Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

05141 Abstracts Collection -- Power-aware Computing Systems

From 03.04.05 to 08.04.05, the Dagstuhl Seminar 05141 ``Power-aware Computing Systems\u27\u27 was held in the International Conference and Research Center (IBFI), Schloss Dagstuhl. During the seminar, several participants presented their current research, and ongoing work and discussed open problems. Abstracts of the presentations given during the seminar as well as abstracts of seminar results and ideas are collected in this paper. The first section describes the seminar topics and goals. Links to extended abstracts or full papers are provided, if available

Vector processing-aware advanced clock-gating techniques for low-power fused multiply-add

The need for power efficiency is driving a rethink of design decisions in processor architectures. While vector processors succeeded in the high-performance market in the past, they need a retailoring for the mobile market that they are entering now. Floating-point (FP) fused multiply-add (FMA), being a functional unit with high power consumption, deserves special attention. Although clock gating is a well-known method to reduce switching power in synchronous designs, there are unexplored opportunities for its application to vector processors, especially when considering active operating mode. In this research, we comprehensively identify, propose, and evaluate the most suitable clock-gating techniques for vector FMA units (VFUs). These techniques ensure power savings without jeopardizing the timing. We evaluate the proposed techniques using both synthetic and “real-world” application-based benchmarking. Using vector masking and vector multilane-aware clock gating, we report power reductions of up to 52%, assuming active VFU operating at the peak performance. Among other findings, we observe that vector instruction-based clock-gating techniques achieve power savings for all vector FP instructions. Finally, when evaluating all techniques together, using “real-world” benchmarking, the power reductions are up to 80%. Additionally, in accordance with processor design trends, we perform this research in a fully parameterizable and automated fashion.The research leading to these results has received funding from the RoMoL ERC Advanced Grant GA 321253 and is supported in part by the European Union (FEDER funds) under contract TTIN2015-65316-P. The work of I. Ratkovic was supported by a FPU research grant from the Spanish MECD.Peer ReviewedPostprint (author's final draft

Energy-efficient hardware design based on high-level synthesis

This dissertation describes research activities broadly concerning the area of High-level synthesis (HLS), but more specifically, regarding the HLS-based design of energy-efficient hardware (HW) accelerators. HW accelerators, mostly implemented on FPGAs, are integral to the heterogeneous architectures employed in modern high performance computing (HPC) systems due to their ability to speed up the execution while dramatically reducing the energy consumption of computationally challenging portions of complex applications. Hence, the first activity was regarding an HLS-based approach to directly execute an OpenCL code on an FPGA instead of its traditional GPU-based counterpart. Modern FPGAs offer considerable computational capabilities while consuming significantly smaller power as compared to high-end GPUs. Several different implementations of the K-Nearest Neighbor algorithm were considered on both FPGA- and GPU-based platforms and their performance was compared. FPGAs were generally more energy-efficient than the GPUs in all the test cases. Eventually, we were also able to get a faster (in terms of execution time) FPGA implementation by using an FPGA-specific OpenCL coding style and utilizing suitable HLS directives. The second activity was targeted towards the development of a methodology complementing HLS to automatically derive power optimization directives (also known as "power intent") from a system-level design description and use it to drive the design steps after HLS, by producing a directive file written using the common power format (CPF) to achieve power shut-off (PSO) in case of an ASIC design. The proposed LP-HLS methodology reduces the design effort by enabling designers to infer low power information from the system-level description of a design rather than at the RTL. This methodology required a SystemC description of a generic power management module to describe the design context of a HW module also modeled in SystemC, along with the development of a tool to automatically produce the CPF file to accomplish PSO. Several test cases were considered to validate the proposed methodology and the results demonstrated its ability to correctly extract the low power information and apply it to achieve power optimization in the backend flow

