4,809 research outputs found
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Wireless Cellular Networks
When aiming for achieving high spectral efficiency in wireless cellular networks, cochannel interference (CCI) becomes the dominant performancelimiting factor. This article provides a survey of CCI mitigation techniques, where both active and passive approaches are discussed in the context of both open- and closed-loop designs.More explicitly, we considered both the family of flexible frequency-reuse (FFR)-aided and dynamic channel allocation (DCA)-aided interference avoidance techniques as well as smart antenna-aided interference mitigation techniques, which may be classified as active approach
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Autonomous Algorithms for Centralized and Distributed Interference Coordination: A Virtual Layer Based Approach
Interference mitigation techniques are essential for improving the
performance of interference limited wireless networks. In this paper, we
introduce novel interference mitigation schemes for wireless cellular networks
with space division multiple access (SDMA). The schemes are based on a virtual
layer that captures and simplifies the complicated interference situation in
the network and that is used for power control. We show how optimization in
this virtual layer generates gradually adapting power control settings that
lead to autonomous interference minimization. Thereby, the granularity of
control ranges from controlling frequency sub-band power via controlling the
power on a per-beam basis, to a granularity of only enforcing average power
constraints per beam. In conjunction with suitable short-term scheduling, our
algorithms gradually steer the network towards a higher utility. We use
extensive system-level simulations to compare three distributed algorithms and
evaluate their applicability for different user mobility assumptions. In
particular, it turns out that larger gains can be achieved by imposing average
power constraints and allowing opportunistic scheduling instantaneously, rather
than controlling the power in a strict way. Furthermore, we introduce a
centralized algorithm, which directly solves the underlying optimization and
shows fast convergence, as a performance benchmark for the distributed
solutions. Moreover, we investigate the deviation from global optimality by
comparing to a branch-and-bound-based solution.Comment: revised versio
Large-Scale MIMO versus Network MIMO for Multicell Interference Mitigation
This paper compares two important downlink multicell interference mitigation
techniques, namely, large-scale (LS) multiple-input multiple-output (MIMO) and
network MIMO. We consider a cooperative wireless cellular system operating in
time-division duplex (TDD) mode, wherein each cooperating cluster includes
base-stations (BSs), each equipped with multiple antennas and scheduling
single-antenna users. In an LS-MIMO system, each BS employs antennas not
only to serve its scheduled users, but also to null out interference caused to
the other users within the cooperating cluster using zero-forcing (ZF)
beamforming. In a network MIMO system, each BS is equipped with only
antennas, but interference cancellation is realized by data and channel state
information exchange over the backhaul links and joint downlink transmission
using ZF beamforming. Both systems are able to completely eliminate
intra-cluster interference and to provide the same number of spatial degrees of
freedom per user. Assuming the uplink-downlink channel reciprocity provided by
TDD, both systems are subject to identical channel acquisition overhead during
the uplink pilot transmission stage. Further, the available sum power at each
cluster is fixed and assumed to be equally distributed across the downlink
beams in both systems. Building upon the channel distribution functions and
using tools from stochastic ordering, this paper shows, however, that from a
performance point of view, users experience better quality of service, averaged
over small-scale fading, under an LS-MIMO system than a network MIMO system.
Numerical simulations for a multicell network reveal that this conclusion also
holds true with regularized ZF beamforming scheme. Hence, given the likely
lower cost of adding excess number of antennas at each BS, LS-MIMO could be the
preferred route toward interference mitigation in cellular networks.Comment: 13 pages, 7 figures; IEEE Journal of Selected Topics in Signal
Processing, Special Issue on Signal Processing for Large-Scale MIMO
Communication
- …