliferated at a statistically higher rate than planters that contained biosolids, unmodified biochar, peat, or no additive. Nutrient-laden biochar performed as well as commercial inorganic fertilizer with no statistical difference in growth rates. Biochar from digested biosolids successfully immobilized NH3−N from wastewater and served as a beneficial soil amendment. This process offers a means to recover and recycle nutrients from water resource recovery facilities

A critical review on sustainable biochar system through gasification: energy and environmental applications

This review lays great emphasis on production and characteristics of biochar through gasification. Specifically, the physicochemical properties and yield of biochar through the diverse gasification conditions associated with various types of biomass were extensively evaluated. In addition, potential application scenarios of biochar through gasification were explored and their environmental implications were discussed. To qualitatively evaluate biochar sustainability through the gasification process, all gasification products (i.e., syngas and biochar) were evaluated via life cycle assessment (LCA). A concept of balancing syngas and biochar production for an economically and environmentally feasible gasification system was proposed and relevant challenges and solutions were suggested in this review

Enhancing methane production from food waste fermentate using biochar. The added value of electrochemical testing in pre-selecting the most effective type of biochar

Background: Recent studies have suggested that addition of electrically conductive biochar particles is an effective strategy to improve the methanogenic conversion of waste organic substrates, by promoting syntrophic associations between acetogenic and methanogenic organisms based on interspecies electron transfer processes. However, the underlying fundamentals of the process are still largely speculative and, therefore, a priori identification, screening, and even design of suitable biochar materials for a given biotechnological process are not yet possible. Results: Here, three charcoal-like products (i.e., biochars) obtained from the pyrolysis of different lignocellulosic materials, (i.e., wheat bran pellets, coppiced woodlands, and orchard pruning) were tested for their capacity to enhance methane production from a food waste fermentate. In all biochar-supplemented (25 g/L) batch experiments, the complete methanogenic conversion of fermentate volatile fatty acids proceeded at a rate that was up to 5 times higher than that observed in the unamended (or sand-supplemented) controls. Fluorescent in situ hybridization analysis coupled with confocal laser scanning microscopy revealed an intimate association between archaea and bacteria around the biochar particles and provided a clear indication that biochar also shaped the composition of the microbial consortium. Based on the application of a suite of physico-chemical and electrochemical characterization techniques, we demonstrated that the positive effect of biochar is directly related to the electron-donating capacity (EDC) of the material, but is independent of its bulk electrical conductivity and specific surface area. The latter properties were all previously hypothesized to play a major role in the biochar-mediated interspecies electron transfer process in methanogenic consortia. Conclusions: Collectively, these results of this study suggest that for biochar addition in anaerobic digester operation, the screening and identification of the most suitable biochar material should be based on EDC determination, via simple electrochemical tests. © 2017 The Author(s)

Reverse engineering of biochar

This study underpins quantitative relationships that account for the combined effects that starting biomass and peak pyrolysis temperature have on physico-chemical properties of biochar. Meta-data was assembled from published data of diverse biochar samples (n = 102) to (i) obtain networks of intercorrelated properties and (ii) derive models that predict biochar properties. Assembled correlation networks provide a qualitative overview of the combinations of biochar properties likely to occur in a sample. Generalized Linear Models are constructed to account for situations of varying complexity, including: dependence of biochar properties on single or multiple predictor variables, where dependence on multiple variables can have additive and/or interactive effects; non-linear relation between the response and predictors; and non-Gaussian data distributions. The web-tool Biochar Engineering implements the derived models to maximize their utility and distribution. Provided examples illustrate the practical use of the networks, models and web-tool to engineer biochars with prescribed properties desirable for hypothetical scenarios

Biowęgiel z pofermentacyjnej pozostałości kukurydzy hybrydowej - tani i wydajny sorbent metali ciężkich

Biochar produced from fermentation residue of maize hybrid was used in untreated form as a sorbent for the removal of Cd(II), Pb(II) and Zn(II) from aqueous solution. The capability of biochar to immobilized ions was investigated by leaching test. Equilibrium between biochar sample and studied elements in solution was reached at a contact time 30 min for Zn(II) and 90 min for Pb(II) and Cd(II). The experimental data were described by pseudofirst-order and pseudo-second-order kinetic model, two- and three-parameter isotherms in non-linear form. The maximum sorption capacity achieved was 30.07 mg.g(-1) in the case of Cd(II) ions, 99.44 mg.g(-1) in the case of Pb( II) and 40.18 in the case of Zn(II). Biochar developed for this study is comparable to conventional biochar, low cost, non-toxic and experimental results show that is a suitable and efficient sorbent for Cd(II), Pb(II) and Zn(II) removal from aqueous solutions.Web of Science26475774

Ion Exchange for Nutrient Recovery Coupled with Biosolids-Derived Biochar Pretreatment to Remove Micropollutants

