Automated silicon debug data analysis techniques for a hardware data acquisition environment

Abstract—Silicon debug poses a unique challenge to the en-gineer because of the limited access to internal signals of the chip. Embedded hardware such as trace buffers helps overcome this challenge by acquiring data in real time. However, trace buffers only provide access to a limited subset of pre-selected signals. In order to effectively debug, it is essential to configure the trace-buffer to trace the relevant signals selected from the pre-defined set. This can be a labor-intensive and time-consuming process. This paper introduces a set of techniques to automate the configuring process for trace buffer-based hardware. First, the proposed approach utilizes UNSAT cores to identify signals that can provide valuable information for localizing the error. Next, it finds alternatives for signals not part of the traceable set so that it can imply the corresponding values. Integrating the proposed techniques with a debugging methodology, experiments show that the methodology can reduce 30 % of potential suspects with as low as 8 % of registers traced, demonstrating the effectiveness of the proposed procedures. Index Terms—Silicon debug, post-silicon diagnosis, data acqui-sition setup I

Achieving Functional Correctness in Large Interconnect Systems.

In today's semi-conductor industry, large chip-multiprocessors and systems-on-chip are being developed, integrating a large number of components on a single chip. The sheer size of these designs and the intricacy of the communication patterns they exhibit have propelled the development of network-on-chip (NoC) interconnects as the basis for the communication infrastructure in these systems. Faced with the interconnect's growing size and complexity, several challenges hinder its effective validation. During the interconnect's development, the functional verification process relies heavily on the use of emulation and post-silicon validation platforms. However, detecting and debugging errors on these platforms is a difficult endeavour due to the limited observability, and in turn the low verification capabilities, they provide. Additionally, with the inherent incompleteness of design-time validation efforts, the potential of design bugs escaping into the interconnect of a released product is also a concern, as these bugs can threaten the viability of the entire system. This dissertation provides solutions to enable the development of functionally correct interconnect designs. We first address the challenges encountered during design-time verification efforts, by providing two complementary mechanisms that allow emulation and post-silicon verification frameworks to capture a detailed overview of the functional behaviour of the interconnect. Our first solution re-purposes the contents of in-flight traffic to log debug data from the interconnect's execution. This approach enables the validation of the interconnect using synthetic traffic workloads, while attaining over 80% observability of the routes followed by packets and capturing valuable debugging information. We also develop an alternative mechanism that boosts observability by taking periodic snapshots of execution, thus extending the verification capabilities to run both synthetic traffic and real-application workloads. The collected snapshots enhance detection and debugging support, and they provide observability of over 50% of packets and reconstructs at least half of each of their routes. Moreover, we also develop error detection and recovery solutions to address the threat of design bugs escaping into the interconnect's runtime operation. Our runtime techniques can overcome communication errors without needing to store replicate copies of all in-flight packets, thereby achieving correctness at minimal area costsPhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116741/1/rawanak_1.pd