1,053 research outputs found
Recommended from our members
Survey of switching techniques in high-speed networks and their performance
One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (Asynchronous Transfer Mode). ATM can be characterized by very high speed transmission links and simple, hard wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks.A number of designs has been proposed for implementing ATM switches. While many differences exist among the proposals, the vast majority of them is based on self-routing multi-stage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routing capability and suitability for VLSI implementation.Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques has also been proposed to improve the performance of blocking and nonblocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues
On-board B-ISDN fast packet switching architectures. Phase 2: Development. Proof-of-concept architecture definition report
For the next-generation packet switched communications satellite system with onboard processing and spot-beam operation, a reliable onboard fast packet switch is essential to route packets from different uplink beams to different downlink beams. The rapid emergence of point-to-point services such as video distribution, and the large demand for video conference, distributed data processing, and network management makes the multicast function essential to a fast packet switch (FPS). The satellite's inherent broadcast features gives the satellite network an advantage over the terrestrial network in providing multicast services. This report evaluates alternate multicast FPS architectures for onboard baseband switching applications and selects a candidate for subsequent breadboard development. Architecture evaluation and selection will be based on the study performed in phase 1, 'Onboard B-ISDN Fast Packet Switching Architectures', and other switch architectures which have become commercially available as large scale integration (LSI) devices
Product-form solutions for integrated services packet networks and cloud computing systems
We iteratively derive the product-form solutions of stationary distributions
of priority multiclass queueing networks with multi-sever stations. The
networks are Markovian with exponential interarrival and service time
distributions. These solutions can be used to conduct performance analysis or
as comparison criteria for approximation and simulation studies of large scale
networks with multi-processor shared-memory switches and cloud computing
systems with parallel-server stations. Numerical comparisons with existing
Brownian approximating model are provided to indicate the effectiveness of our
algorithm.Comment: 26 pages, 3 figures, short conference version is reported at MICAI
  200
Information Switching Processor (ISP) contention analysis and control
Future satellite communications, as a viable means of communications and an alternative to terrestrial networks, demand flexibility and low end-user cost. On-board switching/processing satellites potentially provide these features, allowing flexible interconnection among multiple spot beams, direct to the user communications services using very small aperture terminals (VSAT's), independent uplink and downlink access/transmission system designs optimized to user's traffic requirements, efficient TDM downlink transmission, and better link performance. A flexible switching system on the satellite in conjunction with low-cost user terminals will likely benefit future satellite network users
Recommended from our members
An Overview of the Isochronets Architecture for High Speed Networks
This paper overviews a novel switching architecture for high-speed networks: Isochronets. Isochronets time-divide network bandwidth among routing trees. Traffic moves down a routing tree to the root during its time band. Network functions such as routing and flow control are entirely governed by band timers and require no processing of frame headers bits. Frame motions need not be delayed for switch processing, allowing Isochronets to scale over a large spectrum of transmission speeds and support all-optical implementations. The network functions as a media-access layer that can support multiple framing protocols simultaneously, handled by higher layers at the periphery. Internetworking is reduced to a simple media-layer bridging. Isochronets provide flexible quality of service control and multicasting through allocation of bands to routing trees. They can be tuned to span a spectrum of performance behaviors outperforming both circuit or packet switching
Recommended from our members
Survey of unified approaches to integrated-service networks
The increasing demand for communication services, coupled with recent technological advances in communication media and switching techniques, has resulted in a proliferation of new and expanded services. Currently, networks are needed which can transmit voice, data, and video services in an application-independent fashion. Unified approaches employ a single switching technique across the entire network bandwidth, thus, allowing services to be switched in an application-independent manner. This paper presents a taxonomy of integrated-service networks including a look at N-ISDN, while focusing on unified approaches to integrated-service networks.The two most promising unified approaches are burst and fast packet switching. Burst switching is a circuit switching-based approach which allocates channel bandwidth to a connection only during the transmission of "bursts" of information. Fast packet switching is a packet switching-based approach which can be characterized by very high transmission rates on network links and simple, hardwired protocols which match the rapid channel speed of the network. Both approaches are being proposed as possible implementations for integrated-service networks. We survey these two approaches, and also examine the key performance issues found in fast packet switching. We then present the results of a simulation study of a fast packet switching network
Deadline-ordered parallel iterative matching with QoS guarantee.
