3,987 research outputs found
Recommended from our members
Error resilient video transcoding for robust inter-network communications using GPRS
A novel fully comprehensive mobile video communications
system is proposed in this paper. This system exploits
the useful rate management features of the video transcoders and
combines them with error resilience for transmissions of coded
video streams over general packet radio service (GPRS) mobileaccess
networks. The error-resilient video transcoding operation
takes place at a centralized point, referred to as a video proxy,
which provides the necessary output transmission rates with the
required amount of robustness. With the use of this proposed
algorithm, error resilience can be added to an already compressed
video stream at an intermediate stage at the edge of two or more
different networks through two resilience schemes, namely the
adaptive intra refresh (AIR) and feedback control signaling (FCS)
methods. Both resilience tools impose an output rate increase
which can also be prevented with the proposed novel technique in
this paper. Thus, an error-resilient video transcoding scheme is
presented to give robust video outputs at near target transmission
rates that only require the same number of GPRS timeslots as
the nonresilient schemes. Moreover, an ultimate robustness is
also accomplished with the combination of the two resilience
algorithms at the video proxy. Extensive computer simulations
demonstrate the effectiveness of the proposed system
Energy-efficient wireless communication
In this chapter we present an energy-efficient highly adaptive network interface architecture and a novel data link layer protocol for wireless networks that provides Quality of Service (QoS) support for diverse traffic types. Due to the dynamic nature of wireless networks, adaptations in bandwidth scheduling and error control are necessary to achieve energy efficiency and an acceptable quality of service. In our approach we apply adaptability through all layers of the protocol stack, and provide feedback to the applications. In this way the applications can adapt the data streams, and the network protocols can adapt the communication parameters
Error resilient packet switched H.264 video telephony over third generation networks.
Real-time video communication over wireless networks is a challenging problem because
wireless channels suffer from fading, additive noise and interference, which translate
into packet loss and delay. Since modern video encoders deliver video packets with
decoding dependencies, packet loss and delay can significantly degrade the video quality
at the receiver. Many error resilience mechanisms have been proposed to combat packet
loss in wireless networks, but only a few were specifically designed for packet switched
video telephony over Third Generation (3G) networks.
The first part of the thesis presents an error resilience technique for packet switched
video telephony that combines application layer Forward Error Correction (FEC) with
rateless codes, Reference Picture Selection (RPS) and cross layer optimization. Rateless
codes have lower encoding and decoding computational complexity compared to traditional
error correcting codes. One can use them on complexity constrained hand-held
devices. Also, their redundancy does not need to be fixed in advance and any number of
encoded symbols can be generated on the fly. Reference picture selection is used to limit
the effect of spatio-temporal error propagation. Limiting the effect of spatio-temporal
error propagation results in better video quality. Cross layer optimization is used to
minimize the data loss at the application layer when data is lost at the data link layer.
Experimental results on a High Speed Packet Access (HSPA) network simulator for
H.264 compressed standard video sequences show that the proposed technique achieves
significant Peak Signal to Noise Ratio (PSNR) and Percentage Degraded Video Duration
(PDVD) improvements over a state of the art error resilience technique known as
Interactive Error Control (IEC), which is a combination of Error Tracking and feedback
based Reference Picture Selection. The improvement is obtained at a cost of higher
end-to-end delay.
The proposed technique is improved by making the FEC (Rateless code) redundancy
channel adaptive. Automatic Repeat Request (ARQ) is used to adjust the redundancy
of the Rateless codes according to the channel conditions. Experimental results show
that the channel adaptive scheme achieves significant PSNR and PDVD improvements
over the static scheme for a simulated Long Term Evolution (LTE) network.
In the third part of the thesis, the performance of the previous two schemes is
improved by making the transmitter predict when rateless decoding will fail. In this
case, reference picture selection is invoked early and transmission of encoded symbols
for that source block is aborted. Simulations for an LTE network show that this results
in video quality improvement and bandwidth savings.
In the last part of the thesis, the performance of the adaptive technique is improved
by exploiting the history of the wireless channel. In a Rayleigh fading wireless channel,
the RLC-PDU losses are correlated under certain conditions. This correlation is
exploited to adjust the redundancy of the Rateless code and results in higher Rateless
code decoding success rate and higher video quality. Simulations for an LTE network
show that the improvement was significant when the packet loss rate in the two wireless
links was 10%.
