157,082 research outputs found
Recommended from our members
Model-based groupware solution for distributed real-time collaborative 4D planning via teamwork
Construction planning plays a fundamental role in construction project management that requires team working among planners from a diverse range of disciplines and in geographically dispersed working situations. Model-based four-dimensional (4D) computer-aided design (CAD) groupware, though considered a possible approach to supporting collaborative planning, is still short of effective collaborative mechanisms for teamwork due to methodological, technological and social challenges. Targeting this problem, this paper proposes a model-based groupware solution to enable a group of multidisciplinary planners to perform real-time collaborative 4D planning across the Internet. In the light of the interactive definition method, and its computer-supported collaborative work (CSCW) design analysis, the paper discusses the realization of interactive collaborative mechanisms from software architecture, application mode, and data exchange protocol. These mechanisms have been integrated into a groupware solution, which was validated by a planning team in a truly geographically dispersed condition. Analysis of the validation results revealed that the proposed solution is feasible for real-time collaborative 4D planning to gain a robust construction plan through collaborative teamwork. The realization of this solution triggers further considerations about its enhancement for wider
groupware applications
Recommended from our members
Potential applications of simulation modelling techniques in healthcare: lessons learned from aerospace and military
The Aerospace and Military areas are to do with complex missions and situations. Modelling and Simulation (M&S) has been applied in many areas of defence ranging from space sciences, satellite engineering to multi-warfare (air warfare, undersea warfare), air & missile defence, acquisition, tactical military trainings & exercises, national security analysis and strategic decision making & planning, etc. The application of simulation modelling techniques in healthcare would improve the provision of healthcare services; however, their application has been much relatively feeble in the healthcare sector as compared to the defence sector. This paper presents results from a systematic literature survey on applications of modelling simulation techniques in the Aerospace & Military. The knowledge gained or lessons learned from the survey were finally used to analyze the potential applications of the simulation modelling techniques to the healthcare sector. Results show that in the defence sector, Distributed Simulation has now become a widely adopted technique. However, System Dynamics (SD) and Discrete Event Simulation (DSE) have also gained relative attention. From this survey it becomes clear that various simulation modelling techniques are useful for specific purposes and have potential applications in the healthcare sector
Design project planning, monitoring and re-planning through process simulation
Effective management of design schedules is a major concern in industry, since timely project delivery can have a significant influence on a companyâs profitability. Based on insights gained through a case study of planning practice in aero-engine component design, this paper examines how task network simulation models can be deployed in a new way to support design process planning. Our method shows how simulation can be used to reconcile a description of design activities and information flows with project targets such as milestone delivery dates. It also shows how monitoring and re-planning can be supported using the non-ideal metrics which the case study revealed are used to monitor processes in practice. The approach is presented as a theoretical contribution which requires further work to implement and evaluate in practice
Decision support for build-to-order supply chain management through multiobjective optimization
This is the post-print version of the final paper published in International Journal of Production Economics. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2010 Elsevier B.V.This paper aims to identify the gaps in decision-making support based on multiobjective optimization (MOO) for build-to-order supply chain management (BTO-SCM). To this end, it reviews the literature available on modelling build-to-order supply chains (BTO-SC) with the focus on adopting MOO techniques as a decision support tool. The literature has been classified based on the nature of the decisions in different part of the supply chain, and the key decision areas across a typical BTO-SC are discussed in detail. Available software packages suitable for supporting decision making in BTO supply chains are also identified and their related solutions are outlined. The gap between the modelling and optimization techniques developed in the literature and the decision support needed in practice are highlighted. Future research directions to better exploit the decision support capabilities of MOO are proposed. These include: reformulation of the extant optimization models with a MOO perspective, development of decision supports for interfaces not involving manufacturers, development of scenarios around service-based objectives, development of efficient solution tools, considering the interests of each supply chain party as a separate objective to account for fair treatment of their requirements, and applying the existing methodologies on real-life data sets.Brunel Research Initiative and Enterprise Fund (BRIEF
Modelling an End to End Supply Chain system Using Simulation
Within the current uncertain environment industries are predominantly faced with various challenges
resulting in greater need for skilled management and adequate technique as well as tools to manage
Supply Chains (SC) efficiently. Derived from this observation is the need to develop a generic/reusable
modelling framework that would allow firms to analyse their operational performance over time (Mackulak
and Lawrence 1998, Beamon and Chen 2001, Petrovic 2001, Lau et al. 2008, Khilwani et al. 2011, Cigollini et
al. 2014). However for this to be effectively managed the simulation modelling efforts should be directed
towards identifying the scope of the SC and the key processes performed between players.
