1,198 research outputs found
Millimeter-wave Wireless LAN and its Extension toward 5G Heterogeneous Networks
Millimeter-wave (mmw) frequency bands, especially 60 GHz unlicensed band, are
considered as a promising solution for gigabit short range wireless
communication systems. IEEE standard 802.11ad, also known as WiGig, is
standardized for the usage of the 60 GHz unlicensed band for wireless local
area networks (WLANs). By using this mmw WLAN, multi-Gbps rate can be achieved
to support bandwidth-intensive multimedia applications. Exhaustive search along
with beamforming (BF) is usually used to overcome 60 GHz channel propagation
loss and accomplish data transmissions in such mmw WLANs. Because of its short
range transmission with a high susceptibility to path blocking, multiple number
of mmw access points (APs) should be used to fully cover a typical target
environment for future high capacity multi-Gbps WLANs. Therefore, coordination
among mmw APs is highly needed to overcome packet collisions resulting from
un-coordinated exhaustive search BF and to increase the total capacity of mmw
WLANs. In this paper, we firstly give the current status of mmw WLANs with our
developed WiGig AP prototype. Then, we highlight the great need for coordinated
transmissions among mmw APs as a key enabler for future high capacity mmw
WLANs. Two different types of coordinated mmw WLAN architecture are introduced.
One is the distributed antenna type architecture to realize centralized
coordination, while the other is an autonomous coordination with the assistance
of legacy Wi-Fi signaling. Moreover, two heterogeneous network (HetNet)
architectures are also introduced to efficiently extend the coordinated mmw
WLANs to be used for future 5th Generation (5G) cellular networks.Comment: 18 pages, 24 figures, accepted, invited paper
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Understanding Noise and Interference Regimes in 5G Millimeter-Wave Cellular Networks
With the severe spectrum shortage in conventional cellular bands,
millimeter-wave (mmWave) frequencies have been attracting growing attention for
next-generation micro- and picocellular wireless networks. A fundamental and
open question is whether mmWave cellular networks are likely to be noise- or
interference-limited. Identifying in which regime a network is operating is
critical for the design of MAC and physical-layer procedures and to provide
insights on how transmissions across cells should be coordinated to cope with
interference. This work uses the latest measurement-based statistical channel
models to accurately assess the Interference-to-Noise Ratio (INR) in a wide
range of deployment scenarios. In addition to cell density, we also study
antenna array size and antenna patterns, whose effects are critical in the
mmWave regime. The channel models also account for blockage, line-of-sight and
non-line-of-sight regimes as well as local scattering, that significantly
affect the level of spatial isolation
Initial Access in 5G mm-Wave Cellular Networks
The massive amounts of bandwidth available at millimeter-wave frequencies
(roughly above 10 GHz) have the potential to greatly increase the capacity of
fifth generation cellular wireless systems. However, to overcome the high
isotropic pathloss experienced at these frequencies, high directionality will
be required at both the base station and the mobile user equipment to establish
sufficient link budget in wide area networks. This reliance on directionality
has important implications for control layer procedures. Initial access in
particular can be significantly delayed due to the need for the base station
and the user to find the proper alignment for directional transmission and
reception. This paper provides a survey of several recently proposed techniques
for this purpose. A coverage and delay analysis is performed to compare various
techniques including exhaustive and iterative search, and Context Information
based algorithms. We show that the best strategy depends on the target SNR
regime, and provide guidelines to characterize the optimal choice as a function
of the system parameters.Comment: 6 pages, 3 figures, 3 tables, 15 references, submitted to IEEE COMMAG
201
Millimeter-wave Evolution for 5G Cellular Networks
Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular
network requires evolution to increase the system rate 1000 times higher than
the current systems in 10 years. Motivated by this common problem, there are
several studies to integrate mm-wave access into current cellular networks as
multi-band heterogeneous networks to exploit the ultra-wideband aspect of the
mm-wave band. The authors of this paper have proposed comprehensive
architecture of cellular networks with mm-wave access, where mm-wave small cell
basestations and a conventional macro basestation are connected to
Centralized-RAN (C-RAN) to effectively operate the system by enabling power
efficient seamless handover as well as centralized resource control including
dynamic cell structuring to match the limited coverage of mm-wave access with
high traffic user locations via user-plane/control-plane splitting. In this
paper, to prove the effectiveness of the proposed 5G cellular networks with
mm-wave access, system level simulation is conducted by introducing an expected
future traffic model, a measurement based mm-wave propagation model, and a
centralized cell association algorithm by exploiting the C-RAN architecture.
The numerical results show the effectiveness of the proposed network to realize
1000 times higher system rate than the current network in 10 years which is not
achieved by the small cells using commonly considered 3.5 GHz band.
Furthermore, the paper also gives latest status of mm-wave devices and
regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions
on Communications. (Mar. 2015
Integration of Carrier Aggregation and Dual Connectivity for the ns-3 mmWave Module
Thanks to the wide availability of bandwidth, the millimeter wave (mmWave)
frequencies will provide very high data rates to mobile users in next
generation 5G cellular networks. However, mmWave links suffer from high
isotropic pathloss and blockage from common materials, and are subject to an
intermittent channel quality. Therefore, protocols and solutions at different
layers in the cellular network and the TCP/IP protocol stack have been proposed
and studied. A valuable tool for the end-to-end performance analysis of mmWave
cellular networks is the ns-3 mmWave module, which already models in detail the
channel, Physical (PHY) and Medium Access Control (MAC) layers, and extends the
Long Term Evolution (LTE) stack for the higher layers. In this paper we present
an implementation for the ns-3 mmWave module of multi connectivity techniques
for 3GPP New Radio (NR) at mmWave frequencies, namely Carrier Aggregation (CA)
and Dual Connectivity (DC), and discuss how they can be integrated to increase
the functionalities offered by the ns-3 mmWave module.Comment: 9 pages, 7 figures, submitted to the Workshop on ns-3 (WNS3) 201
- …