153 research outputs found

    Applications of parallel computing in robotics problems

    Get PDF
    "December 2013.""A Thesis presented to the Faculty of the Graduate School University of Missouri In Partial Fulfillment Of the Requirements for the Degree Master of Science."Thesis advisor: Dr. Guilherme N. DeSouza.Many typical robotics problems involve search in high-dimensional spaces, where real-time execution is hard to be achieved. This thesis presents two case studies of parallel computation in such robotics problems. More specifically, two problems of motion planning-the Inverse Kinematics of robotic manipulators and Path Planning for mobile robots-are investigated and the contributions of parallel algorithms are highlighted. For the Inverse Kinematics problem, a novel and fast solution is proposed for general serial manipulators. This new approach relies on the computation of multiple (parallel) numerical estimations of the inverse Jacobian while it selects the current best path to the desire con- figuration of the end-effector. Unlike other iterative methods, our method converges very quickly, achieving sub-millimeter accuracy in 20.48ms in average. We demonstrate such high accuracy and the real-time performance of our method by testing it with six different robots, at both non-singular and singular configurations, including a 7-DoF redundant robot. The algorithm is implemented in C/C++ using a configurable number of POSIX threads, and it can be easily expanded to use many-core GPUs. For the Path Planning problem, a solution to the problem of smooth path planning for mobile robots in dynamic and unknown environments is presented. A novel concept of Time-Warped Grids is introduced to predict the pose of obstacles on a grid-based map and avoid collisions. The algorithm is implemented using C/C++ and the CUDA programming environment, and combines stochastic estimation (Kalman filter), Harmonic Potential Fields and a Rubber Band model, and it translates naturally into the parallel paradigm of GPU programing. The proposed method was tested using several simulation scenarios for the Pioneer P3- DX robot, which demonstrated the robustness of the algorithm by finding the optimum path in terms of smoothness, distance, and collision-free either in static or dynamic environments, even with a very large number of obstacles.Includes bibliographical references (pages 70-78)

    Spherical Wrist Manipulator Local Planner for Redundant Tasks in Collaborative Environments

    Get PDF
    : Standard industrial robotic manipulators use well-established high performing technologies. However, such manipulators do not guarantee a safe Human-Robot Interaction (HRI), limiting their usage in industrial and medical applications. This paper proposes a novel local path planner for spherical wrist manipulators to control the execution of tasks where the manipulator number of joints is redundant. Such redundancy is used to optimize robot motion and dexterity. We present an intuitive parametrization of the end-effector (EE) angular motion, which decouples the rotation of the third joint of the wrist from the rest of the angular motions. Manipulator EE motion is controlled through a decentralized linear system with closed-loop architecture. The local planner integrates a novel collision avoidance strategy based on a potential repulsive vector applied to the EE. Contrary to classic potential field approaches, the collision avoidance algorithm considers the entire manipulator surface, enhancing human safety. The local path planner is simulated in three generic scenarios: (i) following a periodic reference, (ii) a random sequence of step signal references, and (iii) avoiding instantly introduced obstacles. Time and frequency domain analysis demonstrated that the developed planner, aside from better parametrizing redundant tasks, is capable of successfully executing the simulated paths (max error = 0.25°) and avoiding obstacles

