31,053 research outputs found
EMEEDP: Enhanced Multi-hop Energy Efficient Distributed Protocol for Heterogeneous Wireless Sensor Network
In WSN (Wireless Sensor Network) every sensor node sensed the data and
transmit it to the CH (Cluster head) or BS (Base Station). Sensors are randomly
deployed in unreachable areas, where battery replacement or battery charge is
not possible. For this reason, Energy conservation is the important design goal
while developing a routing and distributed protocol to increase the lifetime of
WSN. In this paper, an enhanced energy efficient distributed protocol for
heterogeneous WSN have been reported. EMEEDP is proposed for heterogeneous WSN
to increase the lifetime of the network. An efficient algorithm is proposed in
the form of flowchart and based on various clustering equation proved that the
proposed work accomplishes longer lifetime with improved QOS parameters
parallel to MEEP. A WSN implemented and tested using Raspberry Pi devices as a
base station, temperature sensors as a node and xively.com as a cloud. Users
use data for decision purpose or business purposes from xively.com using
internet.Comment: 6 pages, 4 figures. arXiv admin note: substantial text overlap with
arXiv:1409.1412 by other author
A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System
Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patientâs measurements in reliable e-Health ecosystem.
As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres.
Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ââPriority Based-Fair Queuingââ (PFQ) where a new priority level and concept of ââPatientâs Health Recordââ (PHR) has been developed and
integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ).
PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases.
Thus, a derivative from the PFQ model has been developed to create a new version namely âPriority Based-Fair Queuing-Tolerated Delayâ (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model
M-ATTEMPT: A New Energy-Efficient Routing Protocol for Wireless Body Area Sensor Networks
In this paper, we propose a new routing protocol for heterogeneous Wireless
Body Area Sensor Networks (WBASNs); Mobility-supporting Adaptive
Threshold-based Thermal-aware Energy-efficientMulti-hop ProTocol (M-ATTEMPT). A
prototype is defined for employing heterogeneous sensors on human body. Direct
communication is used for real-time traffic (critical data) or on-demand data
while Multi-hop communication is used for normal data delivery. One of the
prime challenges in WBASNs is sensing of the heat generated by the implanted
sensor nodes. The proposed routing algorithm is thermal-aware which senses the
link Hot-spot and routes the data away from these links. Continuous mobility of
human body causes disconnection between previous established links. So,
mobility support and energy-management is introduced to overcome the problem.
Linear Programming (LP) model for maximum information extraction and minimum
energy consumption is presented in this study. MATLAB simulations of proposed
routing algorithm are performed for lifetime and successful packet delivery in
comparison with Multi-hop communication. The results show that the proposed
routing algorithm has less energy consumption and more reliable as compared to
Multi-hop communication.Comment: arXiv admin note: substantial text overlap with arXiv:1208.609
Unified clustering and communication protocol for wireless sensor networks
In this paper we present an energy-efficient cross layer protocol for providing application specific reservations in wireless senor networks called the âUnified Clustering and Communication Protocol â (UCCP). Our modular cross layered framework satisfies three wireless sensor network requirements, namely, the QoS requirement of heterogeneous applications, energy aware clustering and data forwarding by relay sensor nodes. Our unified design approach is motivated by providing an integrated and viable solution for self organization and end-to-end communication is wireless sensor networks. Dynamic QoS based reservation guarantees are provided using a reservation-based TDMA approach. Our novel energy-efficient clustering approach employs a multi-objective optimization technique based on OR (operations research) practices. We adopt a simple hierarchy in which relay nodes forward data messages from cluster head to the sink, thus eliminating the overheads needed to maintain a routing protocol. Simulation results demonstrate that UCCP provides an energy-efficient and scalable solution to meet the application specific QoS demands in resource constrained sensor nodes. Index Terms â wireless sensor networks, unified communication, optimization, clustering and quality of service
- âŠ