WIMAX INNER RECEIVER DESIGN

"Igniting broadband wireless access". That is the vision for WiMAX, which is defined in the 802.16 standards to cover the frequency bands within the 2 to 66 GHz region. It promises an OFDM air interface with data rates comparable to wireline services (cable and xDSL). Coupled with QoS provisioning and support for NLOS propagation, WiMAX offers the platform for real time multimedia communications in addition to being able to replace the existing legacy PSTN. WiMAX also becomes the perfect launch pad for service providers to roll out triple play. The standard based products and availability of internet to anyone, anywhere and anytime will almost guarantee the widespread adoption ofWiMAX everywhere. This FYP attempts to simulate the working mechanism of a WiMAX receiver, with focus on synchronization (inner receiver), via simulation in Simulink. The undertaking will involve the baseband physical radio link. The proposed method of synchronization is a novel hybrid of a modified version of the Schmidl and Cox technique and the double sliding window packet detection. The inner receiver deals with synchronization issues such as FFT timing offset and carrier frequency offset. Offsets and impairments are deliberately introduced into the system to ensure that the receiver is totally blind and to fully test the proposed algorithm. Results indicate that the proposed method can harness the best features of both worlds. Frame timing synchronization is achieved accurately without uncertainties of detecting a plateau. On the other hand, frequency offsets are dealt with efficiently using the tried and tested Schmidl and Cox technique. All in all, the proposed synchronization scheme is very well suited for WiMAX systems. The proposed method can achieve rapid synchronization with low overhead

Detection of OFDM Signals Using Pilot Tones and Applications to Spectrum Sensing for Cognitive Radio Systems

Nowadays there are an increasing number of wireless devices which support wireless networking and the need for higher data rate communication is increasing rabidly. As more and more systems go wireless, approaching technologies will face spectral crowding and existence of wireless devices will be an important issue. Because of the limited bandwidth availability, accepting the request for higher capacity and data rates is a challenging task, demanding advanced technologies that can offers new methods of using the available radio spectrum. Cognitive radio introduces a key solution to the spectral increasing issue by presenting the opportunistic usage of spectrum that is not heavily occupied by licensed users. It is a latest idea in wireless communications systems which objective to have more adaptive and aware communication devices which can make better use of available natural resources. Cognitive radio appears to be an attractive solution to the spectral congestion problem by introducing the notion of opportunistic spectrum use. Cognitive radios can operate as a secondary systems on top of existence system which are called primary (or licensed) systems. In this case, secondary (cognitive) users need to detect the unused spectrum in order to be able to access it. Because of its many advantages, orthogonal frequency division multiplexing (OFDM) has been successfully used in numerous wireless standards and technologies. It\u27s shown that OFDM will play an important role in realizing the cognitive radio concept as well by providing a proven, scalable, and adaptive technology for air interface. Researches show that OFDM technique is considered as a candidate for cognitive radio systems. The objective of this dissertation is to explore detecting of OFDM modulated signals using pilot tones information. Specifically we applying Time-Domain Symbol Cross-Correlation (TDSC) method in the confect of actual 4G wireless standards such as WIMAX and LTE. This detection is only based upon the knowledge of pilot structures without knowledge of received signal so that, it can be performed on every portion of the received signal. The approach induces Cross-Correlation between pilots subcarriers and exploits the deterministic and periodic characteristics of pilot mapping in the time frequency domain

A Novel QAM Technique for High Order QAM Signaling

The paper proposes a novel spread quadrature amplitude modulation (S-QAM) technique with high SNR improvement for high-order QAM channels. Simulated and experimental bit error rate (BER) performance analyses of the proposed technique in blind and non-blind equalizers are obtained by using single carrier (SC) WiMAX (IEEE 802.16-2004) radio. Instead of using any one particular type of channel profile, this study concentrates on true frequency selective Rayleigh fading channels in the real-time WiMAX radio environment around 3.5 GHz. The Constant Modulus Algorithm (CMA) blind equalizer has been compared with the popular non-blind equalizers, Recursive Least Squares (RLS) and Least Mean Squares (LMS) algorithm, as benchmarks. It has been proven in experimental and simulated channels that CMA blind equalizer, using the proposed technique, can be considered as a low complexity, spectrum efficient and high performance time domain equalizations to be embedded in a transceiver for the next generation communications. Furthermore the proposed technique has also reduced approximately till 5 dB and 7.5 dB performance differences between non-blind and blind equalizers for 16-QAM and 64-QAM, respectively. The simulation results have demonstrated that the simulated and experimental studies of the proposed technique are compatible with each other and extremely satisfying