    Robot Visual Servoing Using Discontinuous Control

    Full text link
    This work presents different proposals to deal with common problems in robot visual servoing based on the application of discontinuous control methods. The feasibility and effectiveness of the proposed approaches are substantiated by simulation results and real experiments using a 6R industrial manipulator. The main contributions are: - Geometric invariance using sliding mode control (Chapter 3): the defined higher-order invariance is used by the proposed approaches to tackle problems in visual servoing. Proofs of invariance condition are presented. - Fulfillment of constraints in visual servoing (Chapter 4): the proposal uses sliding mode methods to satisfy mechanical and visual constraints in visual servoing, while a secondary task is considered to properly track the target object. The main advantages of the proposed approach are: low computational cost, robustness and fully utilization of the allowed space for the constraints. - Robust auto tool change for industrial robots using visual servoing (Chapter 4): visual servoing and the proposed method for constraints fulfillment are applied to an automated solution for tool changing in industrial robots. The robustness of the proposed method is due to the control law of the visual servoing, which uses the information acquired by the vision system to close a feedback control loop. Furthermore, sliding mode control is simultaneously used in a prioritized level to satisfy the aforementioned constraints. Thus, the global control accurately places the tool in the warehouse, but satisfying the robot constraints. - Sliding mode controller for reference tracking (Chapter 5): an approach based on sliding mode control is proposed for reference tracking in robot visual servoing using industrial robot manipulators. The novelty of the proposal is the introduction of a sliding mode controller that uses a high-order discontinuous control signal, i.e., joint accelerations or joint jerks, in order to obtain a smoother behavior and ensure the robot system stability, which is demonstrated with a theoretical proof. - PWM and PFM for visual servoing in fully decoupled approaches (Chapter 6): discontinuous control based on pulse width and pulse frequency modulation is proposed for fully decoupled position based visual servoing approaches, in order to get the same convergence time for camera translation and rotation. Moreover, other results obtained in visual servoing applications are also described.Este trabajo presenta diferentes propuestas para tratar problemas habituales en el control de robots por realimentación visual, basadas en la aplicación de métodos de control discontinuos. La viabilidad y eficacia de las propuestas se fundamenta con resultados en simulación y con experimentos reales utilizando un robot manipulador industrial 6R. Las principales contribuciones son: - Invariancia geométrica utilizando control en modo deslizante (Capítulo 3): la invariancia de alto orden definida aquí es utilizada después por los métodos propuestos, para tratar problemas en control por realimentación visual. Se apuertan pruebas teóricas de la condición de invariancia. - Cumplimiento de restricciones en control por realimentación visual (Capítulo 4): esta propuesta utiliza métodos de control en modo deslizante para satisfacer restricciones mecánicas y visuales en control por realimentación visual, mientras una tarea secundaria se encarga del seguimiento del objeto. Las principales ventajas de la propuesta son: bajo coste computacional, robustez y plena utilización del espacio disponible para las restricciones. - Cambio de herramienta robusto para un robot industrial mediante control por realimentación visual (Capítulo 4): el control por realimentación visual y el método propuesto para el cumplimiento de las restricciones se aplican a una solución automatizada para el cambio de herramienta en robots industriales. La robustez de la propuesta radica en el uso del control por realimentación visual, que utiliza información del sistema de visión para cerrar el lazo de control. Además, el control en modo deslizante se utiliza simultáneamente en un nivel de prioridad superior para satisfacer las restricciones. Así pues, el control es capaz de dejar la herramienta en el intercambiador de herramientas de forma precisa, a la par que satisface las restricciones del robot. - Controlador en modo deslizante para seguimiento de referencia (Capítulo 5): se propone un enfoque basado en el control en modo deslizante para seguimiento de referencia en robots manipuladores industriales controlados por realimentación visual. La novedad de la propuesta radica en la introducción de un controlador en modo deslizante que utiliza la señal de control discontinua de alto orden, i.e. aceleraciones o jerks de las articulaciones, para obtener un comportamiento más suave y asegurar la estabilidad del sistema robótico, lo que se demuestra con una prueba teórica. - Control por realimentación visual mediante PWM y PFM en métodos completamente desacoplados (Capítulo 6): se propone un control discontinuo basado en modulación del ancho y frecuencia del pulso para métodos completamente desacoplados de control por realimentación visual basados en posición, con el objetivo de conseguir el mismo tiempo de convergencia para los movimientos de rotación y traslación de la cámara . Además, se presentan también otros resultados obtenidos en aplicaciones de control por realimentación visual.Aquest treball presenta diferents propostes per a tractar problemes habituals en el control de robots per realimentació visual, basades en l'aplicació de mètodes de control discontinus. La viabilitat i eficàcia de les propostes es fonamenta amb resultats en simulació i amb experiments reals utilitzant un robot manipulador industrial 6R. Les principals contribucions són: - Invariància geomètrica utilitzant control en mode lliscant (Capítol 3): la invariància d'alt ordre definida ací és utilitzada després pels mètodes proposats, per a tractar problemes en control per realimentació visual. S'aporten proves teòriques de la condició d'invariància. - Compliment de restriccions en control per realimentació visual (Capítol 4): aquesta proposta utilitza mètodes de control en mode lliscant per a satisfer restriccions mecàniques i visuals en control per realimentació visual, mentre una tasca secundària s'encarrega del seguiment de l'objecte. Els principals avantatges de la proposta són: baix cost computacional, robustesa i plena utilització de l'espai disponible per a les restriccions. - Canvi de ferramenta robust per a un robot industrial mitjançant control per realimentació visual (Capítol 4): el control per realimentació visual i el mètode proposat per al compliment de les restriccions s'apliquen a una solució automatitzada per al canvi de ferramenta en robots industrials. La robustesa de la proposta radica en l'ús del control per realimentació visual, que utilitza informació del sistema de visió per a tancar el llaç de control. A més, el control en mode lliscant s'utilitza simultàniament en un nivell de prioritat superior per a satisfer les restriccions. Així doncs, el control és capaç de deixar la ferramenta en l'intercanviador de ferramentes de forma precisa, a la vegada que satisfà les restriccions del robot. - Controlador en mode lliscant per a seguiment de referència (Capítol 5): es proposa un enfocament basat en el control en mode lliscant per a seguiment de referència en robots manipuladors industrials controlats per realimentació visual. La novetat de la proposta radica en la introducció d'un controlador en mode lliscant que utilitza senyal de control discontínua d'alt ordre, i.e. acceleracions o jerks de les articulacions, per a obtindre un comportament més suau i assegurar l'estabilitat del sistema robòtic, la qual cosa es demostra amb una prova teòrica. - Control per realimentació visual mitjançant PWM i PFM en mètodes completament desacoblats (Capítol 6): es proposa un control discontinu basat en modulació de l'ample i la freqüència del pols per a mètodes completament desacoblats de control per realimentació visual basats en posició, amb l'objectiu d'aconseguir el mateix temps de convergència per als moviments de rotació i translació de la càmera. A més, es presenten també altres resultats obtinguts en aplicacions de control per realimentació visual.Muñoz Benavent, P. (2017). Robot Visual Servoing Using Discontinuous Control [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90430TESI

    MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics

    Full text link
    El libro de actas recoge las aportaciones de los autores a través de los correspondientes artículos a la Dinámica de Sistemas Multicuerpo y la Mecatrónica (Musme). Estas disciplinas se han convertido en una importante herramienta para diseñar máquinas, analizar prototipos virtuales y realizar análisis CAD sobre complejos sistemas mecánicos articulados multicuerpo. La dinámica de sistemas multicuerpo comprende un gran número de aspectos que incluyen la mecánica, dinámica estructural, matemáticas aplicadas, métodos de control, ciencia de los ordenadores y mecatrónica. Los artículos recogidos en el libro de actas están relacionados con alguno de los siguientes tópicos del congreso: Análisis y síntesis de mecanismos ; Diseño de algoritmos para sistemas mecatrónicos ; Procedimientos de simulación y resultados ; Prototipos y rendimiento ; Robots y micromáquinas ; Validaciones experimentales ; Teoría de simulación mecatrónica ; Sistemas mecatrónicos ; Control de sistemas mecatrónicosUniversitat Politècnica de València (2011). MUSME 2011 4 th International Symposium on Multibody Systems and Mechatronics. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/13224Archivo delegad

    Surgical Subtask Automation for Intraluminal Procedures using Deep Reinforcement Learning

    Get PDF
    Intraluminal procedures have opened up a new sub-field of minimally invasive surgery that use flexible instruments to navigate through complex luminal structures of the body, resulting in reduced invasiveness and improved patient benefits. One of the major challenges in this field is the accurate and precise control of the instrument inside the human body. Robotics has emerged as a promising solution to this problem. However, to achieve successful robotic intraluminal interventions, the control of the instrument needs to be automated to a large extent. The thesis first examines the state-of-the-art in intraluminal surgical robotics and identifies the key challenges in this field, which include the need for safe and effective tool manipulation, and the ability to adapt to unexpected changes in the luminal environment. To address these challenges, the thesis proposes several levels of autonomy that enable the robotic system to perform individual subtasks autonomously, while still allowing the surgeon to retain overall control of the procedure. The approach facilitates the development of specialized algorithms such as Deep Reinforcement Learning (DRL) for subtasks like navigation and tissue manipulation to produce robust surgical gestures. Additionally, the thesis proposes a safety framework that provides formal guarantees to prevent risky actions. The presented approaches are evaluated through a series of experiments using simulation and robotic platforms. The experiments demonstrate that subtask automation can improve the accuracy and efficiency of tool positioning and tissue manipulation, while also reducing the cognitive load on the surgeon. The results of this research have the potential to improve the reliability and safety of intraluminal surgical interventions, ultimately leading to better outcomes for patients and surgeons

