9,368 research outputs found
A mosaic of eyes
Autonomous navigation is a traditional research topic in intelligent robotics and vehicles, which requires a robot to perceive its environment through onboard sensors such as cameras or laser scanners, to enable it to drive to its goal. Most research to date has focused on the development of a large and smart brain to gain autonomous capability for robots. There are three fundamental questions to be answered by an autonomous mobile robot: 1) Where am I going? 2) Where am I? and 3) How do I get there? To answer these basic questions, a robot requires a massive spatial memory and considerable computational resources to accomplish perception, localization, path planning, and control. It is not yet possible to deliver the centralized intelligence required for our real-life applications, such as autonomous ground vehicles and wheelchairs in care centers. In fact, most autonomous robots try to mimic how humans navigate, interpreting images taken by cameras and then taking decisions accordingly. They may encounter the following difficulties
UAV/UGV Autonomous Cooperation: UAV Assists UGV to Climb a Cliff by Attaching a Tether
This paper proposes a novel cooperative system for an Unmanned Aerial Vehicle
(UAV) and an Unmanned Ground Vehicle (UGV) which utilizes the UAV not only as a
flying sensor but also as a tether attachment device. Two robots are connected
with a tether, allowing the UAV to anchor the tether to a structure located at
the top of a steep terrain, impossible to reach for UGVs. Thus, enhancing the
poor traversability of the UGV by not only providing a wider range of scanning
and mapping from the air, but also by allowing the UGV to climb steep terrains
with the winding of the tether. In addition, we present an autonomous framework
for the collaborative navigation and tether attachment in an unknown
environment. The UAV employs visual inertial navigation with 3D voxel mapping
and obstacle avoidance planning. The UGV makes use of the voxel map and
generates an elevation map to execute path planning based on a traversability
analysis. Furthermore, we compared the pros and cons of possible methods for
the tether anchoring from multiple points of view. To increase the probability
of successful anchoring, we evaluated the anchoring strategy with an
experiment. Finally, the feasibility and capability of our proposed system were
demonstrated by an autonomous mission experiment in the field with an obstacle
and a cliff.Comment: 7 pages, 8 figures, accepted to 2019 International Conference on
Robotics & Automation. Video: https://youtu.be/UzTT8Ckjz1
Robot Impedance Control and Passivity Analysis with Inner Torque and Velocity Feedback Loops
Impedance control is a well-established technique to control interaction
forces in robotics. However, real implementations of impedance control with an
inner loop may suffer from several limitations. Although common practice in
designing nested control systems is to maximize the bandwidth of the inner loop
to improve tracking performance, it may not be the most suitable approach when
a certain range of impedance parameters has to be rendered. In particular, it
turns out that the viable range of stable stiffness and damping values can be
strongly affected by the bandwidth of the inner control loops (e.g. a torque
loop) as well as by the filtering and sampling frequency. This paper provides
an extensive analysis on how these aspects influence the stability region of
impedance parameters as well as the passivity of the system. This will be
supported by both simulations and experimental data. Moreover, a methodology
for designing joint impedance controllers based on an inner torque loop and a
positive velocity feedback loop will be presented. The goal of the velocity
feedback is to increase (given the constraints to preserve stability) the
bandwidth of the torque loop without the need of a complex controller.Comment: 14 pages in Control Theory and Technology (2016
A model-based residual approach for human-robot collaboration during manual polishing operations
A fully robotized polishing of metallic surfaces may be insufficient in case of parts with complex geometric shapes, where a manual intervention is still preferable. Within the EU SYMPLEXITY project, we are considering tasks where manual polishing operations are performed in strict physical Human-Robot Collaboration (HRC) between a robot holding the part and a human operator equipped with an abrasive tool. During the polishing task, the robot should firmly keep the workpiece in a prescribed sequence of poses, by monitoring and resisting to the external forces applied by the operator. However, the user may also wish to change the orientation of the part mounted on the robot, simply by pushing or pulling the robot body and changing thus its configuration. We propose a control algorithm that is able to distinguish the external torques acting at the robot joints in two components, one due to the polishing forces being applied at the end-effector level, the other due to the intentional physical interaction engaged by the human. The latter component is used to reconfigure the manipulator arm and, accordingly, its end-effector orientation. The workpiece position is kept instead fixed, by exploiting the intrinsic redundancy of this subtask. The controller uses a F/T sensor mounted at the robot wrist, together with our recently developed model-based technique (the residual method) that is able to estimate online the joint torques due to contact forces/torques applied at any place along the robot structure. In order to obtain a reliable residual, which is necessary to implement the control algorithm, an accurate robot dynamic model (including also friction effects at the joints and drive gains) needs to be identified first. The complete dynamic identification and the proposed control method for the human-robot collaborative polishing task are illustrated on a 6R UR10 lightweight manipulator mounting an ATI 6D sensor
- …