by Lui Hung Ngai.Thesis (M.Phil.)--Chinese University of Hong Kong, 2000.Includes bibliographical references (leaves 56-[59]).Abstracts in English and Chinese.Chapter 1 --- Introduction ---  p.1Chapter 1.1 --- Thesis Overview ---  p.3Chapter 2 --- Background & Related work ---  p.4Chapter 2.1 --- Scheduling problem in ATM switch ---  p.4Chapter 2.2 --- Traffic Scheduling in output-buffered switch ---  p.5Chapter 2.3 --- Traffic Scheduling in Input buffered Switch ---  p.16Chapter 3 --- Deadline-ordered Parallel Iterative Matching (DLPIM) ---  p.22Chapter 3.1 --- Introduction ---  p.22Chapter 3.2 --- Switch model ---  p.23Chapter 3.3 --- Deadline-ordered Parallel Iterative Matching (DLPIM) ---  p.24Chapter 3.3.1 --- Motivation ---  p.24Chapter 3.3.2 --- Algorithm ---  p.26Chapter 3.3.3 --- An example of DLPIM ---  p.28Chapter 3.4 --- Simulation ---  p.30Chapter 4 --- DLPIM with static scheduling algorithm ---  p.41Chapter 4.1 --- Introduction ---  p.41Chapter 4.2 --- Static scheduling algorithm ---  p.42Chapter 4.3 --- DLPIM with static scheduling algorithm ---  p.48Chapter 4.4 --- An example of DLPIM with static scheduling algorithm ---  p.50Chapter 5 --- Conclusion ---  p.54Bibliography ---  p.5
Applications of satellite technology to broadband ISDN networks
Two satellite architectures for delivering broadband integrated services digital network (B-ISDN) service are evaluated. The first is assumed integral to an existing terrestrial network, and provides complementary services such as interconnects to remote nodes as well as high-rate multicast and broadcast service. The interconnects are at a 155 Mbs rate and are shown as being met with a nonregenerative multibeam satellite having 10-1.5 degree spots. The second satellite architecture focuses on providing private B-ISDN networks as well as acting as a gateway to the public network. This is conceived as being provided by a regenerative multibeam satellite with on-board ATM (asynchronous transfer mode) processing payload. With up to 800 Mbs offered, higher satellite EIRP is required. This is accomplished with 12-0.4 degree hopping beams, covering a total of 110 dwell positions. It is estimated the space segment capital cost for architecture one would be about 250M. The net user cost is given for a variety of scenarios, but the cost for 155 Mbs services is shown to be about $15-22/minute for 25 percent system utilization
Multiclass scheduling algorithms for the DAVID metro network
Abstract—The data and voice integration over dense wavelength-division-multiplexing (DAVID) project proposes a metro network architecture based on several wavelength-division-multiplexing (WDM) rings interconnected via a bufferless optical switch called Hub. The Hub provides a programmable interconnection among rings on the basis of the outcome of a scheduling algorithm. Nodes connected to rings groom traffic from Internet protocol routers and Ethernet switches and share ring resources. In this paper, we address the problem of designing efficient centralized scheduling algorithms for supporting multiclass traffic services in the DAVID metro network. Two traffic classes are considered: a best-effort class, and a high-priority class with bandwidth guarantees. We define the multiclass scheduling problem at the Hub considering two different node architectures: a simpler one that relies on a complete separation between transmission and reception resources (i.e., WDM channels) and a more complex one in which nodes fully share transmission and reception channels using an erasure stage to drop received packets, thereby allowing wavelength reuse. We propose both optimum and heuristic solutions, and evaluate their performance by simulation, showing that heuristic solutions exhibit a behavior very close to the optimum solution. Index Terms—Data and voice integration over dense wavelength-division multiplexing (DAVID), metropolitan area network, multiclass scheduling, optical ring, wavelength-division multiplexing (WDM). I
- …