    A control architecture and human interface for agile, reconfigurable micro aerial vehicle formations

    Full text link
    This thesis considers the problem of controlling a group of micro aerial vehicles for agile maneuvering cooperatively, or distributively. We first introduce the background and motivation for micro aerial vehicles, especially for the popular multi-rotor aerial vehicle platform. Then, we discuss the dynamics of quadrotor helicopters. A quadrotor is a specific kind of multi-rotor aerial vehicle with a special property called differential flatness, which simplifies the algorithm of trajectory planning, such that, instead of planning a trajectory in a 12-dimensional state space and 4-dimensional input space, we only need to plan the trajectory in 4-dimensional, so called, flat output space, while the 12-dimensional state and 4-dimensional input can be recovered from a mapping called endogenous transformation. We propose a series of approaches to achieve agile maneuvering of a dynamic quadrotor formation, from controlling a single quadrotor in an artificial vector field, to controlling a group of quadrotors in a Virtual Rigid Body (VRB) framework, to balancing the effect between the human control and autonomy for collision avoidance, and to fast on-line distributed collision avoidance with Buffered Voronoi Cells (BVC). In the vector field method, we generate velocity, acceleration, jerk and snap fields, depending on the tasks, or the positions of obstacles, such that a single quadrotor can easily find its required state and input from the endogenous transformation in order to track the artificial vector field. Next, with a Virtual Rigid Body framework, we let a group of quadrotors follow a single control command while also keeping a required formation, or even reconfigure from one formation to another. The Virtual Rigid Body framework decouples the trajectory planning problem into two sub-problems. Then we consider the problem of collision avoidance of the quadrotor formation when it is meanwhile tele-operated by a single human operator. The autonomy with collision avoidance algorithm, based on the vector field methods for a single quadrotor, is an assistive portion of the quadrotor formation controller, such that the human operator can focus on his/her high-level tasks, leaving the low-level collision avoidance task be handled automatically. We also consider the full autonomy problem of quadrotor formations when reconfiguring from one formation to another by developing a fast, on-line distributed collision avoidance algorithm using Buffered Voronoi Cells (BVCs). Our BVC based collision avoidance algorithm only requires sensed relative position, rather than relative position and velocity, while the computational complexity is comparable to other methods like velocity obstacles. At last, we introduce our experimental quadrotor platform which is built from PixHawk flight controller and Odroid-XU4 single-board computer. The hardware and software architecture of this multiple-quadrotor platform is described in detail so that our platform can easily be adopted and extended with different purposes. Our conclusion remark and discussion of future work are also given in this thesi

    Bio-inspired, Varying Manifold Based Method With Enhanced Initial Guess Strategies For Single Vehicle\u27s Optimal Trajectory Planning

    Get PDF
    Trajectory planning is important in many applications involving unmanned aerial vehicles, underwater vehicles, spacecraft, and industrial manipulators. It is still a challenging task to rapidly find an optimal trajectory while taking into account dynamic and environmental constraints. In this dissertation, a unified, varying manifold based optimal trajectory planning method inspired by several predator-prey relationships is investigated to tackle this challenging problem. Biological species, such as hoverflies, ants, and bats, have developed many efficient hunting strategies. It is hypothesized that these types of predators only move along paths in a carefully selected manifold based on the prey’s motion in some of their hunting activities. Inspired by these studies, the predator-prey relationships are organized into a unified form and incorporated into the trajectory optimization formulation, which can reduce the computational cost in solving nonlinear constrained optimal trajectory planning problems. Specifically, three motion strategies are studied in this dissertation: motion camouflage, constant absolute target direction, and local pursuit. Necessary conditions based on the speed and obstacle avoidance constraints are derived. Strategies to tune initial guesses are proposed based on these necessary conditions to enhance the convergence rate and reduce the computational cost of the motion camouflage inspired strategy. The following simulations have been conducted to show the advantages of the proposed methods: a supersonic aircraft minimum-time-to-climb problem, a ground robot obstacle avoidance problem, and a micro air vehicle minimum time trajectory problem. The results show that the proposed methods can find the optimal solution with higher success rate and faster iv convergent speed as compared with some other popular methods. Among these three motion strategies, the method based on the local pursuit strategy has a relatively higher success rate when compared to the other two. In addition, the optimal trajectory planning method is embedded into a receding horizon framework with unknown parameters updated in each planning horizon using an Extended Kalman Filte

