8,418 research outputs found
RCFD: A Novel Channel Access Scheme for Full-Duplex Wireless Networks Based on Contention in Time and Frequency Domains
In the last years, the advancements in signal processing and integrated
circuits technology allowed several research groups to develop working
prototypes of in-band full-duplex wireless systems. The introduction of such a
revolutionary concept is promising in terms of increasing network performance,
but at the same time poses several new challenges, especially at the MAC layer.
Consequently, innovative channel access strategies are needed to exploit the
opportunities provided by full-duplex while dealing with the increased
complexity derived from its adoption. In this direction, this paper proposes
RTS/CTS in the Frequency Domain (RCFD), a MAC layer scheme for full-duplex ad
hoc wireless networks, based on the idea of time-frequency channel contention.
According to this approach, different OFDM subcarriers are used to coordinate
how nodes access the shared medium. The proposed scheme leads to efficient
transmission scheduling with the result of avoiding collisions and exploiting
full-duplex opportunities. The considerable performance improvements with
respect to standard and state-of-the-art MAC protocols for wireless networks
are highlighted through both theoretical analysis and network simulations.Comment: Submitted at IEEE Transactions on Mobile Computing. arXiv admin note:
text overlap with arXiv:1605.0971
Nap: Practical Micro-Sleeps for 802.11 WLANs
In this paper, we revisit the idea of putting interfaces to sleep during
'packet overhearing' (i.e., when there are ongoing transmissions addressed to
other stations) from a practical standpoint. To this aim, we perform a robust
experimental characterisation of the timing and consumption behaviour of a
commercial 802.11 card. We design Nap, a local standard-compliant
energy-saving mechanism that leverages micro-sleep opportunities inherent to
the CSMA operation of 802.11 WLANs. This mechanism is backwards compatible and
incrementally deployable, and takes into account the timing limitations of
existing hardware, as well as practical CSMA-related issues (e.g., capture
effect). According to the performance assessment carried out through
trace-based simulation, the use of our scheme would result in a 57% reduction
in the time spent in overhearing, thus leading to an energy saving of 15.8% of
the activity time.Comment: 15 pages, 12 figure
Powertrace: Network-level Power Profiling for Low-power Wireless Networks
Low-power wireless networks are quickly becoming a critical part of our everyday infrastructure. Power consumption is a critical concern, but power measurement and estimation is a challenge. We present Powertrace,
which to the best of our knowledge is the first system for network-level power profiling of low-power wireless systems. Powertrace uses power state tracking to estimate system power consumption and a structure called energy capsules to attribute energy consumption to activities such as packet transmissions and receptions. With Powertrace, the power consumption of a system can be broken down into individual activities which allows us to answer questions such as “How much energy is spent forwarding packets for node X?”, “How much energy
is spent on control traffic and how much on critical data?”, and “How much energy does application X account for?”. Experiments show that Powertrace is accurate to 94% of the energy consumption of a device. To
demonstrate the usefulness of Powertrace, we use it to experimentally analyze the power behavior of the proposed IETF standard IPv6 RPL routing protocol and a sensor network data collection protocol. Through using Powertrace, we find the highest power consumers and are
able to reduce the power consumption of data collection with 24%. It is our hope that Powertrace will help the community to make empirical energy evaluation a widely used tool in the low-power wireless research community toolbox
Coordinated Dynamic Spectrum Management of LTE-U and Wi-Fi Networks
This paper investigates the co-existence of Wi-Fi and LTE in emerging
unlicensed frequency bands which are intended to accommodate multiple radio
access technologies. Wi-Fi and LTE are the two most prominent access
technologies being deployed today, motivating further study of the inter-system
interference arising in such shared spectrum scenarios as well as possible
techniques for enabling improved co-existence. An analytical model for
evaluating the baseline performance of co-existing Wi-Fi and LTE is developed
and used to obtain baseline performance measures. The results show that both
Wi-Fi and LTE networks cause significant interference to each other and that
the degradation is dependent on a number of factors such as power levels and
physical topology. The model-based results are partially validated via
experimental evaluations using USRP based SDR platforms on the ORBIT testbed.
Further, inter-network coordination with logically centralized radio resource
management across Wi-Fi and LTE systems is proposed as a possible solution for
improved co-existence. Numerical results are presented showing significant
gains in both Wi-Fi and LTE performance with the proposed inter-network
coordination approach.Comment: Accepted paper at IEEE DySPAN 201
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
Survey on wireless technology trade-offs for the industrial internet of things
Aside from vast deployment cost reduction, Industrial Wireless Sensor and Actuator Networks (IWSAN) introduce a new level of industrial connectivity. Wireless connection of sensors and actuators in industrial environments not only enables wireless monitoring and actuation, it also enables coordination of production stages, connecting mobile robots and autonomous transport vehicles, as well as localization and tracking of assets. All these opportunities already inspired the development of many wireless technologies in an effort to fully enable Industry 4.0. However, different technologies significantly differ in performance and capabilities, none being capable of supporting all industrial use cases. When designing a network solution, one must be aware of the capabilities and the trade-offs that prospective technologies have. This paper evaluates the technologies potentially suitable for IWSAN solutions covering an entire industrial site with limited infrastructure cost and discusses their trade-offs in an effort to provide information for choosing the most suitable technology for the use case of interest. The comparative discussion presented in this paper aims to enable engineers to choose the most suitable wireless technology for their specific IWSAN deployment
- …