MODIFIKASI KITOSAN MELALUI PROSES SWELLING DAN CROSSLINKING MENGGUNAKAN GLUTARALDEHIT SEBAGAI PENGADSORPSI LOGAM Cr (VI) PADA LIMBAH INDUSTRI BATIK MODIFICATION OF CHITOSAN BY SWELLING AND CROSSLINKING USING GLUTARALDEHYDE AS HEAVY METAL Cr (VI) ADSORBENT IN BATIK INDUSTRY WASTES

Study on chitosan modification by swelling and crosslinking and its application as a selective adsorbent for heavy metals Cr (VI) in batik industry wastes was done. Swelling is intended to improve chitosan porosity, whereas crosslinking is to increase the resistance of chitosan against acid. Natural samples are generally acidic, thus limiting chitosan application as an adsorbent. Modification of chitosan by combining swelling and crosslinking is expected to increase its adsorption capacity in binding heavy metal ions in water. At first, chitosan was dissolved in 1% acetic acid, and swelling process was then conducted by spraying into 5% NaOH solution to form chitosan beads. Next chitosan beads were crosslinked using Glutaraldehyde (Glut) with various concentrations of 8, 10, 20, and 25%. The modified chitosan was later contacted with Cr (VI) to test its adsorption capacity with variation of pH and contact time. Finally, application of modified chitosan was done in batik industry wastes containing Cr (IV). Based on the results, chitosan-Glu 25% (v/v) was the optimum concentration of crosslingker to adsorb Cr (VI) ions. Modified chitosan has a solubility resistance to acids, even though a strong acid. Modification of chitosan improved also its adsorption capacity to Cr (VI) from 74% (pure chitosan) to 89% with contact time 30 min. and pH 3. On the application to the batik wastes, the modified chitosan were able to adsorb Cr (IV) up to the level of 5 ppm. Thus, the modified chitosan has a potential to be applied as an adsorbent of Cr (VI) in batik industry wastes. Keywords: Chitosan, Swelling, Crosslinking, Glutaraldehyde (Glut

Sulfanilic acid-modified chitosan mini-spheres and their application for lysozyme purification from egg white

A cation exchange matrix with zwitterionic and multimodal properties was synthesized by a simple reaction sequence coupling sulfanilic acid to a chitosan based support. The novel chromatographic matrix was physico-chemically characterized by ss-NMR and ζ potential, and its chromatographic performance was evaluated for lysozyme purification from diluted egg white. The maximum adsorption capacity, calculated according to Langmuir adsorption isotherm, was 50.07 ± 1.47 mg g-1 while the dissociation constant was 0.074 ± 0.012 mg mL-1 . The process for lysozyme purification from egg white was optimized, with 81.9% yield and a purity degree of 86.5%, according to RP-HPLC analysis. This work shows novel possible applications of chitosan based materials. The simple synthesis reactions combined with the simple mode of use of the chitosan matrix represents a novel method to purify proteins from raw starting materials.Fil: Hirsch, Daniela Belén. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Baieli, María Fernanda. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Urtasun, Nicolás. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Lazaro Martinez, Juan Manuel. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Química y Físico-Química Biológicas ; ArgentinaFil: Glisoni, Romina Julieta. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Miranda, Maria Victoria. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Cascone, Osvaldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; ArgentinaFil: Wolman, Federico Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Houssay. Instituto de Nanobiotecnología. Universidad de Buenos Aires. Facultad de Farmacia y Bioquímica. Instituto de Nanobiotecnología; Argentin

Formulation and evaluation of floating mucoadhesive alginate beads for targetingHelicobacter pylori

Objectives: There are various obstacles in the eradication of Helicobacter.pylori (H. pylori) infections, including low antibiotic levels and poor accessibility of the drug at the site of the infection. This study describes the preparation and characterisation of novel floating-mucoadhesive alginate beads loaded with clarithromycin (CMN) for delivery to the gastric mucosa to improve the eradication of this micro-organism. Methods: Calcium alginate beads were prepared by ionotropic gelation. The formulation was modified through addition of oil and coating with chitosan in order to improve floating, mucoadhesion and modify drug release. Key findings: SEM confirmed the sphericity of the beads with X-ray microtomography (XμMT) showing the 3D structure of the beads with the layered internal structure of the bead and the even distribution of the drug within the bead. This formulation combined two gastro-retentive strategies and these formulations produced excellent in vitro floating, mucoadhesive and drug release characteristics. Enhanced stability of the beads in phosphate buffer raises a potential for the modified formulations to be targeted to regions of higher pH within the gastrointestinal tract with a higher pH. Drug release from these beads was sustained through an unstirred mucin layer simulating in vivo conditions under which the H. pylori resides in the gastric mucosa. Conclusions: This novel formulation will ensure retention for a longer period in the stomach than conventional formulations and control drug release, ensuring high local drug concentrations, leading to improved eradication of the bacteria

Development of Chitosan/Gelatin/Keratin Composite Containing Hydrocortisone Sodium Succinate as a Buccal Mucoadhesive Patch to Treat Desquamative Gingivitis

The aim of this research was to develop chitosan/gelatin/keratin composite containing hydrocortisone sodium succinate as a buccal mucoadhesive patch to treat desquamative gingivitis, which was fabricated through an environmental friendly process. Mucoadhesive films increase the advantage of higher efficiency and drug localization in the affected region. In this research, mucoadhesive films, for the release of hydrocortisone sodium succinate, were prepared using different ratios of chitosan, gelatin and keratin. In the first step, chitosan and gelatin proportions were optimized after evaluating the mechanical properties, swelling capacity, water uptake, stability, and biodegradation of the films. Then, keratin was added at different percentages to the optimum composite of chitosan and gelatin together with the drug. The results of surface pH showed that none of the samples were harmful to the buccal cavity. FTIR analysis confirmed the influence of keratin on the structure of the composite. The presence of a higher amount of keratin in the composite films resulted in high mechanical, mucoadhesive properties and stability, low water uptake and biodegradation in phosphate buffer saline (pH = 7.4) containing 104 U/ml lysozyme. The release profile of the films ascertained that keratin is a rate controller in the release of the hydrocortisone sodium succinate. Finally, chitosan/gelatin/keratin composite containing hydrocortisone sodium succinate can be employed in dental applications

Printed, Flexible Lactate Sensors: Design Considerations Before Performing On-Body Measurements.

