4,300 research outputs found
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Rationale for and design of a generic tiled hierarchical phased array beamforming architecture
The purpose of the phased array beamforming project is to develop a generic flexible efficient phased array receiver platform, using a mixed signal hardware/software-codesign approach. The results will be applicable to any radio (RF) system, but we will focus on satellite receiver (DVB-S) and radar applications. We will present a preliminary mapping of beamforming processing on a tiled architecture and determine its scalability.\ud
\ud
The functionality, size and cost constraints imply an integrated mixed signal CMOS solution. For a generic flexible multi-standard solution, a software defined radio approach is taken. Because a scalable and dependable solution is needed, a tiled hierarchical architecture is proposed with reconfigurable hardware to regain flexibility. A mapping is provided of beamforming on the proposed architecture. The advantages and disadvantages of each solution are discussed with respect to applicability and scalability.\ud
\ud
Different beamforming processing solutions can be mapped on the same proposed tiled hierarchical architecture. This provides a flexible, scalable and reconfigurable solution for a wide application domain. Beamforming is a data-driven streaming process which lends itself well for a regular scalable architecture. Beamsteering on the other hand is much more control-oriented and future work will focus on how to support beamsteering on the proposed architecture as well
People-Sensing Spatial Characteristics of RF Sensor Networks
An "RF sensor" network can monitor RSS values on links in the network and
perform device-free localization, i.e., locating a person or object moving in
the area in which the network is deployed. This paper provides a statistical
model for the RSS variance as a function of the person's position w.r.t. the
transmitter (TX) and receiver (RX). We show that the ensemble mean of the RSS
variance has an approximately linear relationship with the expected total
affected power (ETAP). We then use analysis to derive approximate expressions
for the ETAP as a function of the person's position, for both scattering and
reflection. Counterintuitively, we show that reflection, not scattering, causes
the RSS variance contours to be shaped like Cassini ovals. Experimental tests
reported here and in past literature are shown to validate the analysis
IoT-Based Tracking System of Transceiver Location
Object mapping based on location tracking methods has been widely used in various types of applications. Most tracking systems recently use existing technology and infrastructure such as satellite, cellular and wireless (RF) technology. These existing technologies are high-cost technology that needs authorized permission to be integrated to the novel technology. This research proposed a cheap point to point device technology to track a location of a transceiver using GPS in a portable infrastructure using Line of sight radio communication. The tracking system design is connected to the IoT system in order to be more accessible. The proposed system using GPS as an identifier of the transceiver coordinate location and 433MHz radio module as media communication between transmitter and receiver. The use of a 433MHz radio frequency module which is free-license adds value to the system so that it will be easily accessed. The design of portable and internet-based devices also gives a positive value in which the system does not have to depend on existing infrastructure and the system can also be reached even if it is placed in remote areas. The system test results show that the system can be well accessed up to a distance of 6.8 km
Breathfinding: A Wireless Network that Monitors and Locates Breathing in a Home
This paper explores using RSS measurements on many links in a wireless
network to estimate the breathing rate of a person, and the location where the
breathing is occurring, in a home, while the person is sitting, laying down,
standing, or sleeping. The main challenge in breathing rate estimation is that
"motion interference", i.e., movements other than a person's breathing,
generally cause larger changes in RSS than inhalation and exhalation. We
develop a method to estimate breathing rate despite motion interference, and
demonstrate its performance during multiple short (3-7 minute) tests and during
a longer 66 minute test. Further, for the same experiments, we show the
location of the breathing person can be estimated, to within about 2 m average
error in a 56 square meter apartment. Being able to locate a breathing person
who is not otherwise moving, without calibration, is important for applications
in search and rescue, health care, and security
- …