Efficient space-frequency block coded pilot-aided channel estimation method for multiple-input-multiple-output orthogonal frequency division multiplexing systems over mobile frequency-selective fading channels

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.An iterative pilot-aided channel estimation technique for space-frequency block coded (SFBC) multiple-input multiple-output orthogonal frequency division multiplexing systems is proposed. Traditionally, when channel estimation techniques are utilised, the SFBC information signals are decoded one block at a time. In the proposed algorithm, multiple blocks of SFBC information signals are decoded simultaneously. The proposed channel estimation method can thus significantly reduce the amount of time required to decode information signals compared to similar channel estimation methods proposed in the literature. The proposed method is based on the maximum likelihood approach that offers linearity and simplicity of implementation. An expression for the pairwise error probability (PEP) is derived based on the estimated channel. The derived PEP is then used to determine the optimal power allocation for the pilot sequence. The performance of the proposed algorithm is demonstrated in high frequency selective channels, for different number of pilot symbols, using different modulation schemes. The algorithm is also tested under different levels of Doppler shift and for different number of transmit and receive antennas. The results show that the proposed scheme minimises the error margin between slow and high speed receivers compared to similar channel estimation methods in the literature.Peer reviewe

WIMAX TESTBED

WiMAX, the Worldwide Interoperability for Microwave Access, is a telecommunications technology aimed at providing wireless data over long distances in a variety of ways, from point-to-point links to full mobile cellular type access. It is based on the IEEE 802.16 standard, which is also called Wire IessMAN. The name WiMAX was created by the WiMAX Forum, which was formed in June 2001 to promote conformance and interoperability of the standard. The forum describes WiMAX as a standards-based technology enabling the delivery of last mile wireless broadband access as an alternative to cable and DSL. This Final Year Project attempts to simulate via Simulink, the working mechanism of a WiMAX testbed that includes a transmitter, channel and receiver. This undertaking will involve the baseband physical radio link. Rayleigh channel model together with frequency and timing offsets are introduced to the system and a blind receiver will attempt to correct these offsets and provide channel equalization. The testbed will use the Double Sliding Window for timing offset synchronization and the Schmid! & Cox algorithm for Fractional Frequency Offset estimation. The Integer Frequency Offset synchronization is achieved via correlation of the incoming preamble with its local copy whereas Residual Carrier Fr~quency Offset is estimated using the L th extension method. A linear Channel Estimator is added and combined with all the other blocks to form the testbed. From the results, this testbed matches the standard requirements for the BER when SNR is 18dB or higher. At these SNRs, the receiver side of the testbed is successful in performing the required synchronization and obtaining the same data sent. Sending data with SNR lower than 18dB compromises its performance as the channel equalizer is non-linear. This project also takes the first few steps of hardware implementation by using Real Time Workshop to convert the Simulink model into C codes which run outside MATLAB. In addition, the Double Sliding Window and Schmid! & Cox blocks are converted to Xilinx blocks and proven to be working like their Simulink counterparts

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Frequency Synchronization in Frequency Domain OFDM-IM based WLAN Systems

The next-generation of wireless local area network systems are being conceptualized with new applications, smart devices and use cases which mandate unprecedented levels of high data rates, spectral efficiency, reliability, low latency and high energy efficiency. The index modulated orthogonal frequency division multiplexing (OFDM-IM) stands out as the most endearing candidate for physical layer modulation technique which provides a smooth transit to green communications. However, OFDM-IM being a multicarrier technique similar to classical OFDM is also very sensitive to frequency synchronization errors and needs to be addressed on priority. In this article, a novel algorithm is proposed which estimates and corrects the carrier frequency offset at the receiver and the algorithm\u27s performance is compared with two frequency domain variants of OFDM-IM and the classical OFDM under the same channel conditions and the simulation results show that our algorithm is not only capable of meeting the standard requirement of +/-20ppm but can handle higher offsets till +/-30ppm