Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

Marker based Thermal-Inertial Localization for Aerial Robots in Obscurant Filled Environments

For robotic inspection tasks in known environments fiducial markers provide a reliable and low-cost solution for robot localization. However, detection of such markers relies on the quality of RGB camera data, which degrades significantly in the presence of visual obscurants such as fog and smoke. The ability to navigate known environments in the presence of obscurants can be critical for inspection tasks especially, in the aftermath of a disaster. Addressing such a scenario, this work proposes a method for the design of fiducial markers to be used with thermal cameras for the pose estimation of aerial robots. Our low cost markers are designed to work in the long wave infrared spectrum, which is not affected by the presence of obscurants, and can be affixed to any object that has measurable temperature difference with respect to its surroundings. Furthermore, the estimated pose from the fiducial markers is fused with inertial measurements in an extended Kalman filter to remove high frequency noise and error present in the fiducial pose estimates. The proposed markers and the pose estimation method are experimentally evaluated in an obscurant filled environment using an aerial robot carrying a thermal camera.Comment: 10 pages, 5 figures, Published in International Symposium on Visual Computing 201

Robots for Exploration, Digital Preservation and Visualization of Archeological Sites

Monitoring and conservation of archaeological sites are important activities necessary to prevent damage or to perform restoration on cultural heritage. Standard techniques, like mapping and digitizing, are typically used to document the status of such sites. While these task are normally accomplished manually by humans, this is not possible when dealing with hard-to-access areas. For example, due to the possibility of structural collapses, underground tunnels like catacombs are considered highly unstable environments. Moreover, they are full of radioactive gas radon that limits the presence of people only for few minutes. The progress recently made in the artificial intelligence and robotics field opened new possibilities for mobile robots to be used in locations where humans are not allowed to enter. The ROVINA project aims at developing autonomous mobile robots to make faster, cheaper and safer the monitoring of archaeological sites. ROVINA will be evaluated on the catacombs of Priscilla (in Rome) and S. Gennaro (in Naples)

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

Present and Future of SLAM in Extreme Underground Environments

This paper reports on the state of the art in underground SLAM by discussing different SLAM strategies and results across six teams that participated in the three-year-long SubT competition. In particular, the paper has four main goals. First, we review the algorithms, architectures, and systems adopted by the teams; particular emphasis is put on lidar-centric SLAM solutions (the go-to approach for virtually all teams in the competition), heterogeneous multi-robot operation (including both aerial and ground robots), and real-world underground operation (from the presence of obscurants to the need to handle tight computational constraints). We do not shy away from discussing the dirty details behind the different SubT SLAM systems, which are often omitted from technical papers. Second, we discuss the maturity of the field by highlighting what is possible with the current SLAM systems and what we believe is within reach with some good systems engineering. Third, we outline what we believe are fundamental open problems, that are likely to require further research to break through. Finally, we provide a list of open-source SLAM implementations and datasets that have been produced during the SubT challenge and related efforts, and constitute a useful resource for researchers and practitioners.Comment: 21 pages including references. This survey paper is submitted to IEEE Transactions on Robotics for pre-approva

Autonomous Planning and Mapping for the Characterization of Gamma Contaminated Environments

The past $100$ years of research and development in the fields of nuclear power, weapons, and industrial radiation applications have imbibed regions across the world with facilities and terrain which is contaminated with radioactive material. Such locations can pose significant hazards to human health, thus requiring vigilant monitoring and mitigation efforts. The use of autonomous robots is well suited to this task. Motivated by this fact, this work contributes a holistic perspective on the deployment, design, and use of autonomous robots for the characterization of radioactively contaminated environments. The set of developments presented in this dissertation incorporate principles of gamma radiation detection and measurement, techniques for mapping and localizing a variety of radioactive sources, path planning strategies tailored to both ground and aerial platforms, as well as prototype systems implementing methods for perception and navigation in dirty, dangerous, and degraded conditions. Specifically, Chapter \ref{chap:intro} presents the motivation behind this work, including its practical application, as well as a brief description of the approach utilized to accomplish environmental radiation characterization. Chapter \ref{chap:contrib} presents a detailed overview of the presented radiation mapping contributions and associated publications in addition to a brief note on other synergistic contributions made towards enabling autonomy in the perceptually degraded environments associated in particular with waste decommissioning facilities. Subsequently the core contributions of this thesis are presented in detail. Chapter \ref{chap:single_source} presents a method for autonomous single source localization using an aerial robot, alongside details regarding principles of radiation measurement and detection. Chapter \ref{chap:radbot} describes a technique developed to map distributed radiation fields in 2D using a ground platform, while Chapter \ref{chap:radmf} extends the work to perform the mapping task in 3D using a collision tolerant micro aerial vehicle. Subsequently, Chapter \ref{chap:auro} presents autonomous distributed 3D radiation mapping coupled with an intelligent path planning algorithm tailored to source seeking behaviors in confined environments. Finally, conclusions and an outlook for future research are discussed in Chapter \ref{chap:conclusions}.Overall, this dissertation contributes a body of work enabling autonomous radiological surveying in challenging conditions, demonstrating robust functionality through a series of field experiments using real radiation sources. Each of the presented methods is associated with a tested and reliable robotic system purpose-built for its designated task. This combination of performance robotic hardware demonstrating novel autonomous functionality in realistic use-case scenarios showcases the applicability and dependability of the presented systems and methods