A Survey on Delay-Aware Resource Control for Wireless Systems --- Large Deviation Theory, Stochastic Lyapunov Drift and Distributed Stochastic Learning

In this tutorial paper, a comprehensive survey is given on several major systematic approaches in dealing with delay-aware control problems, namely the equivalent rate constraint approach, the Lyapunov stability drift approach and the approximate Markov Decision Process (MDP) approach using stochastic learning. These approaches essentially embrace most of the existing literature regarding delay-aware resource control in wireless systems. They have their relative pros and cons in terms of performance, complexity and implementation issues. For each of the approaches, the problem setup, the general solution and the design methodology are discussed. Applications of these approaches to delay-aware resource allocation are illustrated with examples in single-hop wireless networks. Furthermore, recent results regarding delay-aware multi-hop routing designs in general multi-hop networks are elaborated. Finally, the delay performance of the various approaches are compared through simulations using an example of the uplink OFDMA systems.Comment: 58 pages, 8 figures; IEEE Transactions on Information Theory, 201

Optimal scheduling and fair servicepolicy for STDMA in underwater networks with acoustic communications

In this work, a multi-hop string network with a single sink node is analyzed. A periodic optimal scheduling for TDMA operation that considers the characteristic long propagation delay of the underwater acoustic channel is presented. This planning of transmissions is obtained with the help of a new geometrical method based on a 2D lattice in the space-time domain. In order to evaluate the performance of this optimal scheduling, two service policies have been compared: FIFO and Round-Robin. Simulation results, including achievable throughput, packet delay, and queue length, are shown. The network fairness has also been quantified with the Gini index

Low-latency Networking: Where Latency Lurks and How to Tame It

While the current generation of mobile and fixed communication networks has been standardized for mobile broadband services, the next generation is driven by the vision of the Internet of Things and mission critical communication services requiring latency in the order of milliseconds or sub-milliseconds. However, these new stringent requirements have a large technical impact on the design of all layers of the communication protocol stack. The cross layer interactions are complex due to the multiple design principles and technologies that contribute to the layers' design and fundamental performance limitations. We will be able to develop low-latency networks only if we address the problem of these complex interactions from the new point of view of sub-milliseconds latency. In this article, we propose a holistic analysis and classification of the main design principles and enabling technologies that will make it possible to deploy low-latency wireless communication networks. We argue that these design principles and enabling technologies must be carefully orchestrated to meet the stringent requirements and to manage the inherent trade-offs between low latency and traditional performance metrics. We also review currently ongoing standardization activities in prominent standards associations, and discuss open problems for future research

Impact of N-Policy on Quality of Service for Energy Efficient Wireless Sensor Networks

Wireless Sensor Networks (WSNs) have attracted attention from both academia and industry since the late 90\u27s. Recent advancements in the technology of microelectromechanical systems (MEMS), the fields of digital electronics, and in wireless communication have resulted in the reductions of both the size and cost of sensor nodes. Even so, there are still some constraints on the performance of WSNs. The two most important constraints are the limited power supply in the sensor nodes and the difficulty in recharging or replacing their batteries. Therefore, reducing the energy consumption of Pensor nodes and optimizing the lifetime of WSNs are crucial. Wireless sensor networks have explored many new protocols, various approaches have been taken to design energy-efficient wireless sensor networks (EEWSNs). In this work, we conducted research on a packet queueing management model that offers different quality of services for packets coming from different sources. This model also incorporate N-policy to minimize excessive switching of transmission radio to conserve battery energy. In our daily life, we often experience waiting in a queue to receive some kind of service. Some customers do not join the queue at the end like other normal customers, and try to cut in the queue hoping to have a shorter waiting time and a higher level of satisfaction. This behavior is called customer interjection. First-come- first-served (FCFS) service discipline is usually assumed in public places like restaurants, banks, airports, and supermarkets. However, customer interjections can still be seen in these places. These interjections can affect the waiting time of other customers in queue. Such interjections may reduce the waiting time of interjecting customers, but increase the waiting time and of others. To control a queueing system, implementing a priority mechanism is a sensible approach. For example, at the airport, customers are categorized in to VIP and general customers. VIP customer has shorter lines and tailored services where as general customer usually stand in line longer and process takes longer to finish too. Priority queue management becomes more important in telecommunication systems also in computer systems (e.g. operating systems) they have been exploited for a long time. Priority queueing control is also used in other production practices. In this research we proposed a queue management model that has a priority queue and a normal queue at the same time. Our proposed model will service priority packets first then turn around to process normal packet until both queues are empty then turn off the radio. This seemingly simple design yields a complex set of balance equations. After solving all the equations with the help of probability generating functions we got the expected queue length for two queues