    Intelligent collision avoidance system for industrial manipulators

    Get PDF
    Mestrado de dupla diplomação com a UTFPR - Universidade Tecnológica Federal do ParanáThe new paradigm of Industry 4.0 demand the collaboration between robot and humans. They could help (human and robot) and collaborate each other without any additional security, unlike other conventional manipulators. For this, the robot should have the ability of acquire the environment and plan (or re-plan) on-the-fly the movement avoiding the obstacles and people. This work proposes a system that acquires the space of the environment, based on a Kinect sensor, verifies the free spaces generated by a Point Cloud and executes the trajectory of manipulators in these free spaces. The simulation system should perform the path planning of a UR5 manipulator for pick-and-place tasks, while avoiding the objects around it, based on the point cloud from Kinect. And due to the results obtained in the simulation, it was possible to apply this system in real situations. The basic structure of the system is the ROS software, which facilitates robotic applications with a powerful set of libraries and tools. The MoveIt! and Rviz are examples of these tools, with them it was possible to carry out simulations and obtain planning results. The results are reported through logs files, indicating whether the robot motion plain was successful and how many manipulator poses were needed to create the final movement. This last step, allows to validate the proposed system, through the use of the RRT and PRM algorithms. Which were chosen because they are most used in the field of robot path planning.Os novos paradigmas da Indústria 4.0 exigem a colaboração entre robôs e seres humanos. Estes podem ajudar e colaborar entre si sem qualquer segurança adicional, ao contrário de outros manipuladores convencionais. Para isto, o robô deve ter a capacidade de adquirir o meio ambiente e planear (ou re-planear) on-the-fly o movimento evitando obstáculos e pessoas. Este trabalho propõe um sistema que adquire o espaço do ambiente através do sensor Kinect. O sistema deve executar o planeamento do caminho de manipuladores que possuem movimentos de um ponto a outro (ponto inicial e final), evitando os objetos ao seu redor, com base na nuvem de pontos gerada pelo Kinect. E devido aos resultados obtidos na simulação, foi possível aplicar este sistema em situações reais. A estrutura base do sistema é o software ROS, que facilita aplicações robóticas com um poderoso conjunto de bibliotecas e ferramentas. O MoveIt! e Rviz são exemplos destas ferramentas, com elas foi possível realizar simulações e conseguir os resultados de planeamento livre de colisões. Os resultados são informados por meio de arquivos logs, indicando se o movimento do UR5 foi realizado com sucesso e quantas poses do manipulador foram necessárias criar para atingir o movimento final. Este último passo, permite validar o sistema proposto, através do uso dos algoritmos RRT e PRM. Que foram escolhidos por serem mais utilizados no ramo de planeamento de trajetória para robôs

    Real-time path planning for robot arms.

    Get PDF
    SIGLEAvailable from British Library Document Supply Centre- DSC:D80326 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

    System Design, Motion Modelling and Planning for a Recon figurable Wheeled Mobile Robot

    Get PDF
    Over the past ve decades the use of mobile robotic rovers to perform in-situ scienti c investigations on the surfaces of the Moon and Mars has been tremendously in uential in shaping our understanding of these extraterrestrial environments. As robotic missions have evolved there has been a greater desire to explore more unstructured terrain. This has exposed mobility limitations with conventional rover designs such as getting stuck in soft soil or simply not being able to access rugged terrain. Increased mobility and terrain traversability are key requirements when considering designs for next generation planetary rovers. Coupled with these requirements is the need to autonomously navigate unstructured terrain by taking full advantage of increased mobility. To address these issues, a high degree-of-freedom recon gurable platform that is capable of energy intensive legged locomotion in obstacle-rich terrain as well as wheeled locomotion in benign terrain is proposed. The complexities of the planning task that considers the high degree-of-freedom state space of this platform are considerable. A variant of asymptotically optimal sampling-based planners that exploits the presence of dominant sub-spaces within a recon gurable mobile robot's kinematic structure is proposed to increase path quality and ensure platform safety. The contributions of this thesis include: the design and implementation of a highly mobile planetary analogue rover; motion modelling of the platform to enable novel locomotion modes, along with experimental validation of each of these capabilities; the sampling-based HBFMT* planner that hierarchically considers sub-spaces to better guide search of the complete state space; and experimental validation of the planner with the physical platform that demonstrates how the planner exploits the robot's capabilities to uidly transition between various physical geometric con gurations and wheeled/legged locomotion modes
    corecore