Purpose: The research attempts to analyse trends in the field of supply chain modelling using simulation
and provide directions for future research by reviewing existing Operations Research/Operations
Management (OR/OM) literature. Structural and operational complexities as well as different business
processes within various industries are often limiting factors during modelling efforts. Successively, this
calls for the end to end (E2E) SC modelling framework where the generic processes, related policies and
techniques could be captured and supported by the powerful capabilities of simulation.
Research Approach: Following Mitroffâs (1974) scientific inquiry model and Sargent (2011) this research will
adopt simulation methodology and focus on systematic literature review in order to establish generic OR
processes and differentiate them from those which are specific to certain industries. The aim of the
research is provide a clear and informed overview of the existing literature in the area of supply chain
simulation. Therefore through a profound examination of the selected studies a conceptual model will be
design based on the selection of the most commonly used SC Processes and simulation techniques used
within those processes. The description of individual elements that make up SC processes (Hermann and
Pundoor 2006) will be defined using building blocks, which are also known as Process Categories.
Findings and Originality: This paper presents an E2E SC simulation conceptual model realised through
means of systematic literature review. Practitioners have adopted the term E2E SC while this is not
extensively featured within academic literature. The existing SC studies lack generality in regards to
capturing the entire SC within one methodological framework, which this study aims to address.
Research Impact: A systematic review of the supply chain and simulation literature takes an integrated and
holistic assessment of an E2E SC, from market-demand scenarios through order management and planning
processes, and on to manufacturing and physical distribution. Thus by providing significant advances in
understanding of the theory, methods used and applicability of supply chain simulation, this paper will
further develop a body of knowledge within this subject area.
Practical Impact: The paper will empower practitionersâ knowledge and understanding of the supply chain
processes characteristics that can be modelled using simulation. Moreover it will facilitate a selection of
specific data required for the simulation in accordance to the individual needs of the industry
How effective are heuristic solutions for electricity planning in developing countries
Acknowledgement The first author would like to acknowledge the University of Aberdeen and the Henderson Economics Research Fund for funding his PhD studies in the period 2011-2014 which formed the basis for the research presented in this paper. The first author would also like to acknowledge the Macaulay Development Trust which funds his postdoctoral fellowship with The James Hutton Institute, Aberdeen, Scotland. The authors thank two anonymous referees for valuable comments and suggestions on earlier versions of this paper. All usual caveats applyPeer reviewedPostprin
Risk Adjustment and Reinsurance: A Work Plan for State Officials
Outlines the decisions and actions states need to take to implement the risk adjustment and reinsurance provisions of the 2010 health reform law, including risk adjustment model, reinsurance parameters, stakeholder engagement, and program administration
VELOS : a VR platform for ship-evacuation analysis
Virtual Environment for Life On Ships (VELOS) is a multi-user Virtual Reality (VR) system that aims to support designers to assess (early in the design process) passenger and crew activities on a ship for both normal and hectic conditions of operations and to improve ship design accordingly. This article focuses on presenting the novel features of VELOS related to both its VR and evacuation-specific functionalities. These features include: (i) capability of multiple usersâ immersion and active participation in the evacuation process, (ii) real-time interactivity and capability for making on-the-fly alterations of environment events and crowd-behavior parameters, (iii) capability of agents and avatars to move continuously on decks, (iv) integrated framework for both the simplified and advanced method of analysis according to the IMO/MSC 1033 Circular, (v) enrichment of the ship geometrical model with a topological model suitable for evacuation analysis, (vi) efficient interfaces for the dynamic specification and handling of the required heterogeneous input data, and (vii) post-processing of the calculated agent trajectories for extracting useful information for the evacuation process. VELOS evacuation functionality is illustrated using three evacuation test cases for a roâro passenger ship
Recommended from our members
A survey of simulation techniques in commerce and defence
Despite the developments in Modelling and Simulation (M&S) tools and techniques over the past years, there has been a gap in the M&S research and practice in healthcare on developing a toolkit to assist the modellers and simulation practitioners with selecting an appropriate set of techniques. This study is a preliminary step towards this goal. This paper presents some results from a systematic literature survey on applications of M&S in the commerce and defence domains that could inspire some improvements in the healthcare. Interim results show that in the commercial sector Discrete-Event Simulation (DES) has been the most widely used technique with System Dynamics (SD) in second place. However in the defence sector, SD has gained relatively more attention. SD has been found quite useful for qualitative and soft factors analysis. From both the surveys it becomes clear that there is a growing trend towards using hybrid M&S approaches
- âŠ