To facilitate the implementation of the proposed error resilience techniques in practical
scenarios, RTP/UDP/IP level packetization schemes are also proposed for each
error resilience technique.
Compared to existing work, the proposed error resilience techniques provide better
video quality. Also, more emphasis is given to implementation issues in 3G networks
Real-time image streaming over a low-bandwidth wireless camera network
In this paper we describe the recent development of a low-bandwidth wireless camera sensor network. We propose a simple, yet effective, network architecture which allows multiple cameras to be connected to the network and synchronize their communication schedules. Image compression of greater than 90% is performed at each node running on a local DSP coprocessor, resulting in nodes using 1/8th the energy compared to streaming uncompressed images. We briefly introduce the Fleck wireless node and the DSP/camera sensor, and then outline the network architecture and compression algorithm. The system is able to stream color QVGA images over the network to a base station at up to 2 frames per second. © 2007 IEEE
Reliable and Low-Latency Fronthaul for Tactile Internet Applications
With the emergence of Cloud-RAN as one of the dominant architectural
solutions for next-generation mobile networks, the reliability and latency on
the fronthaul (FH) segment become critical performance metrics for applications
such as the Tactile Internet. Ensuring FH performance is further complicated by
the switch from point-to-point dedicated FH links to packet-based multi-hop FH
networks. This change is largely justified by the fact that packet-based
fronthauling allows the deployment of FH networks on the existing Ethernet
infrastructure. This paper proposes to improve reliability and latency of
packet-based fronthauling by means of multi-path diversity and erasure coding
of the MAC frames transported by the FH network. Under a probabilistic model
that assumes a single service, the average latency required to obtain reliable
FH transport and the reliability-latency trade-off are first investigated. The
analytical results are then validated and complemented by a numerical study
that accounts for the coexistence of enhanced Mobile BroadBand (eMBB) and
Ultra-Reliable Low-Latency (URLLC) services in 5G networks by comparing
orthogonal and non-orthogonal sharing of FH resources.Comment: 11pages, 13 figures, 3 bio photo
Recommended from our members
Cross-Layer Platform for Dynamic, Energy-Efficient Optical Networks
The design of the next-generation Internet infrastructure is driven by the need to sustain the massive growth in bandwidth demands. Novel, energy-efficient, optical networking technologies and architectures are required to effectively meet the stringent performance requirements with low cost and ultrahigh energy efficiencies. In this thesis, a cross-layer communications platform is proposed to enable greater intelligence and functionality on the physical layer. Providing the optical layer with advanced networking capabilities will facilitate the dynamic management and optimization of optical switching based on performance monitoring measurements and higher-layer attributes. The cross-layer platform aims to create a new framework for networks to incorporate packet-scale measurement subsystems and techniques for monitoring the health of the optical channel. This will allow for quality-of-service- and energy-aware routing schemes, as well as an enhanced awareness of the optical data signals. This thesis first presents the design and development of an optical packet switching fabric. Leveraging a networking test-bed environment to validate networking hypotheses, advanced switching functionalities are demonstrated, including the support for quality-of-service based routing and packet multicasting. The investigated cross-layering is based on emerging optical technologies, enabling packet protection techniques and packet-rate switching fabric reconfiguration. Coupled with fast performance monitoring, the platform will achieve significant performance gains within the endeavor of all-optical switching. Allowing for a more intelligent, programmable optical layer aims to support greater flexibility with respect to bandwidth allocation and potentially a significant reduction in the network's energy consumption. The ultimate deliverable of this work is a high-performance, cross-layer enabled optical network node. The experimental demonstration of an initial prototype creates a dynamic network element with distributed control plane management, featuring fast packet-rate optical switching capabilities and embedded physical-layer performance monitoring modules. The cross-layer box enables an intelligent traffic delivery system that can dynamically manipulate optical switching on a packet-granular scale. With the goal of achieving advanced multi-layer routing and control algorithms, the network node requires an intelligent co-optimization across all the layers. The proposed cross-layer design should drive optical technologies and architectures in an innovative way, in order to fulfill the void between the design of basic photonic devices and the networking protocols that use them. The performance of the entire network -- from the optical components, to the routing algorithms and user applications -- should be optimized in concert. This contribution to the area of cross-layer network design creates an adaptable optical pipe that is extremely flexible and intelligent aware of both the physical optical signals and higher-layer requirements. The impact of this work will be seen in the realization of dynamic, energy-efficient optical communication links in future networking infrastructures
- …