Fast Dual-Radio Cross-Layer Handoffs in Multi-Hop Infrastructure-mode 802.11 Wireless Networks for In-Vehicle Multimedia Infotainment

Minimizing handoff latency and achieving near-zero packet loss is critical for delivering multimedia infotainment applications to fast-moving vehicles that are likely to encounter frequent handoffs. In this paper, we propose a dual-radio cross-layer handoff scheme for infrastructure-mode 802.11 Wireless Networks that achieve this goal. We present performance results of an implementation of our algorithm in a Linux-based On-Board-Unit prototype.Comment: Presented (oral) at IEEE Advanced Networking and Telecommunications, 2008 (ANTS 2008) Conference (http://www.antsconference.org) held at Indian Institute of Technology, Mumbai. Awarded Best Paper (Honorable Mention

Mobility management in 5G heterogeneous networks

In recent years, mobile data traffic has increased exponentially as a result of widespread popularity and uptake of portable devices, such as smartphones, tablets and laptops. This growth has placed enormous stress on network service providers who are committed to offering the best quality of service to consumer groups. Consequently, telecommunication engineers are investigating innovative solutions to accommodate the additional load offered by growing numbers of mobile users. The fifth generation (5G) of wireless communication standard is expected to provide numerous innovative solutions to meet the growing demand of consumer groups. Accordingly the ultimate goal is to achieve several key technological milestones including up to 1000 times higher wireless area capacity and a significant cut in power consumption. Massive deployment of small cells is likely to be a key innovation in 5G, which enables frequent frequency reuse and higher data rates. Small cells, however, present a major challenge for nodes moving at vehicular speeds. This is because the smaller coverage areas of small cells result in frequent handover, which leads to lower throughput and longer delay. In this thesis, a new mobility management technique is introduced that reduces the number of handovers in a 5G heterogeneous network. This research also investigates techniques to accommodate low latency applications in nodes moving at vehicular speeds

Software-Driven and Virtualized Architectures for Scalable 5G Networks

In this dissertation, we argue that it is essential to rearchitect 4G cellular core networks–sitting between the Internet and the radio access network–to meet the scalability, performance, and flexibility requirements of 5G networks. Today, there is a growing consensus among operators and research community that software-defined networking (SDN), network function virtualization (NFV), and mobile edge computing (MEC) paradigms will be the key ingredients of the next-generation cellular networks. Motivated by these trends, we design and optimize three core network architectures, SoftMoW, SoftBox, and SkyCore, for different network scales, objectives, and conditions. SoftMoW provides global control over nationwide core networks with the ultimate goal of enabling new routing and mobility optimizations. SoftBox attempts to enhance policy enforcement in statewide core networks to enable low-latency, signaling-efficient, and customized services for mobile devices. Sky- Core is aimed at realizing a compact core network for citywide UAV-based radio networks that are going to serve first responders in the future. Network slicing techniques make it possible to deploy these solutions on the same infrastructure in parallel. To better support mobility and provide verifiable security, these architectures can use an addressing scheme that separates network locations and identities with self-certifying, flat and non-aggregatable address components. To benefit the proposed architectures, we designed a high-speed and memory-efficient router, called Caesar, for this type of addressing schemePHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146130/1/moradi_1.pd

