Capacity bounds for MIMO microwave backhaul links affected by phase noise

We present bounds and a closed-form high-SNR expression for the capacity of multiple-antenna systems affected by Wiener phase noise. Our results are developed for the scenario where a single oscillator drives all the radio-frequency circuitries at each transceiver (common oscillator setup), the input signal is subject to a peak-power constraint, and the channel matrix is deterministic. This scenario is relevant for line-of-sight multiple-antenna microwave backhaul links with sufficiently small antenna spacing at the transceivers. For the 2 by 2 multiple-antenna case, for a Wiener phase-noise process with standard deviation equal to 6 degrees, and at the medium/high SNR values at which microwave backhaul links operate, the upper bound reported in the paper exhibits a 3 dB gap from a lower bound obtained using 64-QAM. Furthermore, in this SNR regime the closed-form high-SNR expression is shown to be accurate.Comment: 10 pages, 2 figures, to appear in IEEE Transactions on Communication

On the Capacity of the Wiener Phase-Noise Channel: Bounds and Capacity Achieving Distributions

In this paper, the capacity of the additive white Gaussian noise (AWGN) channel, affected by time-varying Wiener phase noise is investigated. Tight upper and lower bounds on the capacity of this channel are developed. The upper bound is obtained by using the duality approach, and considering a specific distribution over the output of the channel. In order to lower-bound the capacity, first a family of capacity-achieving input distributions is found by solving a functional optimization of the channel mutual information. Then, lower bounds on the capacity are obtained by drawing samples from the proposed distributions through Monte-Carlo simulations. The proposed capacity-achieving input distributions are circularly symmetric, non-Gaussian, and the input amplitudes are correlated over time. The evaluated capacity bounds are tight for a wide range of signal-to-noise-ratio (SNR) values, and thus they can be used to quantify the capacity. Specifically, the bounds follow the well-known AWGN capacity curve at low SNR, while at high SNR, they coincide with the high-SNR capacity result available in the literature for the phase-noise channel.Comment: IEEE Transactions on Communications, 201

Information Rates of ASK-Based Molecular Communication in Fluid Media

This paper studies the capacity of molecular communications in fluid media, where the information is encoded in the number of transmitted molecules in a time-slot (amplitude shift keying). The propagation of molecules is governed by random Brownian motion and the communication is in general subject to inter-symbol interference (ISI). We first consider the case where ISI is negligible and analyze the capacity and the capacity per unit cost of the resulting discrete memoryless molecular channel and the effect of possible practical constraints, such as limitations on peak and/or average number of transmitted molecules per transmission. In the case with a constrained peak molecular emission, we show that as the time-slot duration increases, the input distribution achieving the capacity per channel use transitions from binary inputs to a discrete uniform distribution. In this paper, we also analyze the impact of ISI. Crucially, we account for the correlation that ISI induces between channel output symbols. We derive an upper bound and two lower bounds on the capacity in this setting. Using the input distribution obtained by an extended Blahut-Arimoto algorithm, we maximize the lower bounds. Our results show that, over a wide range of parameter values, the bounds are close.Comment: 31 pages, 8 figures, Accepted for publication on IEEE Transactions on Molecular, Biological, and Multi-Scale Communication

The Binary Energy Harvesting Channel with a Unit-Sized Battery

We consider a binary energy harvesting communication channel with a finite-sized battery at the transmitter. In this model, the channel input is constrained by the available energy at each channel use, which is driven by an external energy harvesting process, the size of the battery, and the previous channel inputs. We consider an abstraction where energy is harvested in binary units and stored in a battery with the capacity of a single unit, and the channel inputs are binary. Viewing the available energy in the battery as a state, this is a state-dependent channel with input-dependent states, memory in the states, and causal state information available at the transmitter only. We find an equivalent representation for this channel based on the timings of the symbols, and determine the capacity of the resulting equivalent timing channel via an auxiliary random variable. We give achievable rates based on certain selections of this auxiliary random variable which resemble lattice coding for the timing channel. We develop upper bounds for the capacity by using a genie-aided method, and also by quantifying the leakage of the state information to the receiver. We show that the proposed achievable rates are asymptotically capacity achieving for small energy harvesting rates. We extend the results to the case of ternary channel inputs. Our achievable rates give the capacity of the binary channel within 0.03 bits/channel use, the ternary channel within 0.05 bits/channel use, and outperform basic Shannon strategies that only consider instantaneous battery states, for all parameter values.Comment: Submitted to IEEE Transactions on Information Theory, August 201

Capacity of Underspread Noncoherent WSSUS Fading Channels under Peak Signal Constraints

We characterize the capacity of the general class of noncoherent underspread wide-sense stationary uncorrelated scattering (WSSUS) time-frequency-selective Rayleigh fading channels, under peak constraints in time and frequency and in time only. Capacity upper and lower bounds are found which are explicit in the channel's scattering function and allow to identify the capacity-maximizing bandwidth for a given scattering function and a given peak-to-average power ratio.Comment: To be presented at IEEE Int. Symp. Inf. Theory 2007, Nice, Franc