2,184 research outputs found

    Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

    Get PDF
    The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

    Domain-specific and reconfigurable instruction cells based architectures for low-power SoC

    Get PDF

    Developing large-scale field-programmable analog arrays for rapid prototyping

    Get PDF
    Field-programmable analog arrays (FPAAs) provide a method for rapidly prototyping analog systems. While currently available FPAAs vary in architecture and interconnect design, they are often limited in size and flexibility. For FPAAs to be as useful and marketable as modern digital reconfigurable devices, new technologies must be explored to provide area efficient, accurately programmable analog circuitry that can be easily integrated into a larger digital/mixed signal system. By leveraging recent advances in floating gate transistors, a new generation of FPAAs are achievable that will dramatically advance the current state of the art in terms of size, functionality, and flexibility

    Template-based embedded reconfigurable computing

    Get PDF
    XIV+212hlm.;24c

    The Design of a System Architecture for Mobile Multimedia Computers

    Get PDF
    This chapter discusses the system architecture of a portable computer, called Mobile Digital Companion, which provides support for handling multimedia applications energy efficiently. Because battery life is limited and battery weight is an important factor for the size and the weight of the Mobile Digital Companion, energy management plays a crucial role in the architecture. As the Companion must remain usable in a variety of environments, it has to be flexible and adaptable to various operating conditions. The Mobile Digital Companion has an unconventional architecture that saves energy by using system decomposition at different levels of the architecture and exploits locality of reference with dedicated, optimised modules. The approach is based on dedicated functionality and the extensive use of energy reduction techniques at all levels of system design. The system has an architecture with a general-purpose processor accompanied by a set of heterogeneous autonomous programmable modules, each providing an energy efficient implementation of dedicated tasks. A reconfigurable internal communication network switch exploits locality of reference and eliminates wasteful data copies

    A polymorphic hardware platform

    Get PDF
    In the domain of spatial computing, it appears that platforms based on either reconfigurable datapath units or on hybrid microprocessor/logic cell organizations are in the ascendancy as they appear to offer the most efficient means of providing resources across the greatest range of hardware designs. This paper encompasses an initial exploration of an alternative organization. It looks at the effect of using a very fine-grained approach based on a largely undifferentiated logic cell that can be configured to operate as a state element, logic or interconnect - or combinations of all three. A vertical layout style hides the overheads imposed by reconfigurability to an extent where very fine-grained organizations become a viable option. It is demonstrated that the technique can be used to develop building blocks for both synchronous and asynchronous circuits, supporting the development of hybrid architectures such as globally asynchronous, locally synchronous

    Domain specific high performance reconfigurable architecture for a communication platform

    Get PDF

    Asynchronous techniques for new generation variation-tolerant FPGA

    Get PDF
    PhD ThesisThis thesis presents a practical scenario for asynchronous logic implementation that would benefit the modern Field-Programmable Gate Arrays (FPGAs) technology in improving reliability. A method based on Asynchronously-Assisted Logic (AAL) blocks is proposed here in order to provide the right degree of variation tolerance, preserve as much of the traditional FPGAs structure as possible, and make use of asynchrony only when necessary or beneficial for functionality. The newly proposed AAL introduces extra underlying hard-blocks that support asynchronous interaction only when needed and at minimum overhead. This has the potential to avoid the obstacles to the progress of asynchronous designs, particularly in terms of area and power overheads. The proposed approach provides a solution that is complementary to existing variation tolerance techniques such as the late-binding technique, but improves the reliability of the system as well as reducing the design’s margin headroom when implemented on programmable logic devices (PLDs) or FPGAs. The proposed method suggests the deployment of configurable AAL blocks to reinforce only the variation-critical paths (VCPs) with the help of variation maps, rather than re-mapping and re-routing. The layout level results for this method's worst case increase in the CLB’s overall size only of 6.3%. The proposed strategy retains the structure of the global interconnect resources that occupy the lion’s share of the modern FPGA’s soft fabric, and yet permits the dual-rail iv completion-detection (DR-CD) protocol without the need to globally double the interconnect resources. Simulation results of global and interconnect voltage variations demonstrate the robustness of the method

    Dynamically reconfigurable asynchronous processor

    Get PDF
    The main design requirements for today's mobile applications are: · high throughput performance. · high energy efficiency. · high programmability. Until now, the choice of platform has often been limited to Application-Specific Integrated Circuits (ASICs), due to their best-of-breed performance and power consumption. The economies of scale possible with these high-volume markets have traditionally been able to hide the high Non-Recurring Engineering (NRE) costs required for designing and fabricating new ASICs. However, with the NREs and design time escalating with each generation of mobile applications, this practice may be reaching its limit. Designers today are looking at programmable solutions, so that they can respond more rapidly to changes in the market and spread costs over several generations of mobile applications. However, there have been few feasible alternatives to ASICs: Digital Signals Processors (DSPs) and microprocessors cannot meet the throughput requirements, whereas Field-Programmable Gate Arrays (FPGAs) require too much area and power. Coarse-grained dynamically reconfigurable architectures offer better solutions for high throughput applications, when power and area considerations are taken into account. One promising example is the Reconfigurable Instruction Cell Array (RICA). RICA consists of an array of cells with an interconnect that can be dynamically reconfigured on every cycle. This allows quite complex datapaths to be rendered onto the fabric and executed in a single configuration - making these architectures particularly suitable to stream processing. Furthermore, RICA can be programmed from C, making it a good fit with existing design methodologies. However the RICA architecture has a drawback: poor scalability in terms of area and power. As the core gets bigger, the number of sequential elements in the array must be increased significantly to maintain the ability to achieve high throughputs through pipelining. As a result, a larger clock tree is required to synchronise the increased number of sequential elements. The clock tree therefore takes up a larger percentage of the area and power consumption of the core. This thesis presents a novel Dynamically Reconfigurable Asynchronous Processor (DRAP), aimed at high-throughput mobile applications. DRAP is based on the RICA architecture, but uses asynchronous design techniques - methods of designing digital systems without clocks. The absence of a global clock signal makes DRAP more scalable in terms of power and area overhead than its synchronous counterpart. The DRAP architecture maintains most of the benefits of custom asynchronous design, whilst also providing programmability via conventional high-level languages. Results show that the DRAP processor delivers considerably lower power consumption when compared to a market-leading Very Long Instruction Word (VLIW) processor and a low-power ARM processor. For example, DRAP resulted in a reduction in power consumption of 20 times compared to the ARM7 processor, and 29 times compared to the TIC64x VLIW, when running the same benchmark capped to the same throughput and for the same process technology (0.13Όm). When compared to an equivalent RICA design, DRAP was up to 22% larger than RICA but resulted in a power reduction of up to 1.9 times. It was also capable of achieving up to 2.8 times higher throughputs than RICA for the same benchmarks
    • 

    corecore