42 research outputs found

    Tunable microwave filters using ferroelectric thin films

    Get PDF
    Frequency agile microwave devices based on Barium Strontium Titanate (BST) thin films have gained a lot of interest in recent years. The frequency agility of the ferroelectric devices is based on the external DC electric field controlled permittivity of BST thin film. In this research work, several tunable microwave filters incorporating BST thin film varactors operating in a frequency range between 1 GHz and 25 GHz are designed, tested and analysed. A lumped element lowpass filter incorporating integrated meander line inductors and BST parallel plate capacitors is implemented on a high resistivity silicon substrate and demonstrates 32.1 % tuning of the cut-off frequency at 15 V. A combline bandpass filter employing integrated BST parallel plate varactors as tuning elements is implemented on a MgO substrate and shows a reasonable tuning from about 8 GHz to 12 GHz with 10 V bias of only one resonator. Two pole and four pole coupled resonator bandpass filters with discrete BST or GaAs varactors as tuning elements are implemented in a frequency range of 1 - 3 GHz. The filters based on BST parallel plate capacitors show an insertion loss in line with the GaAs filters, which is also the lowest insertion loss of BST filters ever reported. Future work on improving the BST film and metal film loss at tens of gigahertz range is also discussed

    Tunable Superconducting Microwave Filters

    Get PDF
    Adaptive microwave systems can benefit from the use of low loss tunable microwave filters. Realizing these tunable filters that show low loss characteristics can be very challenging. The proper materials, tuning elements, and filter designs need to be considered when creating a low loss tunable filter. The integration of low loss microelectromechanical systems (MEMS) and superconducting circuits is one method of achieving these types of tunable filters. The thesis introduces new multi-layer low temperature superconducting (LTS) filters and diplexers and novel topologies for tunable filters and switched multiplexers. An efficient method of designing such filters is proposed. A fabrication process to monolithically integrate MEMS devices with high temperature superconducting (HTS) circuits is also investigated in this thesis. The reflected group delay method, usually used for filter tuning, is further developed for use in designing microwave filters. It is advantageous in the design of filters to have electromagnetic simulation results that will correlate well to the fabricated microwave filters. A correction factor is presented for use with the reflected group delay method so the group delay needs to be matched to the appropriate value at the center frequency of the filter and be symmetric about the center frequency of the filter. As demonstrated with an ideal lumped element filter, the group delay method can be implemented when a closed form expression for the circuit is not known. An 8-pole HTS filter design and an 8-pole multi-layer LTS filter design demonstrate the use of the reflected group delay method. Low temperature superconducting filters, couplers and diplexers are designed and fabricated using a multilayer niobium fabrication process traditionally used for superconducting digital microelectronics. The feasibility of realizing highly miniaturized microwave niobium devices allows for the integration of superconducting digital microelectronics circuits and analog microwave devices on a single chip. Microwave devices such as bandpass filters, lowpass filters, bandstop filters, quadrature hybrids, and resistive loads are all demonstrated experimentally. New tunable filter designs are presented that can make use of MEMS switches. A manifold-coupled switched multiplexer that allows for 2^N possible states is presented. The tunable multiplexer has N filters connected to two manifolds and has embedded switches, which detune certain resonators within the filters to switch between ON and OFF states for each channel. The new concept is demonstrated with a diplexer design and two 3-pole coplanar filters. The concept is further developed through test results of a fabricated HTS triplexer and electromagnetic simulations to demonstrate a superconducting manifold-coupled switched triplexer. Another filter design is presented that makes use of switches placed only on the resonators of the filters. This filter design has N possible states and the absolute bandwidth can be kept constant for all N states. Finally, the integration of HTS circuits and MEMS devices is investigated to realize low loss tunable microwave filters. The hybrid integration is first performed through the integration of an HTS microstrip filter and commercially available RF MEMS switches. A fabrication process to monolithically integrate MEMS devices and high temperature superconducting circuits is then investigated. The fabrication process includes a titanium tungsten layer, which acts as both a resistive layer and an adhesion for the dielectric layer, an amorphous silicon dielectric layer, a photoresist sacrificial layer, and the top gold layer. The fabrication process is built up on a wafer with a thin film of a high temperature superconducting material covered with a thin film of gold. Several processes are tested to ensure that the superconducting properties of the thin film are not affected during the MEMS fabrication process

    Recent Techniques in Design and Implementation of Microwave Planar Filters

    Get PDF
    This paper details the techniques and initiatives made recently for improved response and simultaneous development of microwave planar filters. Although the objective of all the techniques is to design low cost filters with reduced dimensions, compact size with better frequency response, the methodological approaches are quite variant. The paper has gone through extensive analysis of all these techniques, their concept and design procedures

