1,621 research outputs found
Two-tier channel estimation aided near-capacity MIMO transceivers relying on norm-based joint transmit and receive antenna selection
We propose a norm-based joint transmit and receive antenna selection (NBJTRAS) aided near-capacity multiple-input multiple-output (MIMO) system relying on the assistance of a novel two-tier channel estimation scheme. Specifically, a rough estimate of the full MIMO channel is first generated using a low-complexity, low-training-overhead minimum mean square error based channel estimator, which relies on reusing a modest number of radio frequency (RF) chains. NBJTRAS is then carried out based on this initial full MIMO channel estimate. The NBJTRAS aided MIMO system is capable of significantly outperforming conventional MIMO systems equipped with the same modest number of RF chains, while dispensing with the idealised simplifying assumption of having perfectly known channel state information (CSI). Moreover, the initial subset channel estimate associated with the selected subset MIMO channel matrix is then used for activating a powerful semi-blind joint channel estimation and turbo detector-decoder, in which the channel estimate is refined by a novel block-of-bits selection based soft-decision aided channel estimator (BBSB-SDACE) embedded in the iterative detection and decoding process. The joint channel estimation and turbo detection-decoding scheme operating with the aid of the proposed BBSB-SDACE channel estimator is capable of approaching the performance of the near-capacity maximumlikelihood (ML) turbo transceiver associated with perfect CSI. This is achieved without increasing the complexity of the ML turbo detection and decoding process
Adaptive and Iterative Multi-Branch MMSE Decision Feedback Detection Algorithms for MIMO Systems
In this work, decision feedback (DF) detection algorithms based on multiple
processing branches for multi-input multi-output (MIMO) spatial multiplexing
systems are proposed. The proposed detector employs multiple cancellation
branches with receive filters that are obtained from a common matrix inverse
and achieves a performance close to the maximum likelihood detector (MLD).
Constrained minimum mean-squared error (MMSE) receive filters designed with
constraints on the shape and magnitude of the feedback filters for the
multi-branch MMSE DF (MB-MMSE-DF) receivers are presented. An adaptive
implementation of the proposed MB-MMSE-DF detector is developed along with a
recursive least squares-type algorithm for estimating the parameters of the
receive filters when the channel is time-varying. A soft-output version of the
MB-MMSE-DF detector is also proposed as a component of an iterative detection
and decoding receiver structure. A computational complexity analysis shows that
the MB-MMSE-DF detector does not require a significant additional complexity
over the conventional MMSE-DF detector, whereas a diversity analysis discusses
the diversity order achieved by the MB-MMSE-DF detector. Simulation results
show that the MB-MMSE-DF detector achieves a performance superior to existing
suboptimal detectors and close to the MLD, while requiring significantly lower
complexity.Comment: 10 figures, 3 tables; IEEE Transactions on Wireless Communications,
201
MIMO-aided near-capacity turbo transceivers: taxonomy and performance versus complexity
In this treatise, we firstly review the associated Multiple-Input Multiple-Output (MIMO) system theory and review the family of hard-decision and soft-decision based detection algorithms in the context of Spatial Division Multiplexing (SDM) systems. Our discussions culminate in the introduction of a range of powerful novel MIMO detectors, such as for example Markov Chain assisted Minimum Bit-Error Rate (MC-MBER) detectors, which are capable of reliably operating in the challenging high-importance rank-deficient scenarios, where there are more transmitters than receivers and hence the resultant channel-matrix becomes non-invertible. As a result, conventional detectors would exhibit a high residual error floor. We then invoke the Soft-Input Soft-Output (SISO) MIMO detectors for creating turbo-detected two- or three-stage concatenated SDM schemes and investigate their attainable performance in the light of their computational complexity. Finally, we introduce the powerful design tools of EXtrinsic Information Transfer (EXIT)-charts and characterize the achievable performance of the diverse near- capacity SISO detectors with the aid of EXIT charts
Single-RF spatial modulation requires single-carrier transmission: frequency-domain turbo equalization for dispersive channels
In this paper, we propose a broadband single-carrier (SC) spatial-modulation (SM) based multiple-input multipleoutput (MIMO) architecture relying on a soft-decision (SoD) frequency-domain equalization (FDE) receiver. We demonstrate that conventional orthogonal frequency-division multiplexing (OFDM)-based broadband transmissions are not readily suitable for the single–radio frequency (RF) assisted SM-MIMO schemes, since this scheme does not exhibit any substantial performance advantage over single-antenna transmissions. To circumvent this limitation, a low-complexity soft-decision (SoD) FDE algorithm based on the minimum mean-square error (MMSE) criterion is invoked for our broadband SC-based SM-MIMO scheme, which is capable of operating in a strongly dispersive channel having a long channel impulse response (CIR) at a moderate decoding complexity. Furthermore, our SoD FDE attains a near-capacity performance with the aid of a three-stage concatenated SC-based SM architecture
Coded DS-CDMA Systems with Iterative Channel Estimation and no Pilot Symbols
In this paper, we describe direct-sequence code-division multiple-access
(DS-CDMA) systems with quadriphase-shift keying in which channel estimation,
coherent demodulation, and decoding are iteratively performed without the use
of any training or pilot symbols. An expectation-maximization
channel-estimation algorithm for the fading amplitude, phase, and the
interference power spectral density (PSD) due to the combined interference and
thermal noise is proposed for DS-CDMA systems with irregular repeat-accumulate
codes. After initial estimates of the fading amplitude, phase, and interference
PSD are obtained from the received symbols, subsequent values of these
parameters are iteratively updated by using the soft feedback from the channel
decoder. The updated estimates are combined with the received symbols and
iteratively passed to the decoder. The elimination of pilot symbols simplifies
the system design and allows either an enhanced information throughput, an
improved bit error rate, or greater spectral efficiency. The interference-PSD
estimation enables DS-CDMA systems to significantly suppress interference.Comment: To appear, IEEE Transactions on Wireless Communication
- …