Simple network management protocol co- existence with hydrocarbon process automation communication real-time network

Hydrocarbon Process Automation Applications (HPAA) utilizes Real-time network connecting process instrumentations, controllers, and real-time logic control applications. Conventional practice is to dedicate a real-time network for process automation applications and prevent other applications from utilizing the same infrastructure. An important application that can help optimize, improve network performance, and provide rapid response time in network diagnostics and mitigation is Simple Network Management Protocol (SNMP). This paper addresses the co-existence of SNMP traffic with real-time applications. The impacts of activating this protocol with the real-time HPAA utilizing high speed Ethernet network design will be examined. Empirical data for an implemented Hydrocarbon process automation system will be used to illustrate the interdependency of application performance, traffic mix, and potential areas of improvements. The outcomes of this effort demonstrate the co-existence of SNMP with HPPA, given special considerations (i.e., bandwidth, number of applications, etc.)

Secondary Frequency and Voltage Control of Islanded Microgrids via Distributed Averaging

In this work we present new distributed controllers for secondary frequency and voltage control in islanded microgrids. Inspired by techniques from cooperative control, the proposed controllers use localized information and nearest-neighbor communication to collectively perform secondary control actions. The frequency controller rapidly regulates the microgrid frequency to its nominal value while maintaining active power sharing among the distributed generators. Tuning of the voltage controller provides a simple and intuitive trade-off between the conflicting goals of voltage regulation and reactive power sharing. Our designs require no knowledge of the microgrid topology, impedances or loads. The distributed architecture allows for flexibility and redundancy, and eliminates the need for a central microgrid controller. We provide a voltage stability analysis and present extensive experimental results validating our designs, verifying robust performance under communication failure and during plug-and-play operation.Comment: Accepted for publication in IEEE Transactions on Industrial Electronic

Networked PID control design : a pseudo-probabilistic robust approach

Networked Control Systems (NCS) are feedback/feed-forward control systems where control components (sensors, actuators and controllers) are distributed across a common communication network. In NCS, there exist network-induced random delays in each channel. This paper proposes a method to compensate the effects of these delays for the design and tuning of PID controllers. The control design is formulated as a constrained optimization problem and the controller stability and robustness criteria are incorporated as design constraints. The design is based on a polytopic description of the system using a Poisson pdf distribution of the delay. Simulation results are presented to demonstrate the performance of the proposed method

FMI Compliant Approach to Investigate the Impact of Communication to Islanded Microgrid Secondary Control

In multi-master islanded microgrids, the inverter controllers need to share the signals and to coordinate, in either centralized or distributed way, in order to operate properly and to assure a good functionality of the grid. The central controller is used in centralized strategy. In distributed control, Multi-agent system (MAS) is considered to be a suitable solution for coordination of such system. However the latency and disturbance of the network may disturb the communication from central controller to local controllers or among agents or and negatively influence the grid operation. As a consequence, communication aspects need to be properly addressed during the control design and assessment. In this paper, we propose a holistic approach with co-simulation using Functional Mockup Interface (FMI) standard to validate the microgrid control system taking into account the communication network. A use-case of islanded microgrid frequency secondary control with MAS under consensus algorithm is implemented to demonstrate the impact of communication and to illustrate the proposed holistic approach.Comment: Proceedings of the IEEE PES ISGT Asia 2017 conferenc

Concurrent Design of Embedded Control Software

Embedded software design for mechatronic systems is becoming an increasingly time-consuming and error-prone task. In order to cope with the heterogeneity and complexity, a systematic model-driven design approach is needed, where several parts of the system can be designed concurrently. There is however a trade-off between concurrency efficiency and integration efficiency. In this paper, we present a case study on the development of the embedded control software for a real-world mechatronic system in order to evaluate how we can integrate concurrent and largely independent designed embedded system software parts in an efficient way. The case study was executed using our embedded control system design methodology which employs a concurrent systematic model-based design approach that ensures a concurrent design process, while it still allows a fast integration phase by using automatic code synthesis. The result was a predictable concurrently designed embedded software realization with a short integration time