    Development of planar filters and diplexers for wireless transceiver front ends

    Get PDF
    The central theme of this work is the design of compact microstrip bandpass filters and diplexers and the investigation of applications of these circuits in integrated transceiver RF front-end. The core of this thesis therefore presents the following stages of the work: - Analysis of coupled pseudo-interdigital resonators and lines; formulation of approximate transmission zero conditions and the investigation of coupling between these two resonators and related structures. - Development of compact, low loss and high selectivity microstrip pseudointerdigital bandpass filters. The design procedure of the filter consists of three simple steps, starting from the design of a parallel-coupled bandpass filter using the image parameter method applied to coupled microstrip lines. The development of compact microstrip diplexers composed of these filters uses the optimized common-transformer diplexing technique. An experimental verification of the developed filters and diplexers is made. - Investigation of the use of stepped impedance resonators (SIR) for the design of pseudo-interdigital bandpass filters with advanced characteristics. The design of compact dual-band filter using SIR. The investigation of possible improvement of the stopband of bandpass filters using bandstop generating structures. The application of SIR, defected ground structures (DGS), spur-lines, and opencircuited stubs in the design of compact bandpass filters with improved stopband. - The application of the proposed filters and diplexers in the design of integrated antenna filters and antenna diplexers. Improvement of performance of patch antennas, such as suppression of spurious harmonics of single-band antenna and improvement of bandwidth and selectivity of dual-band antenna, as a result of integration with filters. Separation of antennas’ bands and reduction of component count in integrated antenna diplexer

    Design and Fabrication of Ferroelectric Thin Film based Microwave Miniature Tunable Devices

    Get PDF
    Master'sMASTER OF SCIENC

    Microwave Filters in Planar and Hybrid Technologies with Advanced Responses

    Full text link
    [ES] La presente tesis doctoral tiene como principal objetivo el estudio, diseño, desarrollo y fabricación de nuevos dispositivos pasivos de microondas, tales como filtros y multiplexores con respuestas avanzadas para aplicaciones de alto valor añadido (i.e. comerciales, militares, espacio); orientados a distintos servicios, actuales y futuros, en sistemas inalámbricos de comunicación. Además, esta investigación se centrará en el desarrollo de filtros encapsulados de montaje superficial y con un elevado grado de miniaturización. Para ello, se propone investigar distintas técnicas que consigan respuestas muy selectivas o con unas características exigentes en rechazo (mediante la flexible introducción de ceros de transmisión), así como una excelente planaridad en banda (aplicando técnicas tales como la mejora del Q o el diseño de filtros con pérdidas, lossy filters), obteniendo de este modo respuestas mejoradas, con respecto a soluciones conocidas, en los componentes de microondas desarrollados. De forma general, la metodología seguida se iniciará con una búsqueda y conocimiento del estado del arte sobre cada uno de los temas que se acometerán en esta tesis. Tras ello, se establecerá un procedimiento de síntesis que permitirá acometer de forma teórica los objetivos y especificaciones a conseguir en cada caso. Con ello, se establecerán las bases para iniciar el proceso de diseño, incluyendo co-simulación circuital/electromagnética y optimización que permitirán, en última instancia, implementar la solución planteada en cada caso de aplicación concreto. Finalmente, la demostración y validez de todas las investigaciones realizadas se llevará a cabo mediante la fabricación y caracterización experimental de distintos prototipos.[CA] La present tesi doctoral té com a principal objectiu l'estudi, disseny, desenvolupament I fabricació de nous dispositius passius de microones, com ara filtres i multiplexors amb respostes avançades per a aplicacions d'alt valor afegit, (comercials, militars, espai); orientats a oferir diferents serveis, actuals i futurs, en els diferents sistemes sense fils de comunicació. A més, aquesta investigació es centrarà en el desenvolupament de filtres encapsulats de muntatge superficial i amb un elevat grau de miniaturització. Per a això, es proposa investigar diferents tècniques que aconsegueixin respostes molt selectives o amb unes característiques exigents en rebuig (mitjançant la flexible introducció de zeros de transmissió), així com una excel·lent planaritat en banda (aplicant tècniques com ara la millora de l'Q o el disseny de filtres amb perdues, lossy filters), obtenint d'aquesta manera respostes millorades, respecte solucions conegudes, en els components de micrones desenvolupats. De forma general, la metodologia seguida s'iniciarà amb una recerca i coneixement de l'estat de l'art sobre cadascun dels temes que s'escometran en aquesta tesi. Després d'això, s'establirà un procediment de síntesi que permetrà escometre de forma teòrica els objectiusi especificacions a aconseguir en cada cas. Amb això, s'establiran les bases per iniciar el procés de disseny, amb co-simulació circuital / electromagnètica i optimització que permetran, en última instància, implementar la solució plantejada en cada cas d'aplicació concret. Finalment, la demostració i validesa de totes les investigacions realitzades es durà a terme mitjançant la fabricació i caracterització experimental de diferents prototips.[EN] The main objective of this doctoral thesis is the study, design, development and manufacture of new passive microwave components, such as filters and multiplexers with advanced responses for commercials, military and space applications; oriented to other different services, in current and future wireless communication systems. In addition, this research will focus on the development of surface-mounted encapsulated filters with a high degree of miniaturization. With this purpose, it is proposed to investigate different techniques that achieve highly selective responses or with demanding characteristics in rejection (through the flexible introduction of transmission zeros), as well as an excellent in-band planarity (applying techniques such as the Q enhancement or lossy filters), thus obtaining improved responses, with respect to known solutions, in the developed microwave components. In general, the followed methodology will begin with a search and knowledge of the state of the art on each of the topics addressed in this thesis. After that, a synthesis procedure will be established, which will allow the achievement of the objectives and specifications in a theoretical way, for each case. With this, the bases will be established to start the design process, with circuital and electromagnetic co-simulations and optimizations that will allow, ultimately, to implement the proposed solution, in every application case, specifically. Finally, the demonstration and validity of all the investigations will be carried out through the manufacture and experimental characterization of different prototypes.Marín Martínez, S. (2022). Microwave Filters in Planar and Hybrid Technologies with Advanced Responses [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/18894

