3 research outputs found
Stance phase control of above-knee prostheses: Knee control versus SACH foot design
The mobility of above-knee amputees (A/K) is limited, in part, due to the performance of A/K prostheses during the stance phase. Currently stance phase control of most conventional A/K prostheses can only be achieved through leg alignment and choice of the SACH (Solid Ankle Cushioned Heel) foot. This paper examines the role of the knee controller in relation to a SACH foot during the stance phase of level walking.The three-dimensional gait mechanics were measured under two stance phase conditions. In the first set of trials, the amputee used a prosthesis with a conventional knee controller that allowed the amputee to maintain the knee joint in full extension during the stance phase. In the second set of trials, the prosthetic knee, during stance, echoed the modified kinematics of the amputee's sound (intact) knee that had been recorded during the previous sound stance phase.Analysis and interpretation of the data indicate the following: (1) SACH foot design can strongly influence the walking mechanics independent of the knee controller; (2) knee controller design and SACH foot design are mutually interdependent; and (3) normal kinematics imposed on the prosthetic knee does not necessarily produce normal hip kinematics (e.g. reduce the abnormal rise in the prosthetic side hip trajectory). Future research is necessary to explore and exploit the interdependency of prosthetic knee control and foot design.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/26850/1/0000413.pd
Recommended from our members
A Lower Limb Prosthesis with Active Alignment for Reduced Limb Loading
Over the past decade, the growing field of robotics has created new possibilities in lower limb prostheses. The focus of these new prostheses has been replicating the dynamics of the lost limb in order to restore gait of individuals with lower limb amputations to healthy norms. This places demanding loads on the residual limb. Compensation by the rest of body is high, causes overloading of intact joints and can lead to deterioration of mobility and overall health. Abnormalities remain present in the person’s gait, stemming from the loading of soft tissue and the altered anatomy of the affected limb. In this dissertation, an experimental prosthesis is developed with systematic, simulation based techniques. Kinematics and kinetics of the prosthesis design are altered in order to actively realign the limb in relation to the center of pressure during stance, allowing positive power to be generated by the prosthesis while actively reducing the magnitude of the sagittal moment transferred to the residual limb. Initial findings show that during walking with the experimental device compared to a daily use prosthesis, peak pressures on the residual limb are lowered by over 10% while maintaining walking speed