1,039 research outputs found

    A Comparison of CP-OFDM, PCC-OFDM and UFMC for 5G Uplink Communications

    Full text link
    Polynomial-cancellation-coded orthogonal frequency division multiplexing (PCC-OFDM) is a form of OFDM that has waveforms which are very well localized in both the time and frequency domains and so it is ideally suited for use in the 5G network. This paper analyzes the performance of PCC-OFDM in the uplink of a multiuser system using orthogonal frequency division multiple access (OFDMA) and compares it with conventional cyclic prefix OFDM (CP-OFDM), and universal filtered multicarrier (UFMC). PCC-OFDM is shown to be much less sensitive than either CP-OFDM or UFMC to time and frequency offsets. For a given constellation size, PCC-OFDM in additive white Gaussian noise (AWGN) requires 3dB lower signal-to-noise ratio (SNR) for a given bit-error-rate, and the SNR advantage of PCC-OFDM increases rapidly when there are timing and/or frequency offsets. For PCC-OFDM no frequency guard band is required between different OFDMA users. PCC-OFDM is completely compatible with CP-OFDM and adds negligible complexity and latency, as it uses a simple mapping of data onto pairs of subcarriers at the transmitter, and a simple weighting-and-adding of pairs of subcarriers at the receiver. The weighting and adding step, which has been omitted in some of the literature, is shown to contribute substantially to the SNR advantage of PCC-OFDM. A disadvantage of PCC-OFDM (without overlapping) is the potential reduction in spectral efficiency because subcarriers are modulated in pairs, but this reduction is more than regained because no guard band or cyclic prefix is required and because, for a given channel, larger constellations can be used

    Performance analysis and optimization of DCT-based multicarrier system on frequency-selective fading channels

    Get PDF
    Regarded as one of the most promising transmission techniques for future wireless communications, the discrete cosine transform (DCT) based multicarrier modulation (MCM) system employs cosine basis as orthogonal functions for real-modulated symbols multiplexing, by which the minimum orthogonal frequency spacing can be reduced by half compared to discrete Fourier transform (DFT) based one. With a time-reversed pre-filter employed at the front of the receiver, interference-free one-tap equalization is achievable for the DCT-based systems. However, due to the correlated pre-filtering operation in time domain, the signal-to-noise ratio (SNR) is enhanced as a result at the output. This leads to reformulated detection criterion to compensate for such filtering effect, rendering minimum-mean-square-error (MMSE) and maximum likelihood (ML) detections applicable to the DCT-based multicarrier system. In this paper, following on the pre-filtering based DCT-MCM model that build in the literature work, we extend the overall system by considering both transceiver perfections and imperfections, where frequency offset, time offset and insufficient guard sequence are included. In the presence of those imperfection errors, the DCT-MCM systems are analysed in terms of desired signal power, inter-carrier interference (ICI) and inter-symbol interference (ISI). Thereafter, new detection algorithms based on zero forcing (ZF) iterative results are proposed to mitigate the imperfection effect. Numerical results show that the theoretical analysis match the simulation results, and the proposed iterative detection algorithms are able to improve the overall system performance significantly

    ICI Reduction Methods in OFDM Systems

    Get PDF

    Performance Analysis of a signal by removing ICI using Kalman Filter for OFDM Channel

    Get PDF
    The OFDM communication is very much inspired from the channel frequencies over the network. In such network some kind of orthogonal di stortion occur over the channel called Inter carrier Interference. Here we will improve the ICI using Kalman Filtering improv ed by using repetitive slot and correlated channel tap. The Kalman Filter is been improved by implementing the two stage kalman fil ter. In first stage the Kalman based statistical analysis is performed to estimate the PAPR and the respective Phase variated PAPR reduction is performed. In second stage the ICI reduction is performed by implementing the Kalman filter based carrier offset values. The proposed work of this paper is when data travel over some channel it suffers from the problem of interference. The interf erence results the high signal to noise ratio as well as high bit error rate. The proposed system will improved the si gnal by removing the different kind of impurities over the signal. These impurities includes the ICI, PAPR and the noise over the signal. The signal will be more ef fective than standard OFDM. S o we neednt many pilot symbols in practice, still can ensure the algorithm performance and reduce the time - delay and complexity of this algorith
    • …
    corecore