    Microwave Interference Cancellation System

    Get PDF
    A microwave interference cancellation system is presented in this thesis. The technique achieves high Tx/Rx isolation with relatively low degree filters. A four-port diplexer consists of two back-to-back three-port diplexers combined with a 180° phase shift in one branch. High signal isolation between Tx and Rx module is achievable by only using second-order filter topology and the design technique is based on amplitude and phase cancellation between two diplexer branches of the four-port diplexer. Three and four-port networks are intensively analysed and synthesised for solving S-parameter equations. The four-port diplexer exploits the microstrip open-loop structure. A four-port microstrip diplexer for RF interference rejection is presented in IMT-2000 applications whereas device miniaturisation and low infrastructure cost are required. The microstrip-open loop structure with coupled-feed and tapped-feed are designed for alternative techniques and cost reduction. A 180° phase shift in one branch can be achieved by delayed transmission line. The simulated microstrip four-port network is designed at the centre frequency of Tx/Rx at 1.95 GHz and 2.14 GHz, respectively. An alternative technology to reduce overall signal losses and increase power handling with the same or better isolation compared to the four-port microstrip technology is four-port combline coaxial resonator structures. To achieve filter design with a 180° different phase shift, the positive (90° inverter) and negative (-90° inverter) coupled filters are required. The design frequencies of the four-port combline diplexer are 1.73 GHz and 2.13 GHz for Rx and Tx modules, respectively. Two different designs of four-port diplexer prototypes, based on filter designs with similar and dissimilar Q-factors, are fabricated and measured to verify the new design technique. Finally, microwave interference cancellation techniques can be used in wireless communication systems where small size, low losses and low complexity are required

    Analysis and Design of a Substrate Integrated Waveguide Multi-Coupled Resonator Diplexer

    Get PDF
    A microwave diplexer achieved by coupling a section of a dual-band bandpass filter onto a section of two single-bands (i.e. transmit and receive) bandpass filters is presented. This design eliminates the need for employing external non-resonant junctions in diplexer design, as opposed to the conventional design approach which requires separate non-resonant junctions for energy distribution. The use of separate non-resonant junctions in diplexer design increases the design complexity, as well as gives rise to bulky diplexer devices. The proposed design also removes the too much reliance on the evaluation of suitable characteristic polynomials to achieve a diplexer. Though the evaluation of complex polynomials to achieve a diplexer is seen as a viable option, the technique is hugely dependent on optimisations which come with loads of uncertainties. This thesis relies on well-established design formulations to increase design reliability, as well as simplicity. A 10-pole (10ᵗʰ order) microwave diplexer circuit has been successfully designed, simulated, manufactured and measured. The measured results have been used to validate the circuit model and the electromagnetic (EM) simulated results. The diplexer is composed of 2 poles from a dual-band bandpass filter, 4 poles from a transmit bandpass filter and the remaining 4 poles from a receive bandpass filter. The design was initially implemented using asynchronously tuned microstrip square open-loop resonators. The EM simulation and the measurement results of the microstrip diplexer were presented and show good agreement with the proposed design theory. The design was also implemented using the substrate integrated waveguide (SIW) technique and results presented and discussed. In comparison to the results achieved with the microstrip diplexer, the EM simulation and the measurement results realised with the SIW diplexer, show that a slightly better insertion loss was attained across both the transmit and the receive channels, respectively
    corecore