159 research outputs found

    How to Choose the Relevant MAC Protocol for Wireless Smart Parking Urban Networks?

    Get PDF
    Parking sensor network is rapidly deploying around the world and is regarded as one of the first implemented urban services in smart cities. To provide the best network performance, the MAC protocol shall be adaptive enough in order to satisfy the traffic intensity and variation of parking sensors. In this paper, we study the heavy-tailed parking and vacant time models from SmartSantander, and then we apply the traffic model in the simulation with four different kinds of MAC protocols, that is, contention-based, schedule-based and two hybrid versions of them. The result shows that the packet interarrival time is no longer heavy-tailed while collecting a group of parking sensors, and then choosing an appropriate MAC protocol highly depends on the network configuration. Also, the information delay is bounded by traffic and MAC parameters which are important criteria while the timely message is required.Comment: The 11th ACM International Symposium on Performance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks (2014

    Performance Comparison of Contention- and Schedule-based MAC Protocols in Urban Parking Sensor Networks

    Get PDF
    Network traffic model is a critical problem for urban applications, mainly because of its diversity and node density. As wireless sensor network is highly concerned with the development of smart cities, careful consideration to traffic model helps choose appropriate protocols and adapt network parameters to reach best performances on energy-latency tradeoffs. In this paper, we compare the performance of two off-the-shelf medium access control protocols on two different kinds of traffic models, and then evaluate their application-end information delay and energy consumption while varying traffic parameters and network density. From the simulation results, we highlight some limits induced by network density and occurrence frequency of event-driven applications. When it comes to realtime urban services, a protocol selection shall be taken into account - even dynamically - with a special attention to energy-delay tradeoff. To this end, we provide several insights on parking sensor networks.Comment: ACM International Workshop on Wireless and Mobile Technologies for Smart Cities (WiMobCity) (2014

    Ambient Data Collection with Wireless Sensor Networks

    Get PDF
    One of the most important applications for wireless sensor networks (WSNs) is Data Collection, where sensing data arecollected at sensor nodes and forwarded to a central base station for further processing. Since using battery powers and wirelesscommunications, sensor nodes can be very small and easily attached at specified locations without disturbing surroundingenvironments. This makes WSN a competitive approach for data collection comparing with its wired counterpart. In this paper,we review recent advances in this research area. We first highlight the special features of data collection WSNs, by comparingwith wired data collection network and other WSN applications. With these features in mind, we then discuss issues and priorsolutions on the data gathering protocol design. Our discussion also covers different approaches for message dissemination, whichis a critical component for network control and management and greatly affects the overall performance of a data collectionWSNsystem

    Collision Free Communication for Energy Saving in Wireless Sensor Networks

    Get PDF
    International audienceA Wireless Sensor Network (WSN) distinguishes from other wireless or wired networks through its capability of interaction with the environment. Such networks have been proposed for various applications including search and rescue, disaster relief, smart environments, and localization systems. These applications require a large amount of battery-powered wireless sensors, and are generally designed for long-term deployments with no human intervention. Consequently, energy efficiency is one of the main design objectives for these sensor networks

    Is There Light at the Ends of the Tunnel? Wireless Sensor Networks for Adaptive Lighting in Road Tunnels

    Get PDF
    Existing deployments of wireless sensor networks (WSNs) are often conceived as stand-alone monitoring tools. In this paper, we report instead on a deployment where the WSN is a key component of a closed-loop control system for adaptive lighting in operational road tunnels. WSN nodes along the tunnel walls report light readings to a control station, which closes the loop by setting the intensity of lamps to match a legislated curve. The ability to match dynamically the lighting levels to the actual environmental conditions improves the tunnel safety and reduces its power consumption. The use of WSNs in a closed-loop system, combined with the real-world, harsh setting of operational road tunnels, induces tighter requirements on the quality and timeliness of sensed data, as well as on the reliability and lifetime of the network. In this work, we test to what extent mainstream WSN technology meets these challenges, using a dedicated design that however relies on wellestablished techniques. The paper describes the hw/sw architecture we devised by focusing on the WSN component, and analyzes its performance through experiments in a real, operational tunnel