This work reports the process of sensor development, optimization, and characterization before the transition to on-body measurements can be made. Sensors using lactate oxidase as a sensing mechanism and tetrathiafulvalene as a mediator were optimized for sporting applications. Optimized sensors show linear range up to 24 mM lactate and sensitivity of 4.8 μA/mM which normalizes to 68 μA*cm-2/mM when accounting for surface area of the sensor. The optimized sensors were characterized 3 different ways: using commercially available reference and counter electrodes, using printed reference and counter electrodes, and using a printed reference electrode with no counter electrode. Sensors intended for measuring sweat must be selective in the presence of sweat constituents. Thus, in addition to traditional characterization in pH 7.0 buffer, we characterized sensor performance in solutions intended to approximate sweat. Sensor performance in pH 7.0 buffer solution was not reflective of sensor performance in artificial sweat, indicating that further characterization is necessary between sensor measurement in pH 7.0 buffer and on-body measurements. Furthermore, we performed enzyme activity measurements and sensor measurements concurrently in five different salts individually, finding that while NH4Cl and MgCl2 do not affect enzyme activity or sensor performance in physiologically relevant ranges of salt concentration, NaCl concentration or KCl concentration decreases enzyme activity and sensor current. On the other hand, CaCl2 induced a nonlinear change in sensor performance and enzyme activity with increasing salt concentration

Immobilized photosensitizers for antimicrobial applications

Photodynamic antimicrobial chemotherapy (PACT) is a very promising alternative to conventional antibiotics for the efficient inactivation of pathogenic microorganisms; this is due to the fact that it is virtually impossible for resistant strains to develop due to the mode of action employed. PACT employs a photosensitizer, which preferentially associates with the microorganism, and is then activated with non-thermal visible light of appropriate wavelength(s) to generate high localized concentrations of reactive oxygen species (ROS), inactivating the microorganism. The concept of using photosensitizers immobilized on a surface for this purpose is intended to address a range of economic, ecological and public health issues. Photosensitising molecules that have been immobilized on solid support for PACT applications are described herein. Different supports have been analyzed as well as the target microorganism and the effectiveness of particular combinations of support and photosensitiser

Dyes adsorption from aqueous solutions by Chitosan

In this study the ability of chitosan to remove acid, basic, reactive and direct dyestuffs by adsorption was studied. The effect of several factors influencing dye adsorption such as dye concentration, grain size, pH and temperature were investigated. Desorption of dyes at different pH was also examined. It was shown that the adsorption capacities of chitosan were comparatively high for acid and direct dyes and that the adsorption was controlled by the acidity of the solution. The kinetics of adsorption were found to be of pseudo second order. Batch isotherm studies showed that adsorption of dyes from aqueous solution by chitosan was described by the Langmuir equation

Microwave-enhanced synthesis of biodegradable multifunctional chitosan hydrogels for wastewater treatment

Chitosan, a derivative of chitin, is a biodegradable polymer known of its favorable properties, applicable in medicine and industry. Commonly obtained chitosan hydrogels are of various swelling capacity, and may bind only anions losing their susceptibility to biodegradation. Hydrogels are mostly obtained using toxic crosslinkers, which pollute environment due to waste generation during their synthesis. In the present article a novel, waste-free method for obtaining chitosan hydrogels under microwave irradiation, is described. Their chemical and morphological structure, swelling properties, sorption capability of a model dye and cadmium ions are described, and kinetic studies, were carried out. Biodegradability of the obtained hydrogels was investigated with the Sturm Test method. As a result, multifunctional chitosan hydrogels with both negative and positive surface charges and increased ability of anions and cations binding, were obtained. Materials were fully biodegradable, capable to absorb high amounts of water, as well as to remove various water contaminants.Web of Science111081980

Multifunctional nanocarriers for lung drug delivery

Nanocarriers have been increasingly proposed for lung drug delivery applications. The strategy of combining the intrinsic and more general advantages of the nanostructures with specificities that improve the therapeutic outcomes of particular clinical situations is frequent. These include the surface engineering of the carriers by means of altering the material structure (i.e., chemical modifications), the addition of specific ligands so that predefined targets are reached, or even the tuning of the carrier properties to respond to specific stimuli. The devised strategies are mainly directed at three distinct areas of lung drug delivery, encompassing the delivery of proteins and protein-based materials, either for local or systemic application, the delivery of antibiotics, and the delivery of anticancer drugs-the latter two comprising local delivery approaches. This review addresses the applications of nanocarriers aimed at lung drug delivery of active biological and pharmaceutical ingredients, focusing with particular interest on nanocarriers that exhibit multifunctional properties. A final section addresses the expectations regarding the future use of nanocarriers in the area.UID/Multi/04326/2019; PD/BD/137064/2018info:eu-repo/semantics/publishedVersio