A Priority Rate-Based Routing Protocol for wireless multimedia sensor networks

The development of affordable hardware has made it possible to transmit multimedia data over a wireless medium using sensor devices. Deployed sensors span larger geographical areas, generating different kinds of traffic that need to be communicated either in real-time or non-real-time mode to the sink. The tiny sized design of sensor nodes has made them even more attractive in various environments as they can be left unattended for longer periods. Since sensor nodes are equipped with limited resources, newer energy-efficient protocols and architectures are required in order to meet requirements within their limited capabilities when dealing with multimedia data. This is because multimedia applications are characterized by strict quality of service requirements that distinctively differentiate them from other data types during transmission. However, the large volume of data produced by the sensor nodes can easily cause traffic congestion making it difficult to meet these requirements. Congestion has negative impacts on the data transmitted as well as the sensor network at large. Failure to control congestion will affect the quality of multimedia data received at the sink and further shorten the system lifetime. Next generation wireless sensor networks are predicted to deploy a different model where service is allocated to multimedia while bearing congestion in mind. Applying traditional wireless sensor routing algorithms to wireless multimedia sensor networks may lead to high delay and poor visual quality for multimedia applications. In this research, a Priority Rate-Based Routing Protocol (PRRP) that assigns priorities to traffic depending on their service requirements is proposed. PRRP detects congestion by using adaptive random early detection (A-RED) and a priority rate-based adjustment technique to control congestion. We study the performance of our proposed multi-path routing algorithm for real-time traffic when mixed with three non real-time traffic each with a different priority: high, medium or low. Simulation results show that the proposed algorithm performs better when compared to two existing algorithms, PCCP and PBRC-SD, in terms of queueing delay, packet loss and throughput

A Priority-based Fair Queuing (PFQ) Model for Wireless Healthcare System

Healthcare is a very active research area, primarily due to the increase in the elderly population that leads to increasing number of emergency situations that require urgent actions. In recent years some of wireless networked medical devices were equipped with different sensors to measure and report on vital signs of patient remotely. The most important sensors are Heart Beat Rate (ECG), Pressure and Glucose sensors. However, the strict requirements and real-time nature of medical applications dictate the extreme importance and need for appropriate Quality of Service (QoS), fast and accurate delivery of a patient’s measurements in reliable e-Health ecosystem. As the elderly age and older adult population is increasing (65 years and above) due to the advancement in medicine and medical care in the last two decades; high QoS and reliable e-health ecosystem has become a major challenge in Healthcare especially for patients who require continuous monitoring and attention. Nevertheless, predictions have indicated that elderly population will be approximately 2 billion in developing countries by 2050 where availability of medical staff shall be unable to cope with this growth and emergency cases that need immediate intervention. On the other side, limitations in communication networks capacity, congestions and the humongous increase of devices, applications and IOT using the available communication networks add extra layer of challenges on E-health ecosystem such as time constraints, quality of measurements and signals reaching healthcare centres. Hence this research has tackled the delay and jitter parameters in E-health M2M wireless communication and succeeded in reducing them in comparison to current available models. The novelty of this research has succeeded in developing a new Priority Queuing model ‘’Priority Based-Fair Queuing’’ (PFQ) where a new priority level and concept of ‘’Patient’s Health Record’’ (PHR) has been developed and integrated with the Priority Parameters (PP) values of each sensor to add a second level of priority. The results and data analysis performed on the PFQ model under different scenarios simulating real M2M E-health environment have revealed that the PFQ has outperformed the results obtained from simulating the widely used current models such as First in First Out (FIFO) and Weight Fair Queuing (WFQ). PFQ model has improved transmission of ECG sensor data by decreasing delay and jitter in emergency cases by 83.32% and 75.88% respectively in comparison to FIFO and 46.65% and 60.13% with respect to WFQ model. Similarly, in pressure sensor the improvements were 82.41% and 71.5% and 68.43% and 73.36% in comparison to FIFO and WFQ respectively. Data transmission were also improved in the Glucose sensor by 80.85% and 64.7% and 92.1% and 83.17% in comparison to FIFO and WFQ respectively. However, non-emergency cases data transmission using PFQ model was negatively impacted and scored higher rates than FIFO and WFQ since PFQ tends to give higher priority to emergency cases. Thus, a derivative from the PFQ model has been developed to create a new version namely “Priority Based-Fair Queuing-Tolerated Delay” (PFQ-TD) to balance the data transmission between emergency and non-emergency cases where tolerated delay in emergency cases has been considered. PFQ-TD has succeeded in balancing fairly this issue and reducing the total average delay and jitter of emergency and non-emergency cases in all sensors and keep them within the acceptable allowable standards. PFQ-TD has improved the overall average delay and jitter in emergency and non-emergency cases among all sensors by 41% and 84% respectively in comparison to PFQ model