Wastewater, especially anaerobic treatment effluent, contains high ammonia nitrogen (NH4-N) and inorganic orthophosphate (PO4-P), which necessitate additional treatment to meet stringent discharge regulations. Ion exchange regeneration is a process that can be adopted for not only removing but also recovering nutrients. However, recovering nutrients by ion exchange from nutrient-rich effluents that also contain micropollutants (which typically pass through anaerobic treatment as well) may result in subsequent problems, since micropollutants could end up in ion exchange effluent, regenerant, or recovered fertilizer products. Micropollutant removal by a nonselective adsorbent, such as biosolids-derived biochar, before nutrient recovery processes would mitigate potential risks. The objective of this research was to evaluate the capability of biosolids-derived biochar as a pretreatment step for separating micropollutants from nutrient-rich water before ion exchange for nutrient recovery. In the presence of ammonium and phosphate, both pristine and regenerated biosolids-derived biochar could effectively adsorb triclosan (TCS) and estradiol (E2), and to a lesser extent, sulfamethoxazole (SMX) in batch sorption experiments. On the other hand, nutrient ions were not effectively adsorbed by biosolids-derived biochar. A continuous flow-through system consisting of columns in series filled with biochar, LayneRT, and then clinoptilolite was operated to test selective removal of micropollutants and nutrients in a flow-through system. The biochar column achieved more than 80% removal of influent TCS and E2, thereby reducing the chances of micropollutants being adsorbed by ion exchangers. Sulfamethoxazole removal through the biochar column was only 50%, indicating that biosolids-derived biochar would have to be optimized in the future for hydrophilic micropollutant removal. Influent nutrients were not effectively removed by the biochar column, but were captured in their respective selective ion exchanger columns. This research revealed that biosolids-derived biochar could be employed before ion exchange resins for removal of micropollutants from nutrient-rich water

Biomass gasification for syngas and biochar co-production: Energy application and economic evaluation

Syngas and biochar are two main products from biomass gasification. To facilitate the optimization of the energy efficiency and economic viability of gasification systems, a comprehensive fixed-bed gasification model has been developed to predict the product rate and quality of both biochar and syngas. A coupled transient representative particle and fix-bed model was developed to describe the entire fixed-bed in the flow direction of primary air. A three-region approach has been incorporated into the model, which divided the reactor into three regions in terms of different fluid velocity profiles, i.e. natural convection region, mixed convection region, and forced convection region, respectively. The model could provide accurate predictions against experimental data with a deviation generally smaller than 10%. The model is applicable for efficient analysis of fixed-bed biomass gasification under variable operating conditions, such as equivalence ratio, moisture content of feedstock, and air inlet location. The optimal equivalence ratio was found to be 0.25 for maximizing the economic benefits of the gasification process

Enhancing methane production from food waste fermentate using biochar. The added value of electrochemical testing in pre-selecting the most effective type of biochar

Background: Recent studies have suggested that addition of electrically conductive biochar particles is an effective strategy to improve the methanogenic conversion of waste organic substrates, by promoting syntrophic associations between acetogenic and methanogenic organisms based on interspecies electron transfer processes. However, the underlying fundamentals of the process are still largely speculative and, therefore, a priori identification, screening, and even design of suitable biochar materials for a given biotechnological process are not yet possible. Results: Here, three charcoal-like products (i.e., biochars) obtained from the pyrolysis of different lignocellulosic materials, (i.e., wheat bran pellets, coppiced woodlands, and orchard pruning) were tested for their capacity to enhance methane production from a food waste fermentate. In all biochar-supplemented (25 g/L) batch experiments, the complete methanogenic conversion of fermentate volatile fatty acids proceeded at a rate that was up to 5 times higher than that observed in the unamended (or sand-supplemented) controls. Fluorescent in situ hybridization analysis coupled with confocal laser scanning microscopy revealed an intimate association between archaea and bacteria around the biochar particles and provided a clear indication that biochar also shaped the composition of the microbial consortium. Based on the application of a suite of physico-chemical and electrochemical characterization techniques, we demonstrated that the positive effect of biochar is directly related to the electron-donating capacity (EDC) of the material, but is independent of its bulk electrical conductivity and specific surface area. The latter properties were all previously hypothesized to play a major role in the biochar-mediated interspecies electron transfer process in methanogenic consortia. Conclusions: Collectively, these results of this study suggest that for biochar addition in anaerobic digester operation, the screening and identification of the most suitable biochar material should be based on EDC determination, via simple electrochemical tests. © 2017 The Author(s)

Soil carbon sequestration and biochar as negative emission technologies

Acknowledgements Thanks to Steve J. Davis who created the original figures from which the figures presented here were adapted. This output contributes to the Belmont Forum/FACCE-JPI funded DEVIL project (NE/M021327/1), the Global Carbon Project and the MaGNET programme (http://www.cger.nies.go.jp/gcp/magnet.html), and also contributes to the EU FP7 SmartSoil project (project number: 289694).Peer reviewedPostprin