Concurrent optimization strategies for high-performance VLSI circuits

In the next generation of VLSI circuits, concurrent optimizations will be essential to achieve the performance challenges. In this dissertation, we present techniques for combining traditional timing optimization techniques to achieve a superior performance;The method of buffer insertion is used in timing optimization to either increase the driving power of a path in a circuit, or to isolate large capacitive loads that lie on noncritical or less critical paths. The procedure of transistor sizing selects the sizes of transistors within a circuit to achieve a given timing specification. Traditional design techniques perform these two optimizations as independent steps during synthesis, even though they are intimately linked and performing them in alternating steps is liable to lead to suboptimal solutions. The first part of this thesis presents a new approach for unifying transistor sizing with buffer insertion. Our algorithm achieve from 5% to 49% area reduction compared with the results of a standard transistor sizing algorithm;The next part of the thesis deals with the problem of collapsing gates for technology mapping. Two new techniques are proposed. The first method, the odd-level transistor replacement (OTR) method, performs technology mapping without the restriction of a fixed library size, and maps a circuit to a virtual library of complex static CMOS gates. The second technique, the Static CMOS/PTL method, uses a mix of static CMOS and pass transistor logic (PTL) to realize the circuit, using the relation between PTL and binary decision diagrams. The methods are very efficient and can handle all ISCAS\u2785 benchmark circuits in minutes. On average, it was found that the OTR method gave 40%, and the Static/PTL gave 50% delay reductions over SIS, with substantial area savings;Finally, we extend the technology mapping work to interleave it with placement in a single optimization. Conventional methods that perform these steps separately will not be adequate for next-generation circuits. Our approach presents an integrated solution to this problem, and shows an average of 28.19%, and a maximum of 78.42% improvement in the delay over a method that performs the two optimizations in separate steps

A Fast And Accurate Technique To Optimize Characterization Tables For Logic Synthesis

Cell characterization data is used by synthesis and timing verification tools to compile and validate a cell netlist which meets timing constraints imposed by the designer. Characterization tables contain data for multiple, simple equations representing a cell's behavior and are an alternative to the single, monolithic characteristic equation. Data in the table is fit to a function whose form is fixed by the application, and the cell's response is interpolated from the function. Tables can potentially increase accuracy, but large tables can cause a program to use dramatically more memory and run much slower. The optimization of characterization tables, in which accuracy is maintained but table size is significantly reduced, is important if large programs, such as synthesis, are to complete accurately and in a reasonable runtime. In this paper we address some of the issues involved in characterizing cells and optimizing characterization tables quickly and accurately. Experimental result..