Mobility and resource management for 5G heterogeneous networks

The conventional topology of current cellular networks is a star structure, where central control points usually serve as base stations (BSs). This provides the advantage of simplicity while still providing quality of service (QoS). For next-generation networks, however, this topology is disadvantageous and difficult to use due to the insufficient availability of network access. The hybrid topology radio network will thus naturally be the future mobile access network that can help to overcome current and future challenges efficiently. Therefore, relay technology can play an important role in a hybrid cellular network topology. Today, with the recent long-term evolution-advanced (LTE-A) standards, the 3rd Generation Partnership Project (3GPP) supports a single-hop relay technology in which the radio access link between the BS and users is relayed by only one relay station (RS). With the help of multi-hop relay, however, the radio link between the BS and users can be extended to more than two hops to improve the coverage and network capacity. Multiple hops to transmit data to and from the corresponding BS results in the reduction of path loss. However, using a multi-hop relay system requires more radio resources to transmit data through different hops. More interference is also created due to a greater number of simultaneous transmissions in the network. New mobility and resource management schemes are thus important for achieving a high QoS while increasing the whole network capacity. In the first part, the problem of relay selection and radio resource allocation is studied, and choosing how the bandwidth should be shared between direct, backhaul, and access links in multi-hop relay networks is discussed. In such a network, resource allocation plays a critical role because it manages channel access in both time and frequency domains and determines how resources are allocated for different links. The proposed solution includes a nonlinear programming technique and a heuristic method. First, the problem formulation of resource allocation and relay selection is presented to provide an integrated framework for multi-hop relay networks. Second, an analytical solution to the problem is presented using a nonlinear programming technique. Finally, an iterative two-stage algorithm is presented to address the joint resource allocation and relay selection problem in multi-hop relay networks Under backhaul and capacity limitation constraints. In particular, the first stage proposed a fast approximation analytical solution for a resource allocation algorithm that takes into account the trade-off between the optimality and the complexity of the multi-hop relay architecture; the second stage presented a heuristic relay selection strategy that considers the RS load and helps to keep the relay from being overloaded is proposed. In the second part, the mobility problem in downlink multi-hop relay networks is addressed. In addition to the resource allocation issue, the relay selection problem is studied from a network layer perspective. Therefore, this part includes the issue of radio path selection. As an alternative to the heuristic algorithm developed in the previous part, the presented work describes the development and evaluation of a relay-selection scheme based on a Markov decision process (MDP) that considers the RS load and the existing radio-link path to improve handoff performance. First, the problem formulation of resource allocation and relay selection is presented. Second, an MDP mathematical model is developed to solve the relay selection problem in a decentralized way and to make the selection process simple. This relay selection scheme has the objective of maintaining the throughput and ensuring seamless mobility and service continuity to all mobile terminals while reducing the handoff frequency and improving handoff performance. In the third part, the admission and power control problem of a general heterogeneous network (HetNet) consisting of several small cells (SCs) is solved. Compared to the first two parts of this work, the system is expanded from a multi-hop RS to a general SC context. This part therefore focuses only on the access link problem, assuming the capacity of the SC backhaul links are large enough not to be bottlenecks. This part mainly deals with the problem of how to maximize the number of admitted users in an overloaded system while minimizing the transmit power given a certain QoS level. First, the problem is formulated to address concerns about QoS requirements in a better way. Second, a Voronoi-based user association scheme for maximizing the number of admitted users in the system under QoS and capacity limitation constraints is proposed to find near-optimal solutions. Finally, a twostage algorithm is presented to address the joint admission and power control problem in a downlink heterogeneous SC network. In particular, the first stage proposes a dynamic call admission control policy that considers the SC load and call-level QoS while also helping to keep the system from being overloaded. The second stage presents an adaptive power allocation strategy that considers both user distribution and the density of SCs in HetNets. Finally, the proposed solutions are evaluated using extensive numerical simulations, and the numerical results are presented to provide a comparison with related works found in the literature

Solution analysis of universal wireless joint point technologies for heterogeneous tactical networks

The scope of this thesis is to analyze the feasibility of having different wireless mesh network architectures transfer data to a wired network via a joint (universal) access point (UAP). Additionally this thesis analyzes the feasibility of using similar joint (universal) access point technology to allow heterogeneous wireless mesh network devices in close proximally to the UAP transmit data to/from each other via the UAP. This research also includes evaluating COTS tools for possible implementation of a joint access point as well as seeking partnership with private industry to assist in research efforts and/or the development or joint (universal) access point solution(s). The thesis concludes with a recommendation on application of universal joint point technology, to include recommendations for implementation of such technology in the Tactical Network Topology (TNT) environment.http://archive.org/details/solutionnalysiso109452951Approved for public release; distribution is unlimited