Multiuser Millimeter Wave Beamforming Strategies with Quantized and Statistical CSIT

To alleviate the high cost of hardware in mmWave systems, hybrid analog/digital precoding is typically employed. In the conventional two-stage feedback scheme, the analog beamformer is determined by beam search and feedback to maximize the desired signal power of each user. The digital precoder is designed based on quantization and feedback of effective channel to mitigate multiuser interference. Alternatively, we propose a one-stage feedback scheme which effectively reduces the complexity of the signalling and feedback procedure. Specifically, the second-order channel statistics are leveraged to design digital precoder for interference mitigation while all feedback overhead is reserved for precise analog beamforming. Under a fixed total feedback constraint, we investigate the conditions under which the one-stage feedback scheme outperforms the conventional two-stage counterpart. Moreover, a rate splitting (RS) transmission strategy is introduced to further tackle the multiuser interference and enhance the rate performance. Consider (1) RS precoded by the one-stage feedback scheme and (2) conventional transmission strategy precoded by the two-stage scheme with the same first-stage feedback as (1) and also certain amount of extra second-stage feedback. We show that (1) can achieve a sum rate comparable to that of (2). Hence, RS enables remarkable saving in the second-stage training and feedback overhead.Comment: submitted to TW

Rate Splitting for MIMO Wireless Networks: A Promising PHY-Layer Strategy for LTE Evolution

MIMO processing plays a central part towards the recent increase in spectral and energy efficiencies of wireless networks. MIMO has grown beyond the original point-to-point channel and nowadays refers to a diverse range of centralized and distributed deployments. The fundamental bottleneck towards enormous spectral and energy efficiency benefits in multiuser MIMO networks lies in a huge demand for accurate channel state information at the transmitter (CSIT). This has become increasingly difficult to satisfy due to the increasing number of antennas and access points in next generation wireless networks relying on dense heterogeneous networks and transmitters equipped with a large number of antennas. CSIT inaccuracy results in a multi-user interference problem that is the primary bottleneck of MIMO wireless networks. Looking backward, the problem has been to strive to apply techniques designed for perfect CSIT to scenarios with imperfect CSIT. In this paper, we depart from this conventional approach and introduce the readers to a promising strategy based on rate-splitting. Rate-splitting relies on the transmission of common and private messages and is shown to provide significant benefits in terms of spectral and energy efficiencies, reliability and CSI feedback overhead reduction over conventional strategies used in LTE-A and exclusively relying on private message transmissions. Open problems, impact on standard specifications and operational challenges are also discussed.Comment: accepted to IEEE Communication Magazine, special issue on LTE Evolutio

A Hierarchical Rate Splitting Strategy for FDD Massive MIMO under Imperfect CSIT

In a multiuser MIMO broadcast channel, the rate performance is affected by the multiuser interference when the Channel State Information at the Transmitter (CSIT) is imperfect. To tackle the interference problem, a Rate-Splitting (RS) approach has been proposed recently, which splits one user's message into a common and a private part, and superimposes the common message on top of the private messages. The common message is drawn from a public codebook and should be decoded by all users. In this paper, we propose a novel and general framework, denoted as Hierarchical Rate Splitting (HRS), that is particularly suited to FDD massive MIMO systems. HRS simultaneously transmits private messages intended to each user and two kinds of common messages that can be decoded by all users and by a subset of users, respectively. We analyse the asymptotic sum rate of HRS under imperfect CSIT. A closed-form power allocation is derived which provides insights into the effects of system parameters. Finally, simulation results validate the significant sum rate gain of HRS over various baselines.Comment: Accepted paper at IEEE CAMAD 201

Throughput Optimization for Massive MIMO Systems Powered by Wireless Energy Transfer

This paper studies a wireless-energy-transfer (WET) enabled massive multiple-input-multiple-output (MIMO) system (MM) consisting of a hybrid data-and-energy access point (H-AP) and multiple single-antenna users. In the WET-MM system, the H-AP is equipped with a large number $M$ of antennas and functions like a conventional AP in receiving data from users, but additionally supplies wireless power to the users. We consider frame-based transmissions. Each frame is divided into three phases: the uplink channel estimation (CE) phase, the downlink WET phase, as well as the uplink wireless information transmission (WIT) phase. Firstly, users use a fraction of the previously harvested energy to send pilots, while the H-AP estimates the uplink channels and obtains the downlink channels by exploiting channel reciprocity. Next, the H-AP utilizes the channel estimates just obtained to transfer wireless energy to all users in the downlink via energy beamforming. Finally, the users use a portion of the harvested energy to send data to the H-AP simultaneously in the uplink (reserving some harvested energy for sending pilots in the next frame). To optimize the throughput and ensure rate fairness, we consider the problem of maximizing the minimum rate among all users. In the large-$M$ regime, we obtain the asymptotically optimal solutions and some interesting insights for the optimal design of WET-MM system. We define a metric, namely, the massive MIMO degree-of-rate-gain (MM-DoRG), as the asymptotic UL rate normalized by $\log(M)$. We show that the proposed WET-MM system is optimal in terms of MM-DoRG, i.e., it achieves the same MM-DoRG as the case with ideal CE.Comment: 15 double-column pages, 6 figures, 1 table, to appear in IEEE JSAC in February 2015, special issue on wireless communications powered by energy harvesting and wireless energy transfe

Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks

Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are considered as a promising solution for gigabit short range wireless communication systems. IEEE standard 802.11ad, also known as WiGig, is standardized for the usage of the 60 GHz unlicensed band for wireless local area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved to support bandwidth-intensive multimedia applications. Exhaustive search along with beamforming (BF) is usually used to overcome 60 GHz channel propagation loss and accomplish data transmissions in such mmw WLANs. Because of its short range transmission with a high susceptibility to path blocking, multiple number of mmw access points (APs) should be used to fully cover a typical target environment for future high capacity multi-Gbps WLANs. Therefore, coordination among mmw APs is highly needed to overcome packet collisions resulting from un-coordinated exhaustive search BF and to increase the total capacity of mmw WLANs. In this paper, we firstly give the current status of mmw WLANs with our developed WiGig AP prototype. Then, we highlight the great need for coordinated transmissions among mmw APs as a key enabler for future high capacity mmw WLANs. Two different types of coordinated mmw WLAN architecture are introduced. One is the distributed antenna type architecture to realize centralized coordination, while the other is an autonomous coordination with the assistance of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet) architectures are also introduced to efficiently extend the coordinated mmw WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper