Asynchronous Modular Arbiter

A practical N-user arbiter and its implementation are presented in this correspondence. Because of the asynchronous character of its input variables (request signals), the design proposed is asynchronous and keeps in mind the possibility of metastable operations. The structure of the arbiter is very simple and modular

High Peformance and Low Power On-Die Interconnect Fabrics.

Increasing power density with technology scaling has caused stagnation in operating frequency of modern day microprocessors. This has led designers to prefer multicore architectures over complex monolithic processors to keep up with the demand for rising computing throughput. Although processing units are getting smaller and simpler, the dramatic rise of their count on a single die has made the fabric that connects these processing units increasingly complex. These interconnect fabrics have become a bottleneck in improving overall system effciency. As a result, the design paradigm for multi-core chips is gradually shifting from a core-centric architecture towards an interconnect-centric architecture, where system efficiency is limited by the fabric rather than the processing ability of any individual core. This dissertation introduces three novel and synergistic circuit techniques to improve scalability of switch fabrics to make on-die integration of hundreds to thousands of cores feasible. 1) A matrix topology is proposed for designing a fully connected switch fabric that re-uses output buses for programming, and stores shue congurations at cross points. This significantly reduces routing congestion, lowers area/power, and improves per- formance. Silicon measurements demonstrate 47% energy savings in a 64-lane SIMD processor fabricated in 65nm CMOS over a conventional implementation. 2) A novel approach to handle high radix arbitration along with data routing is proposed. It optimally uses existing cross-bar interconnect resources without requiring any additional overhead. Bandwidth exceeding 2Tb/s is recorded in a test prototype fabricated in 65nm. 3) Building on the later, a new circuit topology to manage and update priority adaptively within the switch fabric without incurring additional delay or area is then proposed. Several assist circuit techniques, such as a thyristor based sense amplifier and self regenerating bi-directional repeaters are proposed for high speed energy efficient signaling to and from the switch fabric to improve overall routing efficiency. Using these techniques a 64 x 64 switch fabric with 128b data bus fabricated in 45nm achieves a throughput of 4.5Tb/s at single cycle latency while operating at 559MHz.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91506/1/sudhirks_1.pd

Contributions to the Design of Asynchronous Macromodular Systems

In this thesis, I advocate the use of macromodules to design and build robust and performance-competitive asynchronous systems. The contributions of the work relate to different aspects of the design of asynchronous macromodular systems. First, an architectural optimization for 4-phase systems is introduced. The goal of the optimization is to increase the performance of a system by increasing the level of concurrent activity in the sequencing of data processing stages. In particular, three new asynchronous sequencers are designed, which increase the throughput of the system. Existing asynchronous data paths do not operate correctly at this increased level of concurrency: data hazards may result. Interlock mechanisms are introduced to insure correct operation. The technique can also be regarded as a low-power optimization: The increased throughput can be traded for a significant reduction in the power consumption of the entire system. SPICE simulation results show that the new sequencers allow roughly twice the throughput of non-concurrent sequencers. The simulations also show that, after voltage scaling, energy dissipation is reduced by a factor of 2.5. Second, the use of pulses for efficient inter-module synchronization is introduced. The idea is complemented with the definition of a pulse-mode handshake protocol and the characterization of Pulse-Burst Operation (PBO), an important extension to traditional pulse-mode operation. Also, a basic set of macromodules, that efficiently implement control operations such as sequencing, selection, iteration, concurrency control, resource sharing, and arbitration is presented. Modules for interfacing pulse-mode circuits with traditional 2-phase and 4-phase circuits are also included in the set. Finally, the design of a packet switch is used to demonstrate the viability of pulse-mode macromodules to implement complex, high performance systems. The switch organization, its asynchronous operation, and the low control overhead introduced by pulse-mode macromodules result in a design that can handle 2.4 times the target throughput of 155 Mbits/Sec. Also, the switch is characterized by very low input-to-output latency. These results suggest that pulse-mode macromodules can keep control overhead low without introducing complex, unsafe timing considerations, two necessary conditions to achieve robust, performance-competitive systems