    A proposed energy efficient medium access control protocol for wireless sensor networks

    Get PDF
    Wireless Sensor Network (WSN) nodes are broadly used in various sectors nowadays. WSN nodes experience a lot of problems that impact on battery life for sensor node such as, overhearing, collision, hidden node, idle listening, schedule drifts, and high latency. Moreover, WSN nodes are strongly dependent on its limited battery power, and replenishing it again is difficult as nodes are organized in an ad-hoc manner. Energy consumption is the most vital factor to determine the life of a sensor network because sensor nodes are driven by low battery resources. An approach to conserve energy in WSN nodes is to carefully design its Medium Access Control (MAC) protocol. Several previous work has been carried out to mitigate many problems that impact on battery life for sensor node such as overhearing, collision, and hidden node. This dissertation attempts to design, a hybrid Energy-Efficient MAC (EEMAC) protocol to address the energy issues that are related to WSN nodes. This protocol aims to reduce idle listening times as well as lowering the latency time thus reducing the energy consumption. The proposed protocol has been developed and analysed using the ns-2 simulator. A mathematical model was used to verify and prove the efficiency of the proposed protocol. We have compared our proposed EE-MAC protocol with the existing contention-based IEEE 802.11 PSM protocol. The simulation results illustrate EE-MAC has achieved better energy conservation than the IEEE 802.11 PSM protocol

    A Survey on Energy-Efficient Strategies in Static Wireless Sensor Networks

    Get PDF
    A comprehensive analysis on the energy-efficient strategy in static Wireless Sensor Networks (WSNs) that are not equipped with any energy harvesting modules is conducted in this article. First, a novel generic mathematical definition of Energy Efficiency (EE) is proposed, which takes the acquisition rate of valid data, the total energy consumption, and the network lifetime of WSNs into consideration simultaneously. To the best of our knowledge, this is the first time that the EE of WSNs is mathematically defined. The energy consumption characteristics of each individual sensor node and the whole network are expounded at length. Accordingly, the concepts concerning EE, namely the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective, are proposed. Subsequently, the relevant energy-efficient strategies proposed from 2002 to 2019 are tracked and reviewed. Specifically, they respectively are classified into five categories: the Energy-Efficient Media Access Control protocol, the Mobile Node Assistance Scheme, the Energy-Efficient Clustering Scheme, the Energy-Efficient Routing Scheme, and the Compressive Sensing--based Scheme. A detailed elaboration on both of the basic principle and the evolution of them is made. Finally, further analysis on the categories is made and the related conclusion is drawn. To be specific, the interdependence among them, the relationships between each of them, and the Energy-Efficient Means, the Energy-Efficient Tier, and the Energy-Efficient Perspective are analyzed in detail. In addition, the specific applicable scenarios for each of them and the relevant statistical analysis are detailed. The proportion and the number of citations for each category are illustrated by the statistical chart. In addition, the existing opportunities and challenges facing WSNs in the context of the new computing paradigm and the feasible direction concerning EE in the future are pointed out

    W-MAC: A Workload-Aware MAC Protocol for Heterogeneous Convergecast in Wireless Sensor Networks

    Get PDF
    The power consumption and latency of existing MAC protocols for wireless sensor networks (WSNs) are high in heterogeneous convergecast, where each sensor node generates different amounts of data in one convergecast operation. To solve this problem, we present W-MAC, a workload-aware MAC protocol for heterogeneous convergecast in WSNs. A subtree-based iterative cascading scheduling mechanism and a workload-aware time slice allocation mechanism are proposed to minimize the power consumption of nodes, while offering a low data latency. In addition, an efficient schedule adjustment mechanism is provided for adapting to data traffic variation and network topology change. Analytical and simulation results show that the proposed protocol provides a significant energy saving and latency reduction in heterogeneous convergecast, and can effectively support data aggregation to further improve the performance
    • …
    corecore