An Energy and Performance Exploration of Network-on-Chip Architectures

In this paper, we explore the designs of a circuit-switched router, a wormhole router, a quality-of-service (QoS) supporting virtual channel router and a speculative virtual channel router and accurately evaluate the energy-performance tradeoffs they offer. Power results from the designs placed and routed in a 90-nm CMOS process show that all the architectures dissipate significant idle state power. The additional energy required to route a packet through the router is then shown to be dominated by the data path. This leads to the key result that, if this trend continues, the use of more elaborate control can be justified and will not be immediately limited by the energy budget. A performance analysis also shows that dynamic resource allocation leads to the lowest network latencies, while static allocation may be used to meet QoS goals. Combining the power and performance figures then allows an energy-latency product to be calculated to judge the efficiency of each of the networks. The speculative virtual channel router was shown to have a very similar efficiency to the wormhole router, while providing a better performance, supporting its use for general purpose designs. Finally, area metrics are also presented to allow a comparison of implementation costs

A fuzzy logic based dynamic reconfiguration scheme for optimal energy and throughput in symmetric chip multiprocessors

Embedded systems architectures have traditionally often been investigated and designed in order to achieve a greater throughput combined with minimum energy consumption. With the advent of reconfigurable architectures it is now possible to support algorithms to find optimal solutions for an improved energy and throughput balance. As a result of ongoing research several online and offline techniques and algorithm have been proposed for hardware adaptation. This paper presents a novel coarse-grained reconfigurable symmetric chip multiprocessor (SCMP) architecture managed by a fuzzy logic engine that balances performance and energy consumption. The architecture incorporates reconfigurable level 1 (L1) caches, power gated cores and adaptive on-chip network routers to allow minimizing leakage energy effects for inactive components. A coarse grained architecture was selected as to be a focus for this study as it typically allows for fast reconfiguration as compared to the fine-grained architectures, thus making it more feasible to be used for runtime adaption schemes. The presented architecture is analyzed using a set of OpenMP based parallel benchmarks and the results show significant improvements in performance while maintaining minimum energy consumption

Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

A study on coarse-grained placement and routing for low-power FPGA architecture

制度:新 ; 報告番号:甲3603号 ; 学位の種類:博士(工学) ; 授与年月日:2012/3/15 ; 早大学位記番号:新595

Ultra-Low Leakage, Energy-Efficient Digital Integrated Circuit and System Design

The advances of the complementary metal-oxide-semiconductor (CMOS) technology manufacturing and design over the years have enabled a diverse range of applications across the power consumption, performance, and area (PPA) spectra. Many of the recent and prospective applications rely on the availability of energy-autonomous, miniaturized systems, i.e., ultra-low power (ULP) VLSI systems, which are generally characterized by extreme resource limitations. Some examples of applications are wireless sensing platforms, body-area sensor networks (BASN), biomedical and implantable devices, wearables, hearables, and monitors. Within the context of such applications, the key requirements are long lifetime and miniaturized size (sub-/millimeter-scale). In order to enable both requirements, energy-efficiency is the key metric. It allows for extended battery lifetime and operation with the energy that can be harvested from the environment, and it limits the size (volume) of the energy sources utilized to power these systems. Ultra-low voltage (ULV) operation is a key technique in which the VDD of circuits is reduced from nominal to near or below the threshold voltage of the transistor. It is a powerful knob that has been largely exploited by designers in order to achieve ultra-low power consumption and high energy-efficiency in CMOS. Existing ULP VLSI systems typically operate at a lower supply voltage thereby reducing their energy consumption by one to two orders of magnitude in order to enable the aforementioned applications. While supply voltage scaling is a promising measure for achieving low power and reducing energy consumption, it brings up several challenges. One critical issue is the leakage energy dissipated by the devices, which is magnified in portion to the total energy consumption at ULV. The reason is that, as VDD scales from nominal to near-threshold and sub-threshold, transistors become increasingly slower and they accumulate more leakage (i.e., static) power over longer cycle times. This energy waste accounts for a significant portion of the system's total energy consumption, offsets the gains provided by voltage scaling, defines the minimum energy per operation, and poses a practical limit for the system's energy-efficiency. This thesis presents selected research works on ultra-low leakage, energy-efficient digital integrated circuit design. More specifically, it describes novel and key techniques for minimizing the energy waste of idle/underutilized and always-on hardware. The main goal of such techniques is to push the envelope of energy-efficiency in energy-autonomous, miniaturized VLSI systems. Such techniques are applied to key building blocks of emerging mobile and embedded computing devices resulting in state-of-the-art energy-efficiencies